Load Excel file to infocube

Hi,
when I load Excel file to infoCube, I got the following error
"Value 'All ' (hex. '41006C006C00 ') of characteristic ZATYPE contains invalid character"
I check in the Excel file I didn't find string 'All',
What should else I have to check ?
Thx

Hi,
Flat file load
1) The file shld be in correct format , which you are specifying in Infopackage.
2) All Number /qty / amount etc shld not contain comma, i mean you need to format excel values as number by rght click select number.
3) Your data source and file structure shld map.
4) All the characteristics value which have no" lower case check ed in properties"  shld get only capital letters data.
5) Special characters some time throw error ( which will be maintained in RSKC t-code)
Hopefully these are the thing to follow,
/message/8269057#8269057 [original link is broken]
Edited by: SKDDON on Oct 15, 2009 3:16 PM

Similar Messages

  • "Failed to load excel file" an Error Message while running TDS upgrade util

    Dear All,
    "Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
    Please help me out on this!!!!!!!!!!!!
    Thanks..........

    Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
    Thanks,
    Gordon

  • Error loading Excels Files, BOExelAdapter, Dataservice, Linux

    Data service is runing in linux, the job server is runing, however can't load excels files, I got the next message:
    " Error preparing to read <Query>: <Following error was received while listening for client connections: 'etldwh_srv:4001'.
                                                                Stopped listening for new connections. (BODI-40)
                                                                Could not start (Adapter: 'BOExcelAdapter').>."
    how can verify if the Adapter for Excel is runing, how can restar the Adapter?
    Thanks for your help,

    have you configured BOExcelAdapter instance ? is your jobserver enabled for Adapter ?
    check the documentation to enable job server for managing the Adapter and a configure a instance of BOExcelAdapter, and start the Adapter instance

  • How to load Excel files into DB on Unix?

    Hi folks,
    Question>
    ======================================
    Our source db is on HPUX, and we have Excel files transported onto the HPUX via FTP everyday, how can I load the Excel data into the source db with Heterogeneous Services on Unix?
    I know that we can do these if the source db is on Windows as that way we can create the System DSN in Windows ODBC Administrator before we configurate HS listener/tnsname.
    But in this case, it's on Unix! Is ODBC available on Unix? What shall i do?
    Do you have any idea?
    Thanks & Have a nice day everyone!
    eilison
    [email protected]

    check this out
    http://www.unixodbc.org/

  • Load excel file value to graph problem(about x-axis value)

    Hello,everyone,I have this problem.
    When I load the excel file which I saved before,the waveform came out normally,but the x-axis of graph waveform was not shown the number I want,it shown the number based on the no.of samples.
    What I want is plot the x-axis value based on the rate(pts/s).For this case,rate is 50prs/s,so after calculation...0.02s per reading.totally is 20 seconds.I tried to use XY-Graph,but didn't solve out.
    Jerry
    LV 7.1
    Attachments:
    delete 0 array.vi ‏14 KB
    test3.txt ‏20 KB
    Create Waveform Graph1.vi ‏275 KB

    is it always 0.02s per reading or did you get this figure from some calculation?? in anyway, you just connect that value (the constant 0.02 or calculated amount) to a Property Node... you link the Property Node to Waveform Graph 2... under property choose X-Scale -> Offset and Multiplier -> Multiplier...
    i'm not sure if this is the best method but hope it helps... i've tried it on your code and it works...
    Best Regards,
    JQ
    LV 8.0 user...

  • How to load excel files from my SharePoint site to Excel client by using Power Query

    Hello,
    I am using Power Query to import some Excel files from shared documents on SharePoint site. After I type the URL of my SharePoint site into the filed, the expected Excel files do not appear in Power Query. Please provide the method as soon as possible.
    Thanks!

    Could you check if
    this post can help?

