I  put back the logic board and optical drive and it wont start up i have a metal  piece left over smaller tha an inch

no power up could this metal band be for the power button or does it assumes the screeen is closed

Your question is like me saying, I put my car engine together and I have a part left over. Now the car won't start. Do you think the left over part has something to do with it not starting?
Of course it does and as well you may also have assembled the parts incorrectly, or maybe you broke something when putting it together, maybe static electricity zapped a component. Just as you don't know why my car won't start after I put it together, we don't know why your computer won't start.

Similar Messages

  • Setting up new MBP with SSD and optical drive and restoring from Time Capsule

    Hi Everyone-
    Sorry if this has been addressed before, but I couldn't find a specific answer by searching.  My last macbook was stolen, but luckily I had everything backed up in my Time Capsule.  I just ordered my new Macbook Pro (13"), 16GB Ram, and a 240GB SSD.  I plan to install everything next week.  My plan is to keep all of my apps and working files on my SSD and use my 2nd hard drive for data storage and possibly my itunes library.  My question is- when setting all of this up, what would be the best way to go about doing this.
    1.) Restoring my time machine backup to the original hard drive, move it to the optical drive bay, and then copy over the files that I want on the SSD (after installing the operating system) and delete them off of the origan HD.
    2.) Restore my backup to the SSD (once it's installed) and then move files over to the formated original harddrive in the optical bay.  My problem is that there may not be enough room on the 240GB SSD.
    3.) Is there a way to do a slective restore through TM and move where I want to keep them?  I think this would be the easiest.
    4.) Other way that I haven't mentioned
    Thanks for any help with this question. 

    I used setup assistant last time when I changed from a 2009 mini to a 2010 mini. It caused some file permission errors that still persist today with iPhoto. I have 2 accounts on my mini, 1 for my wife and 1 for myself, but I store all our photos and videos on the shared folder in order to avoid duplication. But when she imports pictures from her profile and I try to view them full screen, I'm unable to. I have to relaunch iPhoto and repair file permissions if I want to view them properly. I was hoping to avoid this happening again.

  • New problem WITH the logic board replacement

    Hi Everyone,
    I sent my computer in recently to get a whirring fan noise repaired, but after receiving my macbook, I have developed the whine.
    They tell me they replaced the logic board, but I didn't even ask for one. Now I have a loud whine coming from the left side of my computer near the adaptor.
    I guess my question is, is it possible to develop the whine after the logic board has been replaced and why Apple replaced a logic board which had no whine.
    Thanks for the help.

    You will not be able to order a logic board from Apple.  You can look at websites such as iFixit.com and Powerbookmedic.com where Apple MBP parts are available.  Costs will be shown there.  In additions there are instructions available if you prepared to install it yourself.
    Ciao.

  • What is the little golden coloured metal tab that sticks out the side of the logic board?

    Hi,
    On the logic board of a 3g and 3gs (i am not sure about the other models) there is a golden coloured tab that sticks out and when the board is in the housing it makes contact with the chrome bezel.
    I was wondering what the job of this little part is and what the implications would be if it did not do its job properly.
    Thanks

    Just be sure no extra parts are left over when you re-assemble it..... as KT said this question goes way, way beyond any guidance than can  be offered at this location. 

  • I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) and now my microphone is not working

    I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) 3 days ago, I had a terrible experience as the genious who gave me my solid state disk for safekeeping lost my disk's brackets thus I had to wait 2 more hours until they find one after 10 days of waiting for the repair. I noticed some weird sounds, like somehting is moving with the mac 1-2 times, even if I have no mechanical parts other than the fans, but my real issue at the moment is that my microphone is not working. I can see the mic in the System Info however and in Audio Midi Setup. In the Audio Midi Setup I see that the master chanel is turned off and I can't turn in on. Ch 1 and 2 are on full. I also noticed the first seconds after the comp. boots the blue bar goes to the middle in the System Preferences -> Sound -> Input. Any ideas what to do or try? I do not want to go back to the apple store as it is 50 minutes away from here and I need my laptop as a computer science student. Everything else is working perfectly.

