I posted this message in the iWeb section and they suggested I try here...

I posted the following message on the iWeb bulletin board, and it was suggested that the error I am getting might be an OS issue instead of an iWeb issue.
message is as follows:
iWeb will not publish to .Mac. After pressing publish, the program signs into .mac and then proceeds to create the web pages. Once all the pages are created circles form next to their consecutive sites. These usually fill up like a clock showing the site being uploaded. However, for the past few days nothing happens once the circles appear. Then after a few minutes iWeb crashes. Also, during this time my whole computer freezes. iTunes will stop playing until the iWeb crash is complete. This has happened every time I have tried to publish over the past few days. Just last week I was able to publish without any problems.
I think there might be a problem with .mac because I am able to publish to a folder without any problems.
I have repaired permissions over and over again...
The only thing new I added to my mac since my last time I publish something in iWeb was the trial version of File Maker's Bento.
Here is the error message I get from the crash.
Parent Process: launchd 82
Date/Time: 2008-01-14 16:57:18.418 -0500
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 14
--- finished---
Today, safari crashed with the same error message.
I do not think this is not a network connection problem because I tried both at home and at school with the same result. I also remember that I recently installed a security update that was released several months ago. At the time of the release it was close to finals, and I could not risk losing my laptop...
Thank you in advance!
Message was edited by: mindmeltdown

I was able to get it to work...
After creating a new user account, I moved the domain file over to the new account.
However, I still had the problem where iWeb would crash.
I was able to publish when I moved the previous domain file to another folder and tried with a new site a and domain file.
For me this meant that somehow my old domain file had become corrupt. I was really upset. I had kept a blog regularly for over two years and now everything was lost.
Or was it? Before all this started, after two years of using the same template for creating my blog, I changed everything over to a new theme. Previously I had put a lot of my photos up with iWeb. But, during my conversion I erased those photo pages and decided to go with the new gallery feature. This took my web site from over 400 MB down to a mere 30 MB. It was after this conversion that I started to have problems with iWeb crashing.
(Before I had made conversions to different templates on other web sites I have made using iWeb without a problem. So, I did not have a reason to think that was the cause.)
Anyway, thinking I had lost two years worth of blog entries I was desperate. So, I tried something drastic. I erased the contents of the Web folder on my idisk. And this did the trick. It seems that going from over 400 MB to 30 MB was too much for iWeb to handle at one time. Now that it is a brand new site, it up loads without a problem.
Just in time too. I needed iWeb to get another site up and going!
Before trying to upload I did not have to erase the .plist file or anything to get it to work.
I also did not reinstall iWeb or Mac OS X.
I wish you the VERY best of luck!!
P.S. I did not get an responses here either. However, the people in the iPhoto group were very helpful!

Similar Messages

Hi i have just bought a used ibook from goodwill and need to reset the id and password.is there anyway to do this? i called tech support and they said to try here because our ibook is considered opsolete and they can't help me. thanks

hi before i start i did not steal it, i bought a used ibook and need to know if there is a way to reset or get past the old user id and pass word. we bought it from goodwil so no way to ask old owner and i called tech support and it is conciderd opsolete so no help from them and know one in this area works on mac. so what can i do? this is for my daughter and we are not rich thats why we bought used. thanks for any help.

Here are the instructions, as I have them:
Press the Command + s key during startup. This takes you to Single User Mode, where you will see a command line.
Type this when the command-line prompt (>) appears:
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
When the iBook restarts, you will see the setup screen. This allows you to create a new account. BE SURE to give yourself administrative privileges. You can now use this new account and set it to log in automatically with this new account if you don't want to be bothered with the login screen every time you start up.
You can also delete the old account if you want to free up some hard drive space.
Good luck!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
However, it is desirable to do it with the disc, if it is available, which is why I waited to see if the user has the disc before supplying the instructions for doing it via Single User Mode.

Hi, I don't really know wether I should post this message in the iPad sect

Hi,
I don't really know wether I should post this message in the iPad section or in this section... Anyway.
Here is my problem :
I would like to stream music from my iPad to my living room soundsystem, so I bought an Airport Express. BUT my router is upstairs, and I can't set up a permanent Ethernet connection between my router & Airport Express.
So my question is : Is it possible to set up the Airport Express as a "distinct network" (not connected to the internet) and Have the iPad connect on Both networks ?
* my usual LAN to surf the net & everything else
* The airport Network to stream music to the soundsystem
If my setup is wrong, i'm obviously open to any advice... Just keep in mind that I can't have a wired connection between the Airport Express & the Router...
Many thanks in advance for your answers.

