I-Pad keyboard issue: Shows in two sections instead of one.

I have a first generation I-Pad. The issue that has developed is that the keyboard shows in two pieces on the screen rather than just the one as intended. How can I rest the keyboard so it appears as one complete keyboard?

Pull the two ends together toward the middle with your fingers or Tap and hold down on the the little keyboard icon in the lower right corner and select Dock and Merge.
Settings>General>Keyboard>Split Keyboard>Off.

Similar Messages

Obiee 11.1.1.6.6 - analysis displays two dates instead of one prompted

Hi all,
my analysis somehow displays two dates instead of one prompted.
How can it be?
Tell me please what additional information should I include for you to help me.
obiee 11.1.1.6.6
Upd: prompt screenshots
http://marchello.ccx-grads.org/img/BI_prompt_001.png
http://marchello.ccx-grads.org/img/BI_prompt_002.png

This is from "Administration" -> "Manage Sessions" section of obiee
1) everything seems fine, WHERE clause shows correct date
SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/VB/8.RB-213.BI.1';SELECT
   0 s_0,
   "VB"."VBIREP8"."AASYSDATE" s_1,
   "VB"."VBIREP8"."ADAY" s_2,
   "VB"."VBIREP8"."AMONTH" s_3,
   "VB"."VBIREP8"."ARCDATE" s_4,
   "VB"."VBIREP8"."AYEAR" s_5,
   "VB"."VBIREP8"."CONTRAGENTID" s_6,
   "VB"."VBIREP8"."CONTRAGENTNAME" s_7,
   "VB"."VBIREP8"."CREDITS" s_8,
   "VB"."VBIREP8"."DEPOSITARY" s_9,
   "VB"."VBIREP8"."DEPOSITS" s_10,
   "VB"."VBIREP8"."IDENTIFYCODE" s_11,
   "VB"."VBIREP8"."OVERDAY30" s_12,
   "VB"."VBIREP8"."RESTRUCTURED" s_13,
   "VB"."VBIREP8"."SEGMENT" s_14,
   "VB"."VBIREP8"."STATUS" s_15,
   "VB"."VBIREP8"."TOBO" s_16
FROM "VB"
WHERE
(CAST("VBIREP8"."ARCDATE" AS DATE) = date '2013-08-15')
ORDER BY 1, 3 ASC NULLS LAST, 4 ASC NULLS LAST, 6 ASC NULLS LAST, 5 ASC NULLS LAST, 7 ASC NULLS LAST, 8 ASC NULLS LAST, 12 ASC NULLS LAST, 15 ASC NULLS LAST, 16 ASC NULLS LAST, 9 ASC NULLS LAST, 14 ASC NULLS LAST, 13 ASC NULLS LAST, 11 ASC NULLS LAST, 10 ASC NULLS LAST, 17 ASC NULLS LAST, 2 ASC NULLS LAST
FETCH FIRST 100000001 ROWS ONLY
2) and now attention, I press "next rows" arrow, my WHERE clause is simply ABSENT!
SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/VB/8.RB-213.BI.1';SELECT
   0 s_0,
   "VB"."VBIREP8"."AASYSDATE" s_1,
   "VB"."VBIREP8"."ADAY" s_2,
   "VB"."VBIREP8"."AMONTH" s_3,
   "VB"."VBIREP8"."ARCDATE" s_4,
   "VB"."VBIREP8"."AYEAR" s_5,
   "VB"."VBIREP8"."CONTRAGENTID" s_6,
   "VB"."VBIREP8"."CONTRAGENTNAME" s_7,
   "VB"."VBIREP8"."CREDITS" s_8,
   "VB"."VBIREP8"."DEPOSITARY" s_9,
   "VB"."VBIREP8"."DEPOSITS" s_10,
   "VB"."VBIREP8"."IDENTIFYCODE" s_11,
   "VB"."VBIREP8"."OVERDAY30" s_12,
   "VB"."VBIREP8"."RESTRUCTURED" s_13,
   "VB"."VBIREP8"."SEGMENT" s_14,
   "VB"."VBIREP8"."STATUS" s_15,
   "VB"."VBIREP8"."TOBO" s_16
FROM "VB"
ORDER BY 1, 3 ASC NULLS LAST, 4 ASC NULLS LAST, 6 ASC NULLS LAST, 5 ASC NULLS LAST, 7 ASC NULLS LAST, 8 ASC NULLS LAST, 12 ASC NULLS LAST, 15 ASC NULLS LAST, 16 ASC NULLS LAST, 9 ASC NULLS LAST, 14 ASC NULLS LAST, 13 ASC NULLS LAST, 11 ASC NULLS LAST, 10 ASC NULLS LAST, 17 ASC NULLS LAST, 2 ASC NULLS LAST
FETCH FIRST 100000001 ROWS ONLY
Sure, I receive another date (01.02.2013). Just one thing is strange here - why do I receive only one extra date (I should receive ALL dates in Oracle table when I perform query without any WHERE clause).

