I neeed a help in installing my home theatre system ..............plz hlp somebuddy

i wanted to connect my sony Blu-ray Disc/DVD Home Theatre System BDV-E970W to my LCD bravia tv. when i go to my wire connection i.e (input).I click on HDMI slot 1 which i connected my home theatre but there is no display appearing not a sound and not a pictue.i connected it to other HDMI port but the condition is the same,then i checked my HDMI cable with my laptop the cable does good...so i m bit confused...

The BDV-E970W is not a product sold in the U.S. market. I would recommend checking the "troubleshooting" section of your owner's manual, or contacting your local home theatre store or your country's Sony Helpline for further support.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Similar Messages

  • How iPhone  controls my Bose home theatre system ACROSS THE STREET!!!

    1) I purchased an Aiport Express
    2) I installed the free version of "Signal" http://www.alloysoft.com/
    3) Finally hook everything up and turn on the Signal App & iTunes & BAM!!! your friends now envy you.....
    Note: be sure to click the correct setting ("Computer" or "Airport") at the bottom of iTunes once you have it all hooked up & running, you may have to configure a port to get Signal running which is very easy.. look on Signals support page for instruction.
    Message was edited by: jerry junior

    Thanks for the reply. I tried but failed. There's no sound through the Home Theatre system ( Bose 3.2.1 GS). The audio audio always come through the TV which is connected to the ATV. Please help. Thanks

  • HT5517 How do I connect my Home Theatre System to Apple TV such that I Can Play the Music on my iPhone through the Home Theatre System.

    How do I connect my Home Theatre System to Apple TV such that I Can Play the Music on my iPhone through the Home Theatre System?

    Thanks for the reply. I tried but failed. There's no sound through the Home Theatre system ( Bose 3.2.1 GS). The audio audio always come through the TV which is connected to the ATV. Please help. Thanks

  • Apple TV won't connect properly to Sony home theatre system using hdmi cable.

    Using an HDMI cable to the port on the home theatre system I can get sound, but the picture is intermittent. It Comes on for 1second, goes of for 10 seconds.
    If I connect directly to the TV using the HDMI to DVI-D cable it works, but because I am using a Fujitsu plasmavision it is a monitor only with no speakers.
    Would really like to get this to work and don't understand why the video signal is intermittent from the blueray player. Other inputs into the player through the HDMI port work OK (such as a set top box).

    Just installed my Vizio SoundBar with my new LG TV & Apple TV 2... The trick to get the Apple TV 2 to send audio to the Soundbar is on the Apple TV Menu under audio change it to 16 bit. Boom it works.

  • Model # BDV-N8100W - Blu-ray Disc DVD Home Theatre System

    Serial Number Location: At the rear of the unit.
    Attachments:
    Warranty_455717203.pdf ‏111 KB
    BDVN8100W_mksp.pdf ‏250 KB
    BDV-N7100W_N8100W_N9100W_qs_EN_ES.pdf ‏2891 KB
    BDV-N7100W_N8100W_N9100W_install_EN_ES_FR.pdf ‏1200 KB
    BDVN7100W_N8100W_9100W.pdf ‏5293 KB

    I found that 32522 worked the first time when all others didn't.Set the volume lock as per the insrtuctions and wala!dickgoode wrote:
    HELP ??? I cannot find a code that works between my COMCAST Infinity Silver/Platinum Remote Control and my SONY combination Blu Ray DVD Player and Receiver called the SONY BD/DVD Home Theatra System Model BDV-E500W.  Can you help me find the programming code to program up Comcast Remote to control the functions of this SONY DVD Player & Receiver ???  Thanks so much !!! 