    You need to call both the store that did the repair and Apple directly, warranty service or Apple care, and report this problem with both of them and get a ticket number of some kind (some kind of verification number) that the unit just came back from major service with this problem and that you want it fixed when you can lose the use of it, which is not right now.
    Without doing something like that they could easily say it is damage not covered under the normal warranty.
    God knows what the repair center did and did not do to it while it was there.
    And depending on when you actually bought it the warranty could run out in the mean time.

  • My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

    My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

    Mj
    Do you mean a case for the external hard drive? See here. Hope this may be helpful to you.
    Regards,
    Joseph

  • The logic board of my macbkpro 10.6.8 (OS ML) has died. I want t migrate info to another McbkPro (OS Snow Leopard) but is asking me to update to same OS. Can I update the latter to Mavericks and migrate the info from Mountain lion? thanks

    Hi i took my macbook pro to an apple store because it would not start correctly. The veredict was that the logic board was dead. As this is a very expensive item to replace, I have decided I will buy a new one but I am currently overseas, and will wait a couple of months when I get back home. This is a macbookpro 15 inch early 2011, running on Mountain Lion OS. I have another macbook pro 13inch running on snow leopard. At the store we tried to migrate the info using an ethernet cable (using the "T" command on startup) but the system asked for an update of the OS. The guy at the store told me I had to update the OS so that the two macs would be on the same OS - mountain Lion. As the newest (and free) OS is Mavericks, I wonder wheather I coud update the 13 inch mac to mavericks and perform the migration. The guy at the store was explicit to say that if the OS were different it would not work. But reading on the apple website it seems that mavericks support this kind of migration altough is not explicit about it. Can you please help?
    thanks

    Hi BobRz,
    As this is a new issue for me, I believe I had the incorrect approach, maybe you can help me. What I want to do is recover a few files in my desktop, and some information i had on the iCal application and the Mail application as well.As I do not want to do a full migration into this computer (which is not mine) I believe that starting the damaged MBP in Target mode should allow me to search and cop the files I need. But:
    1. Can I open the Ical and mail apps to look for the info I need while reading it as an external HD  ?
    2. Do the target machine (my friends) still need to be updated to ML o Mavs so that it recognizes my MBP as an external drive if starting it in Target mode ? (no migration assistant)
    Thanks.

  • I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player.  I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time

    I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player.  I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time I try install the new player it is place in my Trash Folder and I can not get Player to work.  I did everything I was to install it correctly but it still does not install it correctly.  Can some help me.  Bob

    Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
    You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
    http://www.etresoft.com/etrecheck
    It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
    Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
    Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely

  • I've got a mac pro problem with the starting up, but also a red light on the logic board solidly on. Its not among the diagnostic led. It's located near the BT adapter and the front fans. Also the fans run loud also. any solutions?

    Hi
    I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on  the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
    Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
    thanks and hope for your best solutions
    Kari

    I can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.

  • The cable between the logic board and the 3G board  was removed can I convert it to a Wifi only?

    I have a Ipad 2 3g. someone detached the cable between the logic board and the 3G board can I convert it to a Wifi only?

    The ipads that have 3g have an extra section attached to the logic board by a glued on wire. I bought this at a tag sale. Someone was apparently trying to repair their iPad and they did not know that when you removed that glued strip attaching the 3g antenna to the logic board you would never be able to re-atach it again later. So basicaly my 3g logic board is now in two pieces. the main logic board with wifi and the cdma 3g antenna. Now their is no differnce between the logic boards in either wifi only or wifi and 3g devices. I attempted to restore the device with the ios for wifi only, because there are 3 different ios versions depending on if you have wifi only wifi 3g with SIM card, or wifi 3g cdma.

  • I havea 2007Mac Book Pro and a Genius told me that it is "vintage" and that the "logic board" is bad.  He removed the hard drive and told me to buy a "sled" to retreive the data.  Is it worth trying to fix it so that I don't have to buy a new one?