When typing an email, when I go to next line, it skips two lines instead of one line. How do I correct it?

I was typing an email and when I would go to the next line, it will skip two lines instead of one line. How do I correct the problem?

I am not sure I understand the problem. Could you include a screenshot of it right after it happens?
If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Producedure givng two rows instead of one row

Hi
Please find below my procedure..when I execute this proc...displays two rows instead of one row. Please help me incase if I did mistake.
CREATE PROCEDURE SP_CWCTravel_Cruise_Amenities_S(
        @Cruise_Line_Code varchar(2500) = NULL,
        @Ship_Code varchar(2500) = NULL,
        @Sail_Id varchar(100) = NULL,
        @Base_Price decimal(8, 2),
        @Category_Groups varchar(2500) = NULL,
        @Categories varchar(2500) = NULL,
        @Rate_Codes varchar(2500) = NULL,
        @Booking_Date VARCHAR( 10 ),
        @Sail_Start_Date VARCHAR( 10 )
AS
BEGIN
    SELECT TOP 1 *
    FROM CWCTravel_Cruise_Amenities_Definition as cad
                                JOIN CWCTravel_Cruise_Amenities_Definition_Date_Range AS caddr
                                ON cad.id = caddr.Amenities_Definition_Id
    WHERE Cruise_Line_Code in (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Cruise_Line_Code))
        AND (Min_Base_Price = 0 OR Min_Base_Price <= @Base_Price)
        AND (Max_Base_Price = 0 OR Max_Base_Price >= @Base_Price)
        AND (Ship_Code IS NULL OR Ship_Code = '' OR Ship_Code IN (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Ship_Code)))
        AND (Sail_Id IS NULL OR Sail_Id = '' OR Sail_Id IN (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Sail_Id)))
        AND (Rate_Codes IS NULL OR Rate_Codes = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Rate_Codes)) A,
                                                                                   (SELECT REPLACE(REPLACE(Item,'?', '_'), '*', '%') Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Rate_Codes)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
                                AND (Category_Groups IS NULL OR Category_Groups = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Category_Groups)) A,
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Category_Groups)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
                AND (Categories IS NULL OR Categories = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Categories)) A,
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Categories)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
                                AND (@Booking_Date is null or @Booking_Date=''
                                                                                                OR (( caddr.from_date IS NULL OR caddr.from_date <= @Booking_Date ) AND ( caddr.to_date IS NULL OR caddr.to_date >= @Booking_Date )
                                                                                AND (( caddr.date_range_type IS NULL ) OR ( caddr.date_range_type = 'BOOK_DATE' ))) )
    union
    SELECT TOP 1 *
    FROM CWCTravel_Cruise_Amenities_Definition as cad
                                JOIN CWCTravel_Cruise_Amenities_Definition_Date_Range AS caddr
                                ON cad.id = caddr.Amenities_Definition_Id
    WHERE Cruise_Line_Code in (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Cruise_Line_Code))
        AND (Min_Base_Price = 0 OR Min_Base_Price <= @Base_Price)
        AND (Max_Base_Price = 0 OR Max_Base_Price >= @Base_Price)
        AND (Ship_Code IS NULL OR Ship_Code = '' OR Ship_Code IN (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Ship_Code)))
        AND (Sail_Id IS NULL OR Sail_Id = '' OR Sail_Id IN (SELECT item FROM SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Sail_Id)))
        AND (Rate_Codes IS NULL OR Rate_Codes = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Rate_Codes)) A,
                                                                                   (SELECT REPLACE(REPLACE(Item,'?', '_'), '*', '%') Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Rate_Codes)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
                                AND (Category_Groups IS NULL OR Category_Groups = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Category_Groups)) A,
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Category_Groups)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
                AND (Categories IS NULL OR Categories = '' OR ((SELECT COUNT(*) FROM
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(@Categories)) A,
                                                                                   (SELECT Item FROM dbo.SF_CWCTravel_GetStrTableFromCommaSeparatedStr(Categories)) B
                                                                                    WHERE A.Item LIKE B.Item) > 0))
        AND (@Sail_Start_Date is null or @Sail_Start_Date=''
                                                                                                OR (( caddr.from_date IS NULL OR caddr.from_date <= @Sail_Start_Date ) AND ( caddr.to_date IS NULL OR caddr.to_date >= @Sail_Start_Date )
                                                                                AND (( caddr.date_range_type IS NULL ) OR ( caddr.date_range_type = 'TRAVEL_DATE' ))) )
    ORDER BY Cruise_Line_Code DESC, Ship_Code DESC, Sail_Id DESC, Rate_Codes DESC, Category_Groups DESC, Categories DESC
ENDWhile executing this SP
I am getting the following results.
2043 23-07-2010 AM 11:22:10 23-08-2011 PM 04:57:19 8 princess caribbeanPrincess 2043 20-08-2011 AM 12:00:00 30-11-2011 AM 12:00:00 BOOK_DATE
2043 23-07-2010 AM 11:22:10 23-08-2011 PM 04:57:19 8 princess caribbeanPrincess 2043 01-10-2011 AM 12:00:00 30-11-2011 AM 12:00:00 TRAVEL_DATE
I need only the first record.
Thanks in adv
Rekha