Before to close this topic and mark it as solved, I will explain the whole process, so if you find this, you can try it directly... French version hereunder.
Hardware setup :
- Bbox2 Modem router provided by my ISP
- PC with latest version of Airport Utility
- Airport Express connected to amplifier (Jack - Double RCA) and to the router through Ethernet (the whole purpose of this is to remove this Ethernet cable).
Before you begin :
Open your router configuration utility (typically 192.168.1.1 or 192.168.0.1 in your browser). Change your network password (by default, mine was the 26 characters WEP key - 13 letters and 13 numbers). Choose a 13 characters password. I chose one with 7 letters followed by 6 numbers. Waring : This operation might (should ?) crash your current internet connexion and you may experience problems reconnectiong. Under Win 7, Go to the properties --> security of your network to type your new password & connect again.
Once this is done :
1. Open the Airport Utility on your computer
2. Do a "hard reset" of the Airport Express" (AE) using a pen or a paperclip --> the AE disappears from the Airport utility, then shows up again.
3. Select "replace the settings with default settings" to clean up the mess your previous attempts might have caused
4. You're back to the default configuration
5. On the Airport utility window you see now, invent a new password for the AE & clic continue
6. Select "I want AE to join my current network" (3rd option), clic on "Continue".
7. Select "I want AE to wirelessly join my current network" (1st Option), clic on continue
8. Select your network in the drop down menu and select "WEP 128 bits" as encryption mode (Your network obviously has to use WEP encryption. If it's not the case, go back to your router management utility and set the security to WEP or write another tutorial
9. Clic on "Update"
10. Watch your LAN crash
11. Say "What the F**" and unplug the Ethernet cable from the AE. Your LAN should get better very quickly.
12. Accidentally unplug the AE from the wall. Plug it again quickly with 2 or 3 "Sh** !"
You're done !
French version :
Préalable :
Configuration hardware :
- Modem router Bbox2 fourni par mon FAI (Belgacom)
- PC avec la dernière version de Airport Utility
- Airport Express connecté à un ampli (Jack - Double cinch) et au routeur via un câble Ethernet (le but de la manoeuvre est de virer ledit câble Ethernet)
Ouvrir l'utilitaire de configuration de votre routeur (192.198.1.1 dans le navigateur par exemple) et changer là le mot de passe du réseau (anciennement chez moi : la clé WEP de 26 caractères) en choisissant un mot de passe d'exactement 13 caractères (chiffres et lettres mêlées ont fonctionné pour moi). Attention, cette opération peut avoir des retombées un peu bizarres sur votre connexion... Deux redémarrages de Bbox et pas mal d'essais de reconnexion m'ont été nécessaires.
Une fois cela fait :
1. Ouvrez l'Airport utility
2. Opérez un Hard reset de l'airport avec un trombone --> l'AE disparait de l'utility, puis réapparaît
3. Sélectionner "Replace the settings with default settings" histoire de virer tout merdier d'essais précédents.
4. Vous êtes de retour à la configuration "de base"
5. Sur l'écran qui s'affiche alors, inventez un nouveau mot de passe pour l'AE puis Cliquez sur "continuer"
6. Sélectionnez "I want Export Express to Join my current network (3ième option)" puis cliquez sur "continuer"
7. Choisissez "I want AE to wirelessly Join my current network (1ière option)" puis cliquez sur "continuer"
8. Sélectionnez votre réseau dans la liste déroulante et sélectionnez "WEP" comme mode de cryptage (il faut évidemment que votre réseau soit crypté en WEP. Si ce n'est pas le cas, passez en WEP ou faites un nouveau tuto...
9. Cliquez sur "Update"
10. Regardez votre réseau local se planter en beauté...
11. Débranchez le câble de l'AE. Le réseau local devrait se sentir beaucoup mieux
12. Retirez accidentellement l'AE de la prise. Rebranchez-le vite fait avec 2-3 "Mert".
You're done !

I took My iPod to this place at The milpitas mall And they replaced my brokend screen I had it for a week it shut off and I could not turn it on any more decided to take it back they told me to leave and they would call me they stole it what can I do?

What can I do if they don't want to guide it back at me

Report it to the police. If they are a shop in the mall they should be easier to track down (the trick is seeing if the police will take the case).
In the future I would not deal with unauthorized shops. Only deal with Apple or AASPs (Apple Authorized Service Providers). It may cost more but you don't run the risk of getting scammed or having faulty work done.