  • Loading Excell file for BI production

    Hi Experts,
    Can any one please let me now how to load Xcell file directly to BI Production  which is Non Modifiable.
    Please Expecting Earliest

    HI,
    I just want to make sure about few points initially.
    You already have the following fields in your cube 0pur_c01
    1.Material code
    2.Vendor code Vendor name
    3.Plant
    4.Purchase Org
    5.Purchase Order
    6.Purchase order date
    7.landed price
    8.Variance (budget price-landed price)
    Is Variance = budget price-landed price ???
    If variance data is already available in the cube. Then directly you can calculate Budget price in the query designer by creating a NEW FORMULA where Budget Price = Variance + landed price.
    By doing this directly Budget Price will be calculated and will appear in the report.
    But you have to load Budget Price from the flat file, follow the below steps.
    Create a Flat file with Budget Price and any Characteristic(for example Material code) and save it as .CSV format.
    On BW side create info Object for Budget price and take same info object for Material code. create a cube with these two fields. Create Datasource, Info Package, run the infopackage, create dtp and run it, Once the data comes in to the Zcube, create the multiprovider over the 0pur_c01 and this Zcube.
    Hope it helps
    Regards,
    Sravan.

  • How to debug this error? trying to load excel file to Database

    SSIS package "c:\users\asubedi\documents\visual studio 2012\Projects\Integration Services Project1\Integration Services Project1\PackageToLoadBuyerDedupe.dtsx" starting.
    Information: 0x4004300A at BuyerDedupe, SSIS.Pipeline: Validation phase is beginning.
    Error: 0xC0209303 at PackageToLoadBuyerDedupe, Connection manager "Excel Connection Manager": The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.
    An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
    Error: 0xC001002B at PackageToLoadBuyerDedupe, Connection manager "Excel Connection Manager": The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine. For more information, see http://go.microsoft.com/fwlink/?LinkId=219816
    Error: 0xC020801C at BuyerDedupe, Excel Source [2]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209303. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error: 0xC0047017 at BuyerDedupe, SSIS.Pipeline: Excel Source failed validation and returned error code 0xC020801C.
    Error: 0xC004700C at BuyerDedupe, SSIS.Pipeline: One or more component failed validation.
    Error: 0xC0024107 at BuyerDedupe: There were errors during task validation.
    SSIS package "c:\users\asubedi\documents\visual studio 2012\Projects\Integration Services Project1\Integration Services Project1\PackageToLoadBuyerDedupe.dtsx" finished: Failure.
    how to debug this issue?

    Hi Arjunji,
    The issue occurs because you have only 32-bit Microsoft ACE 12.0 OLEDB drivers installed, however, the package runs in 64-bit runtime mode which requires 64-bit drivers.
    To avoid this issue, you need to either install the 64-bit
    Microsoft Access Database Engine 2010 Redistributable or run the package in 32-bit runtime mode. To run the package in 32-bit runtime mode, in SSDT, you can set the Run64BitRuntime property of the IS project to False; in a SQL Server Agent job, you can
    configure the SSIS Package Job step and check the “Use 32 bit run time” option.
    In addition, please note that the 32-bit install file of Microsoft Access Database Engine 2010 Redistributable and the 64-bit one cannot be installed side by side on a single server. However, if your current ACE 12.0 OLE DB drivers are installed by 32-bit
    Office suit, you can go ahead and install the 64-bit Microsoft Access Database Engine 2010 Redistributable.
    Regards,
    Mike Yin
    TechNet Community Support