871270 wrote:
Hi
Please find below my procedure..when I execute this proc...displays two rows instead of one row. Please help me incase if I did mistake.Seriously?
You wrote a query against tables we've never seen, containing data we can't possibly have any idea about and you expect us to be able to help you?
Please go discuss this with someone in your organization who understands the data model and have them explain to you how it is supposed to work.
Put yourself in our situation (forum volunteers) ... if we threw some arbitrary code with no explanation as to what it does, what the data model looks like and what's supposed to be happening, do you think you'd be very successful ?

Keyboard my keyboard has split into two sections? How can I restore it?

My key board has split into two sections, not sure how I did it but can I restore it ?

From the iPad User Guide (tap to enlarge):

Email to MMS on iOS 6 shows two senders instead of one?

I've been using a group email to forward messages to several recipient's email and MMS. Ever since upgrading to iOS 6, the users with iPhones receiving the message through their carrier's mms email ([email protected] for example) show that the message was from two people, and not one. It shows as coming from myself, and then also the address that the original message was sent to (ie. the group email). The problem is, if they reply, the reply is sent to the entire group of 30 people instead of just me. Didn't have the problem before the update, but it is consistent ever since. Any idea how to overcome this? I've tested out iPhone 4, 4S and 5, with iOS 6 and 6.0.1.

I have the same issue - the new folder appeared in the Videos app on the iPad when I downloaded How I Met Your Mother season 6 episode 3 directly on the iPad. Previously I had downloaded episodes 1 and 2 on my Mac, and then transferred them to the iPad doing a Sync in iTunes. So now I have two icons for Season 6 of How I Met Your Mother in the Videos app on my iPad: one with episode 3 that I downloaded on the iPad itself, and one with episodes 1 and 2 that I downloaded on my Mac. Both have the same folder name, and both have the same icon for Season 6.
Were you able to resolve the issue? A complete reboot of the iPad did not resolve the issue for me.
Many thanks,
Pete