I forwarded a message using my iPhone 5. Now, every time I send a new message (through Send A Message in the Contacts section), that forwarded message automatically appears in the message box (as if it were a template). How do I fix this?

If I send a message directly through Messages, that forwarded message does not appear in the message box.
But I would like to not have that message as the template for my texts.
How do I take this "template" out?
Thank youu!

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

I hope this is in the correct section....

I have an opinion to put out here into the community to see what everyone else thinks. I've been a huge Mac fan after switching over in 2006, but I haven't spent a lot of time here. I'd like to hear what some of the more experienced Mac users think.
I bought my late-2006 model iMac in 2006. It came with good ol' Tiger - don't remember what version it was. But, I did use it until 10.4.11 I think, or maybe 10.4.12? It wasn't until early 2010 that I went up to 10.6 (when the updates stopped for 10.4). 10.6 was flawless for me until I just recently moved to 10.7. It's been flawless as well - so far. So now I'm reading that 10.8 is next summer. Apple seems to be moving at lighting speeds on these OS versions. I have seen no real improvements since 10.6.
As of this summer, OS X 10.8 will say goodbye to my computer, and I love my white iMac. It has served me well, and it still does serve me well. I no longer participate in the gaming community, and I suppose if I did I wouldn't be using an all-in-one machine likely anyway. Six years of computing bliss, at least compared to my Windows days. (Actually, I hate it when people compare "Macs" to "Windows". You can't compare computers to OS's - that's a different story altogether, but I'll leave the reference here for the sake of making my point.) My iMac still looks as new as it did the day that I took it out of the box, with it's still-shrink-wrapped remote sticking to the side of the monitor like a forgotten toy. But now I'm a little perturbed, and you might expect it's because I won't be receiving any support for my computer after this summer arrives. That's not exactly it.
My machine is an Intel machine - not a Motorola. 10.7 has already cut the throats of those who use Rosetta-based software - now with 10.8 they are cutting off their first line of Intel-based machines. And for what? Do you mean to tell me that the limited variety of hardware in these machines is too much to support for a new OS? I could see if these machines were 32-bit, but they are 64-bit!! My little Core 2 Duo runs just as fast with 10.7 as it did with 10.4, maybe faster.
I planned on buying a new iMac soon before all of this anyway, but now with all of these OS releases every year it makes me wonder how long my $1500.00+ investment is going to go next time. If I buy a new iMac today, will I get six years out of it? I know that six years is a lot of time for a machine these days anyway; much longer than most will stick with one. But I'm one of those people that don't fix things that aren't broke. As long as my computer does what I need it to do, and it's not bogging down all of the time, I'm not buying a new one. I just can't see disposing of my iMac (or selling for almost nothing) because I can't update it anymore. I wonder how long they will release updates for 10.7?
I suppose this is just all new to me because with the way budget PC's work with Windows, you don't get cut from OS support because each piece of hardware is replaceable. (Driver support) And, it's a very long time in between Windows versions where CPU is going to cut you out, or Microsoft just quits providing updates. So, it this basically how the Apple guys and gals work? I feel sorry for those who bought a G5 iMac. They were cut off after 10.5 I guess, with no more than three years of OS support.
As I said, I know that it's time for me to update my iMac anyway, and I don't want it to sound like I'm speaking ONLY because my machine will be left behind. I just don't see why it's necessary. And just for fun, I think I'll pull out my 12 year old PC and install Windows 7 on it tomorrow. (Sorry - couldn't resist.)

Well, I was asked when I posted the message whether or not the post was to be marked as a "question" and I answered no. And as such, it is more of an opinion collection sort of post. But then, I did decided to include some questions. I went back and skimmed my message and counted four questions. The question marks are dead giveaways.
I understand this message board is commonly used for topics such as, "How do I boot my computer?" or "What's the best way to back up my computer?", and so I chose the message topic carefully. If this type of dialog doesn't belong here or is not accepted in this community, please feel free to move it, have it moved, or delete it. I just thought I might get some feedback from those who have been using Macs for some time. The tone of the first response suggests that I may have struck a nerve somewhere. Rest assured, it's only an observation from an individual that has been involved with computers for 28 years.

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

And did you then actually purge the cache?
Please realize that you have given ZERO details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Why does this message appear: The item you've requested is not currently available in the U.S. store. When I open iTunes?

For no discernible reason when I opened iTunes and selected the iTunes Store, this message appeared:
The item you've requested is not currently available in the U.S. store.
rebooted computer. Flushed iTunes cache. I see lots of references to this in older posts (2012 and earlier) but nothing recent.