  • How to load excel-csv file into oracle database

    Hi
    I wanted to load excel file with csv extension(named as trial.csv) into
    oracle database table(named as dept),I have given below my experiment here.
    I am getting the following error,how should I rectify this?
    For ID column I have defined as number(5) datatype, in my control file I have defined as interger external(5),where as in the Error log file why the datatype for ID column is comming as character?
    1)my oracle database table is
    SQL> desc dept;
    Name Null? Type
    ID NUMBER(5)
    DNAME CHAR(20)
    2)my data file is(trial.csv)
    ID     DNAME
    11     production
    22     purchase
    33     inspection
    3)my control file is(trial.ctl)
    LOAD DATA
    INFILE 'trial.csv'
    BADFILE 'trial.bad'
    DISCARDFILE 'trial.dsc'
    APPEND
    INTO TABLE dept
    FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"'
    TRAILING NULLCOLS
    (ID POSITION(1:5) INTEGER EXTERNAL(5)      
    NULLIF ID=BLANKS,
    DNAME POSITION(6:25) CHAR
         NULLIF DNAME=BLANKS
    3)my syntax on cmd prompt is
    c:\>sqlldr scott/tiger@xxx control=trial.ctl direct=true;
    Load completed - logical record count 21.
    4)my log file error message is
    Column Name Position Len Term Encl Datatype
    ID           1:5 5 , O(") CHARACTER
    NULL if ID = BLANKS
    DNAME 6:25 20 , O(") CHARACTER
    NULL if DNAME = BLANKS
    Record 1: Rejected - Error on table DEPT, column ID.
    ORA-01722: invalid number
    Record 21: Rejected - Error on table DEPT, column ID.
    ORA-01722: invalid number
    Table DEPT:
    0 Rows successfully loaded.
    21 Rows not loaded due to data errors.
    0 Rows not loaded because all WHEN clauses were failed.
    0 Rows not loaded because all fields were null.
    Bind array size not used in direct path.
    Column array rows : 5000
    Stream buffer bytes: 256000
    Read buffer bytes: 1048576
    Total logical records skipped: 0
    Total logical records read: 21
    Total logical records rejected: 21
    Total logical records discarded: 0
    Total stream buffers loaded by SQL*Loader main thread: 0
    Total stream buffers loaded by SQL*Loader load thread: 0
    5)Result
    SQL> select * from dept;
    no rows selected
    by
    balamuralikrishnan.s

    Hi everyone!
    The following are the steps to load a excell sheet to oracle table.i tried to be as simple as possible.
    thanks
    Step # 1
    Prapare a data file (excel sheet) that would be uploaded to oracle table.
    "Save As" a excel sheet to ".csv" (comma seperated values) format.
    Then save as to " .dat " file.
    e.g datafile.bat
    1,Category Wise Consumption Summary,Expected Receipts Report
    2,Category Wise Receipts Summary,Forecast Detail Report
    3,Current Stock List Category Wise,Forecast rule listing
    4,Daily Production Report,Freight carrier listing
    5,Daily Transactions Report,Inventory Value Report
    Step # 2
    Prapare a control file that define the data file to be loaded ,columns seperation value,name and type of the table columns to which data is to be loaded.The control file extension should be " .ctl " !
    e.g i want to load the data into tasks table ,from the datafile.dat file and having controlfile.ctl control file.
    SQL> desc tasks;
    Name Null? Type
    TASK_ID NOT NULL NUMBER(14)
    TASK_NAME VARCHAR2(120)
    TASK_CODE VARCHAR2(120)
    : controlfile.ctl
    LOAD DATA
    INFILE 'e:\datafile.dat'
    INTO TABLE tasks
    FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
    (TASK_ID INTEGER EXTERNAL,
    TASK_NAME CHAR,
    TASK_CODE CHAR)
    The above is the structure for a control file.
    Step # 3
    the final step is to give the sqlldr command to execute the process.
    sqlldr userid=scott/tiger@abc control=e:\controlfile.ctl log=e:\logfile.log
    Message was edited by:
    user578762

  • How to automate the loading of excel file

    Hi Guru,
    As we know we can load excel file through ODI but their is some manual work we have to do each time and it will only support in Windows platform
    How we can load excel file through ODI in Unix system and it should be automate so in one directory i got this file it should able to load the data automatically no manual intervention required.

    On windows jdbc-odbc bridge is used to read from excel file. Since such odbc setup is available only on windows hence the restriction. If there is any type 4 jdbc driver available for excel that it would works on unix too. 