Showing report data columns into two rows instead of one row using SSRS 2012

Hi All,
I have a ssrs report with 13 columns and I want to show those 13 columns data into two rows instead of showing in one row. please send me step by step process.
id     fullname     firstname      lastname        mailingaddress     billingaddress
city       state       zipcode
1       ABC                A                  C
    xyz                      xyz123                   york
PA         12345
homephone     cellphone          workphone          company
1234567890      4567890123    0123456789         ABC,Inc
id     fullname     firstname      lastname        mailingaddress     billingaddress
city          state     zipcode
2        XYZ               X                  Z
     abc                     abc123           lewisburg
PA      54321
homephone     cellphone           workphone        company
4567890123      0123456789     1234567890         xyz,Inc
id     fullname     firstname      lastname        mailingaddress     billingaddress
city          state     zipcode
3       BCD                  B                  D
123abc                 xyz123               leesburg       PA
54123
homephone     cellphone          workphone        company
4567895623      0783456789     1238967890      Hey,Inc
Thanks in advance,
RH
sql

Do a right mouse click on the left, gray row marker => "Insert Row"=> "Inside Group
- Above or Below", then you get a second detail row.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Two rows instead of one in the database when form with 2 data blocks.

Hi All,
I have created a form having 2 data blocks
data block one to populate table A
data block two to populate table B .
now when i save the data after pressing the save option ....i find 2 records instead of one in the database table A and Table B.
it should have been just one per table ....can some one suggest pls
Sunny

ok : step by step :
do you have a trigger created named "ON-INSERT" on
the block?Many thanks for your support....
I do not have an ON-insert trigger.....
I will explain my scenerio.....
I have 2 data blocks one-below the other in the form
accessing 2 different tables....
now on the canvas of this form I have added a
button....and on that button i have written a trigger
'when-button-pressed' Trigger....
it takes the data from the various text_items of the
form and inserts them into their corrosponding
tables....and I have added 'COMMIT' at the end this
trigger
so when I press this button ....the data 2 records
get inserted into the 2 tables instead of one each..
TIA
Sunnythe above form looks something like this.....
-------------------------------------------------------------------------------------------------------|
|------------------------------------------------------------------------------------------------------|
| |
| ---data_block1------------------------------------------------------ |
| | | |
| | some data entry here for emp1 table | |
| |__________________________________________ | |
| |
| |
| |
| ---data_block2------------------------------------------------------ |
| | | |
| | some data entry here for dept1 table | |
| |__________________________________________ | |
| |
| button1 |
|-------------------------------------------------------------------------------------------------------

Issue while mapping two entity column into one entity column

Not able to succeed with when trying to join 2 entity columns to an entity.
Entity A Id, AName, ADesc, AQty
Entity B Id, AName, BQty
Entity C Id, AName, CQty
Mapping Entity A to Entity B & Entity C with column reference, not able to succeed with two joins.
EntityA
@OneToMany
@Column(name = "ANAME")
private List<EntityB> bName = new ArrayList();
private List<EntityC> cName = new ArrayList();
EntityB
@ManyToOne
@JoinColumn(name = "ANAME")
private EntityA enitityA;
EntityC
@ManyToOne
@JoinColumn(name = "ANAME")
private EntityA enitityA;
Join work only for EntityB, not for EntityC...
Please, give me your suggestions.

A few issues:
- You need the @OneToMany on both fields, not just the first one
- A @OneToMany cannot use an @Column, it should use a mappedBy="entityA"
See,
http://en.wikibooks.org/wiki/Java_Persistence/OneToMany

I was setting up my Airport and thought the first set up did not go through, so I set up again and I ended up with two accounts instead of one. How can I manage to have only one account now? Thanks for the help.

I was setting up my Airport and thought the first set up dod not go through, then I set up again and ended up with two wireless accounts. I use it for the prointer and the iPad, and I can see both accounts in the iPad. How do I get rid of one account? Thanks for the help!

me.com accounts can be used for iCloud. See the FAQ section in:
<http://support.apple.com/kb/ht4895>
but it may be too late if you have already created a new AppleID.
A few years ago Apple said they were working on allowing account merging, but it never happened (maybe objections from copyright holders).