There are several posts about this in the last 15 minutes
Look around.
Be patient, itunes will correct their issue.

HT4059 While downloading a book from iTunes, my internet service was interrupted and i didn't get the entire book. Now when i try to download it, i get the message that i already have downloaded it. It hit the download button in the purchased section, and

While downloading a book from iTunes, my internet service was interrupted and i didn't get the entire book. Now when i try to download it, i get the message that i already have downloaded it. It hit the download button in the purchased section, and nada! How can i re-download the book?

Hi Peggs,
Try this:
Open your iBooks app on your iPad
Select the Store Button at the top
Select Purchased at the bottom
You will see your AppleID on the right at the bottom, then Redeem, then Support
Click on your Apple ID, and when the AppleID window comes up with the options, Sign Out
Then Sign In again and try redownloading your book
Hope this helps!
Cheers,
GB

Crash report application what is that ? When shut down the computer this Message appeared The application crash repórter Dont Let shut down the computer

Crash report aplication what is that ? When shut the computer this Message appeared The application crash repórter Dont Let shut down the computer

Command-Option-Escape does the same as
Apple Menu > Force Quit...
It opens a floating box that lists current major Applications and their status (e.g., Not responding) and allows you to force quit any single Application or re-launch the Finder.

Please fix your web plugin immediately, yes this message in the right forum

Ok.
On my mac, java takes about 5-10 seconds to load in a web page applet from either safari or chrome.
This is 4.9 to 9.9 seconds too long.
PC is a bit faster but not much.
Sun absolutely wrecked java with respect to the web-client.
Please fix this.
Why: Because I want to write web-apps which don't suck. Which means I can't use javascript. Because despite the gajillions of money poured into marketing, it is really very, very slow.
How to fix:
It is very easy.
1. Use PhoneME with JIT. (get startup time to near zero). You might say, "well, we're about to get java to have zero startup time." But this is what you have been saying for ever, and failing at, miserably! Stop trying, give us a JavaME plugin instead.
2. Do NOT distribute monolithic massive class libraries. Instead, give me the opportunity to create class loaders. (I know you think you already do, but please look up the 10 year old bugs regarding the web plugin and class loaders). Make the distributable as SMALL as possible.
3. Are you writing the pluginin "in-between" code in webkit? If you are, fire who ever is writing it. If you aren't, WTF, the connection between the browser and java is slow as a slug. If I was just a bit more of a cynic I would think google is putting in usleep(1000) between calls. Take this code over NOW.
Look, you STILL have a tremendous opportunity in the web-client-space.
You need to show that Java is BETTER than javascript. Which it could be.
But currently it sucks.
It uses too much memory, it has a slow startup time, the connection between javascript and java is slow.
I should be able to write <script type="jar.pack.gz/java" src="blahblah.jar.pack.gz"></script> and multiply my performance by a thousand. Please do it.
I should be able to use a java2javascript library to simplify modifying the dom.
I shouldn't have to write javascript, except for inline code.
BUT INSTEAD I'M SPENDING MY TIME OPTIMIZING GWT.
Javascript sucks, we all know it is rising because of a vacuum of any real performance.
Please fill this void, or someone else will.
Thanks,
-tim

yes this message in the right forum No it isn't. This is a user to user forum. If you want Oracle's attention, submit a bug report, or contact their support channels.
Locking this thread.

Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?

Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?

try this...
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes.

Mac OSX, 10.7.5, LR 5.6 After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it. Why is it doing this?

Mac OSX, 10.7.5, LR 5.6 After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it. Why is it doing this?

I am experiencing Mavericks failing to copy subdirectories from usb sticks, I am backing up game saves from a console. Both sticks I use are fine, same permissions of course since the console wrote the files. Sometimes it copies, sometimes it doesn't. It seems to be related to the mounting process.
Thank God Apple hasn't (yet) broken bash.

I purchased photoshop 9 previously and I now have a new laptop that does not have a 'disk' tray. Where do I download this from to put on my new laptop? I went to the download section and there is no download for English

I purchased photoshop 9 previously and I now have a new laptop that does not have a 'disk' tray. Where do I download this from to put on my new laptop? I went to the download section and there is no download for English

I assume you mean Photoshop Elements 9.
Download from: Download Photoshop Elements products | 9, 8, 7

I posted this message in the iWeb section and they suggested I try here...

Similar Messages

Maybe you are looking for