  • For Each Loop Load Dynamic Excel Files

    Hi All,
    SSIS 2005
    I want to load excel file .xls one at a time files that have different names without having to select the file in the connection manager, every time. So a user can easily place the excel file in the folder and right the sql job and it loads the file data.
    The data flow tasks all work when I manually select the excel file, but I am unable to get this to work dynamically.
    I have setup a for each loop with multiples data flow tasks and sql tasks to load my data from file.
    Variables:
    @filename d:\new file\*.xls
    For Each Loop:
    ForEachFile Enumerator
    Folder: d:\new file\
    Files: *.xls
    Retrieve File Name: Fully Qualified
    Variable Mappings:
    User::filename (index 0)
    Connection Managers:
    Excel Connection Manager: Expressions, ConnectionString @[User::filename]
    Error Message: Error at new buyer(package name) the connection string format is not valid. it must consist of one or more components of the form X=Y, seperated by semicolons.
    Can anyone assist thanks.

    You still need the file name variable.
    ExcelFilePath is the fully qualified file name of your Excel file. ie. it contains both the path and file name.
    e.g. D:\inbox\myExcelFile.xls
    All the steps you mentioned are correct, except you need to set the property of ExcelFilePath of the Excel connection to the variable that you map to in the ForEach Loop:
    Connection Managers:
    Excel Connection Manager: Expressions, ExcelFilePath @[User::filename]
    Hope this helps.
    ~ J.

  • Opening Excel file in HTML

    Hi All,
    Does anyone know how to launch Excel file in HTML or jsp?
    Wait...i know one method to open Excel fiel using
    Window.open(blah...blah..)
    In this case we can specify toolbar option..
    But in my application i am loading excel file in frame.But frame doesnt have any option to set toolbar.....
    Please let me know if you have soln for this....
    Regards,
    Surya

    Hi,
    I can open excel file using window.open...but my requirement is forcing me to open it in frame....And i m able to open it properly in frame...but i want toolbar to come along with that frame...
    according to folowing lin they say it is not possible have scenario like this...
    http://support.microsoft.com/kb/157353/EN-US/
    Please see whether you can help in this regard...

  • How to load flat files to BI

    Hi All,
    I am new to SAP BI. PLease tell me how to load excel files to BI.

    hi,
    For BI 7.0 basic step to laod data from flat (excel files) files for this follow the beloww step-by step directions ....
    Uploading of master data
    Log on to your SAP
    Transaction code RSA1u2014LEAD YOU TO MODELLING
    1. Creation of Info Objects
    u2022 In left panel select info object
    u2022 Create info area
    u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
    u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
    u2022 Create required info objects and Activate.
    2. Creation of Data Source
    u2022 In the left panel select data sources
    u2022 Create application component(AC)
    u2022 Right click AC and create datasource
    u2022 Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
    u2022 In general tab give short, medium, and long description.
    u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
    u2022 In proposal tab load example data and verify it.
    u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
    u2022 Activate data source and read preview data under preview tab.
    u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
    3. Creation of data targets
    u2022 In left panel select info provider
    u2022 Select created info area and right click to select Insert Characteristics as info provider
    u2022 Select required info object ( Ex : Employee ID)
    u2022 Under that info object select attributes
    u2022 Right click on attributes and select create transformation.
    u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    u2022 Activate created transformation
    u2022 Create Data transfer process (DTP) by right clicking the master data attributes
    u2022 In extraction tab specify extraction mode ( full)
    u2022 In update tab specify error handling ( request green)
    u2022 Activate DTP and in execute tab click execute button to load data in data targets.
    4. Monitor
    Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
    BW 7.0
    Uploading of Transaction data
    Log on to your SAP
    Transaction code RSA1u2014LEAD YOU TO MODELLING
    5. Creation of Info Objects
    u2022 In left panel select info object
    u2022 Create info area
    u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
    u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
    u2022 Create required info objects and Activate.
    6. Creation of Data Source
    u2022 In the left panel select data sources
    u2022 Create application component(AC)
    u2022 Right click AC and create datasource
    u2022 Specify data source name, source system, and data type ( Transaction data )
    u2022 In general tab give short, medium, and long description.
    u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
    u2022 In proposal tab load example data and verify it.
    u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
    u2022 Activate data source and read preview data under preview tab.
    u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
    7. Creation of data targets
    u2022 In left panel select info provider
    u2022 Select created info area and right click to create ODS( Data store object ) or Cube.
    u2022 Specify name fro the ODS or cube and click create
    u2022 From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
    u2022 Click Activate.
    u2022 Right click on ODS or Cube and select create transformation.
    u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    u2022 Activate created transformation
    u2022 Create Data transfer process (DTP) by right clicking the master data attributes
    u2022 In extraction tab specify extraction mode ( full)
    u2022 In update tab specify error handling ( request green)
    u2022 Activate DTP and in execute tab click execute button to load data in data targets.
    8. Monitor
    Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
    Regards,
    ANI