How to display mapviewer labels in two lines instead of one?

Hi,
I have been using the addJDBCTheme to display the map along with the labels as follows:
mapviewer.addJDBCTheme("aaa","a", "SELECT geom, col1 || ':' || col2 label_value from table_name","GEOM","","styleName","label_value","T.ROAD NAME" ,false);
So the label is displayed as col1Value:col2Value.
Now I need to display the label as follows:
col1Value
col2Value
I tried using this
mapviewer.addJDBCTheme("aaa","a", "SELECT geom, col1 || chr(10) || col2 label_value from table_name","GEOM","","styleName","label_value","T.ROAD NAME" ,false);
But it doesnt work. This displays col1Valuecol2Value
So I tried using this:
mapviewer.addJDBCTheme("aaa","a", "SELECT geom, col1 label_value from table_name UNION ALL SELECT geom, col2 label_value from table_name","GEOM","","styleName","label_value","T.ROAD NAME" ,false);
This actually works. Meaning it displays the label in two lines. But the two lines are almost attached together, there is no space between them at all. It is sometimes very difficult to read.
Would really appreciate any suggestions to resolve this issue.
Is there any other solution to display a label in two lines? I tried changing the label style to set the line-height. But that does'nt work either.
Lakshmi

Multiline label aren't supported as yet.
JayantDoes MapViewer 10.1.3 (the latest version for present) support it?

Ipad deletes TWO emails instead of one

I use iPad when traveling so it is not often. It worked fine as to trash items but now does the following. When I click on an email and select the trash bin, it goes to the trash but so does the next one after it. I do not like this so what is going on and how do I stopit? Thank you.

I have the same issue - the new folder appeared in the Videos app on the iPad when I downloaded How I Met Your Mother season 6 episode 3 directly on the iPad. Previously I had downloaded episodes 1 and 2 on my Mac, and then transferred them to the iPad doing a Sync in iTunes. So now I have two icons for Season 6 of How I Met Your Mother in the Videos app on my iPad: one with episode 3 that I downloaded on the iPad itself, and one with episodes 1 and 2 that I downloaded on my Mac. Both have the same folder name, and both have the same icon for Season 6.
Were you able to resolve the issue? A complete reboot of the iPad did not resolve the issue for me.
Many thanks,
Pete

When i take a picture with my iphone camera it goes into two folders instead of one how do i stop this from happening

well my old iphone broke ish so when i conected it to itunes everyphoto i had when on my computer as a folder
so when i got my new iphone i sync it to the computer
but now every time i take a photo it goes into two seperate folders
on my old folder and my new one

Looks like it is time for the young birds to leave the nest just a little.
Family Sharing - Apple Support
ÇÇÇ

How can I get back to screen which shows ALL e-mails instead of one at a time. Cecilia Juarez

My screen show one full e-mail; not a list of all my e-mails. I was deleting old e-mails & clicked on the enlarge option at the top of screen and have not been able to get a list of my e-mails on the screen at the same time. Help please.

Sounds like you opened a message in a new window. Have you tried closing that window and see what happens?
If that is not it maybe you can post a screen shot of what you are seeing.

OSB always uses two volumes instead of one

Hi
I use osb and the following script to backup my db:
run {
CONFIGURE RETENTION POLICY TO Redundancy 3;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
allocate channel c1 device type sbt parms 'ENV=(OB_MEDIA_FAMILY=mftest)';
delete noprompt obsolete device type sbt;
backup database include current controlfile;
release channel c1;
I have read in oracle docs that when AUTOBACKUP oprion is ON, the 'include current controlfile' at the end of the backup command, causes rman to form one backup piece for both the database and controlfile.
But It always uses one volume for database backup and one volume for control file backup, although there is enough space on one volume for both of them. What can I do to backup both of them on one volume?
thanks

The problem was that I needed to put
editListDB.destroyItemEditor();
before the Alert.show() function.
Thanks for your help!

I-Pad keyboard issue: Shows in two sections instead of one.

Similar Messages

Maybe you are looking for