  • Model # BDV-N7100W - Blu-ray Disc DVD Home Theatre System

    Serial Number Location: At the rear of the unit.
    Attachments:
    BDVN7100W_mksp.pdf ‏238 KB
    Warranty_455717203.pdf ‏111 KB
    BDV-N7100W_N8100W_N9100W_install_EN_ES_FR.pdf ‏1200 KB
    BDV-N7100W_N8100W_N9100W_qs_EN_ES.pdf ‏2891 KB
    BDVN7100W_N8100W_9100W.pdf ‏5293 KB

    I found that 32522 worked the first time when all others didn't.Set the volume lock as per the insrtuctions and wala!dickgoode wrote:
    HELP ??? I cannot find a code that works between my COMCAST Infinity Silver/Platinum Remote Control and my SONY combination Blu Ray DVD Player and Receiver called the SONY BD/DVD Home Theatra System Model BDV-E500W.  Can you help me find the programming code to program up Comcast Remote to control the functions of this SONY DVD Player & Receiver ???  Thanks so much !!! 

  • Panasonic sc bt 200 Home theatre system & Panasonic tx-l37v10b

    I have just purchased an Apple Tv to connect to my home theatre system and LCD TV.
    I can get the picture through HDMI cable (port 4) but the sound is the virgin cable TV.
    I can't get my head round the configuration and which cable needs to go where!
    Anyone help or is it not possible to have all 3 working
    Thanks James

    Thanks Winston I have connected the Apple Tv to the HDMI on the TV port 4
    Amy

  • Sony HT-SS2300 Home Theatre System Problem w/Video signal on TV Monitior

    My Panasonic HD/Plasma TV will not pick up the HDMI video signal coming from the home theatre system. The TV monitor picture blinks in and out. I have a Comcast HD box (Motorola) What do I need to do to fix. I had the HDMI cable from the Motorola box to the HDMI Sat In connection. I then ran a HDMI out connection from the Home Theatre system to the TV HDMI in. Is ther a work around?
    I also purchased a Samsung blue ray disc player. Can I still use the HDMI connection to the Home Theatre system from the Blue Ray HDMI and the the HDMI out to the HDMI input to the TV? This is getting confusing?
    Please help.

    Ok I feel your collective pain, really. We have apple tv 2 with optical out to amp and hdmi into the tv. My wife and I both have iPads, iPhones, Mac book pro etc. sometimes the volume control would be on apple remote (at bottom, left to right slider) and we would be punching the air saying how much we love this technology. And then.......often the volume control would disappear then we couldn't get it working at all today. I have just gone through all our devices and changed the apple user name and password to my wife's user name on iTunes.....BANG.....everything is working perfect now. We have each others iTunes and apple tv now on all remotes WITH volume control. This would explain why it was so intermittent. Try this and see if it makes a difference. Even if you have a device, say iPad, that you didn't think you would use as a remote, make sure you put in the same apple I'd and password across all devices. To change it on iPad go to settings then music or iPod on ipad1 and use the same username.
    Good luck and happy tunes.
    Clarkegriswold.

  • Laptop Audio to Sony Home Theatre System DAV DZ151KB

    Hello, I have a laptop (Acer make) and I want its audio to come off my Sony Home Theatre System - model DAV DZ 151 KB. I have tried using the cable with 3.5mm pin on both sides. One was into the laptops headphone socket and the other in the Audio-In port on the front side of the music system. It is not working though. Any suggestions which cable shall be used? Please help. Thanks in advance, Aniruddha

    Thanks for the reply.
    I had done a bit more digging after posting this question and found out that, although it gives excellent surround sound for DVD, TV and the Sky+ box that it did receive poor reviews at time of release because of the inability to connect anything other than the TV and Sky+ box to it.
    I bought it 4 years ago when I knew very little of these things so it's a lesson learned and a mistake I won't make when replacing it.
    Just got to convince the wife to let me replace it now......

  • REmote Code for SONY Blu Ray Home Theatre System Model BDV-E500W ???

    HELP ??? I cannot find a code that works between my COMCAST Infinity Silver/Platinum Remote Control and my SONY combination Blu Ray DVD Player and Receiver called the SONY BD/DVD Home Theatra System Model BDV-E500W.  Can you help me find the programming code to program up Comcast Remote to control the functions of this SONY DVD Player & Receiver ???  Thanks so much !!!