  • How to Load the data from excel file(Extension is .CSV) into the temp.table

    Hi
    How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
    My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
    Kindly Suggest the Solution.
    Regards,
    Sachin

    Hello Sachin,
    You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
    Instead of copy values into forms you can save them in your temporary table.
    Kind regards,
    Alex
    If someone's helpful or correct please mark it accordingly.

  • How to load the data from excel file into temprory table in Forms 11g?

    Hi
    How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
    My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
    Kindly Suggest the Solution.
    Regards,
    Sachin

    Declare
        v_full_filename         varchar2(500);
        v_server_path           varchar2(2000);
        v_separator             VARCHAR2(1);
        v_filename              VARCHAR2(400);
        filename                VARCHAR2 (100);
        v_stop_load             varchar2 (2000);
        v_rec_error_log         varchar2(4000);
        v_error_log             varchar2(4000);
        ctr                     NUMBER (12);
        cols                    NUMBER (2);
        btn                     number;
        RES                     BOOLEAN;   
        application             ole2.obj_type;
        workbooks               ole2.obj_type;
        workbook                ole2.obj_type;
        worksheets              ole2.obj_type;
        worksheet               ole2.obj_type;
        cell                    ole2.obj_type;
        cellType                ole2.OBJ_TYPE;
        args                    ole2.obj_type;
        PROCEDURE olearg
        IS
        args   ole2.obj_type;
        BEGIN
        args := ole2.create_arglist;
        ole2.add_arg (args, ctr);                                
        ole2.add_arg (args, cols);                                   
        cell := ole2.get_obj_property (worksheet, 'Cells', args);
        ole2.destroy_arglist (args);
        END;
    BEGIN
    v_full_filename := client_get_file_name(directory_name => null
                                     ,file_name      => null
                                     ,file_filter    => 'Excel  files (*.xls)|*.xls|'  
                                                                            ||'Excel  files (*.xlsx)|*.xlsx|'                                                                 
                                     ,message        => 'Choose Excel file'
                                     ,dialog_type    => null
                                     ,select_file    => null
    If v_full_filename is not null Then
    v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
    v_filename := v_separator||v_full_filename ;
    :LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);                                
    RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));     
    --Begin load data from EXCEL
    BEGIN
        filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
        application := ole2.create_obj ('Excel.Application');
        ole2.set_property (application, 'Visible', 'false');
        workbooks := ole2.get_obj_property (application, 'Workbooks');
        args := ole2.create_arglist;
        ole2.add_arg (args, filename); -- file path and name
        workbook := ole2.get_obj_property(workbooks,'Open',args);
        ole2.destroy_arglist (args);
        args := ole2.create_arglist;
        ole2.add_arg (args, 'Sheet1');
        worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
        ole2.destroy_arglist (args);
        ctr := 2;                                                     --row number
        cols := 1;                                                -- column number
        go_block('xxx');
        FIRST_RECORD;  
        LOOP       
                --Column 1 VALUE --------------------------------------------------------------------
            olearg;
            v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
            :item1 := v_stop_load;
            cols := cols + 1;                                                      
              --Column 2 VALUE --------------------------------------------------------------------
            olearg;
            :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
            cols := cols + 1;
            --<and so on>
        ole2.invoke (application, 'Quit');
        ole2.RELEASE_OBJ (cell);
        ole2.RELEASE_OBJ (worksheet);
        ole2.RELEASE_OBJ (worksheets);
        ole2.RELEASE_OBJ (workbook);
        ole2.RELEASE_OBJ (workbooks);
        ole2.RELEASE_OBJ (application);
    END;
    --End load data from EXCELPlease mark it as answered if you helped.

Maybe you are looking for