    I found that 32522 worked the first time when all others didn't.Set the volume lock as per the insrtuctions and wala!dickgoode wrote:
    HELP ??? I cannot find a code that works between my COMCAST Infinity Silver/Platinum Remote Control and my SONY combination Blu Ray DVD Player and Receiver called the SONY BD/DVD Home Theatra System Model BDV-E500W.  Can you help me find the programming code to program up Comcast Remote to control the functions of this SONY DVD Player & Receiver ???  Thanks so much !!! 

  • How can I play my ITunes music stored on my IMac via Apple TV through my home theatre system and control it from my IMac?

    My ITunes library is stored on my IMac which is connected to B&W desktop speakers. My music system is connected to my IMac via USB through a Benchmark DAC. I use Pure Music software and am able to simultaneously play music on my IMac in my study and my main music system in the living room.
    My home theatre system is connected by Apple TV via the home network to the IMac. I can access my ITunes library from the TV using the Apple TV remote control. But when I try to play music from the computer and stream to the TV / home theatre, I am unable to make the connection. I tried activating Airplay, but I still cannot get the music to play.
    I would appreciate any advice on how to set this up.

    Thanks for the suggestion. I subsequently realized that my Airplay settings on ITunes are ok. The problem is with the settings on Pure Music. I still havent figured this out. When i stream using just ITunes, it works fine, but when I play music using ITunes / Pure Magic, I still have an issue with Apple TV.

  • Wireless Home Theatre System Interfering with my Macbookpro to Airport

    I brought a wireless 6.1 home theatre system for my living room and now my macbook pro cannot link up to my airport (the flat one) that is located in my bedroom when I'm watching dvd and wants to work on my macbook pro at the same time. Turning on internet robustness doesn't work.
    If I switch off the system, my macbook pro detects the airport immediately and connects.
    The frustrating thing is that when my home theatre system is on, my macbook pro detects most of my neighbours' wireless routers except my airport!
    Is there a workaround? Thanks in advance.

    sparkblessedbe, Welcome to the discussion area!
    Configure your AirPort Extreme base station (AEBS) to use a different channel. Change the channel until you find one that works or you run out of channels.

  • Sony HTSS360 home theatre system & Apple TV issue

    I picked up this system yesterday and connected the Apple TV via hdmi but got no audio or video. Does it matter what brand of hdmi cable? Are there cables that are copyright compliant and some that aren't? Is this the issue or something else?

    Welcome to the Apple Community.
    Does your home theatre system have an HDMI or optical input.

  • Sony BRAVIA Sound bar home theatre system

    I just bought one of those Sony BRAVIA sound bar home theatre systems & I am trying to hook up my old model vcr/dvd combo so I can get surround sound on the dvd player. My husband & I have almost tried everything & it still won't work. It doesn't have an HDMI or an Optical hook up on the back of the vcr/dvd player. How can I hook up the surround sound to play through the vcr/dvd player?

    The bravia sound bar has analog hoook up as well.......what you will do is take the red & white audio cables.....and plug them into the OUT of the existing dvd player and then plug them to the IN red & white jacks on the back of the bravia sound bar system.

  • Macbook 2008 sound to Home Theatre System which only has optical audio.

    Trying to connect my macbook (2008) to panasonic home theatre system which only has optical audio. Tried using toslink optical audio cable with 3.5mm jack converter but still no sound, any ideas please? Thanks

    If I understand what you are saying then yes you are correct. If you want the sound from your tv to come out of your home theatre amplifier run an optical caple from the TV out to one of the inputs on your receiver. Then select that source when you want to listen to the tv. In order to get 5.1 sound though the program source will have to be broadcast in dolby digital. Other wise it will most likely be dolby pro logig or stereo depending on how your receiver is set up.
    It will probably also output sound for your blu ray player as well through the tv because hdmi carries audio to your tv. However the best possible sound will come from hooking the hdmi cable directly up to your receiver and selecting that source during dvd playback. Which is the way you have it if I understand correctly.
    Paul

Maybe you are looking for