    I have a 2007 Mac Book Pro and a Genius told me that it is "vintage" and that the "logic board" is bad and no longer supported.  He removed the hard drive and told me to buy a "sled" to retreive the data.  Is it worth trying to fix it so that I don't have to buy a new one?  Where should I take it?  Thanks.

    djgornik,
    if the Genius is correct and the logic board is bad, then replacing the logic board would be fairly expensive. What problems are you seeing with your MacBook Pro that caused you to visit the Genius in the first place? Whether it’s worth trying to fix it or not depends on your particular circumstances, such as your willingness to trade time for money in pursuing repair vs. replacement.

  • Question about the logic board and video

    Hi, i own a macbook pro 17 in. @ 2.4 ghz, and have the nvida 8600 gt card. I'm pretty sure that the card has failed since no video has shown up during start up 2 weeks ago (i asked a friend of mine, and he had the same problem with a macbook pro 15 in., he was pretty positive on a card failure). I brought it to the local genius bar, and they fixed some firmware or whatnot, and it worked fine for a week. A week later, the same problem of no video showed up during start up.
    My question is if this is a video card issue, is it possible that the logic board could have been damaged from the faulty video card? The tech. told me that it might be the board, and im afraid of paying the hefty repair fee, although i personally feel that the card is all to blame.

    Here is the article on the NVIDIA 8600 chip:
    http://support.apple.com/kb/TS2377
    Note that Apple will do the repair free of charge if the chip fails within the first two years of ownership. The repair will be to replace the logic board, as Apple does not work on boards at the component level. Your machine should be new enough to qualify for the free repair.
    Good luck!

  • I have been trying to get my ibook g4 fixed from apple for 6 years now. my ram doesnt work and the logic board is f'd up aswell... i know 12 people that have had the same issue. 4 of them got there ibooks replaced. anyone know what to do?

    i have been trying to get my ibook g4 fixed from apple for 6 years now. my ram doesnt work and the logic board is f'd up aswell... i know 12 people that have had the same issue. 4 of them got there ibooks replaced. anyone know what to do? all 4 ibooks were replaced outside warranty, why wont apple help me...

    Apple supports most of their computer products for a 7 year period, could be that your IBook is well past any kind of help.Secondly parts are no longer being made for this machine and never will be again. Finally I find it hard to believe that nothing has been done with this for 6 years.Have you documented the reasons why you were turned down for repairs ? were the replaced Ibooks within a couple of months of warranty expiration? What model is your IBook ? At least if we knew what the model #, some of the more techy types could find out if there were any repair programs for your model.
    Seems odd that you'd hang on to a non-working IBook for that long.

  • I replaced the logic board and power supply in my iMac and it's still dead.

    Recently lighting hit my friend's house and his iMac was plugged into an outlet. It did frie the power supply. I replaced it and the logic board. The first two LEDS on the logic board light up green so I know it's getting power. However it still wont boot. A white light flashes in the bottom right corner and the fan kicks on and then off. I've tried reseting the PRAM and SMC and now it wont do anything at all?

    The strike could have written everything off in the computer or if the part still works it still could be damaged and cause hard to identify problems or fail within a short time.
    rkaufmans advice holds true, either take in it for service or probably write it off on the insurance. It is quite likely it is beyond economic repair.
    If the strike was close by, sometimes not too much gets damaged but a direct strike, the ones I have seen have wrote the machines off.
    Also do you know the provinence of the replacement parts, have you seen them working and know they are good and a direct replacement?

  • My 2011 MacBook Pro does not start and stop after the apple appear, they said that the problem is a video problem and need to change the logic board. Cost almost same to buy a new one. Somebody have the same problem?

    I have a MacBook Pro early 2011. Does not start. After the apple show, a blank screen appear. The service said that the problem is with the video plaquue in the logic board. Need to change. Cost lmmost the same than a new MacBook Pro. Somebody has the same problem? What we can do?

    I hate to break this to you, but life isn't fair. If your job is that critically in need of a computer, then you should have a spare to use for just this kind of situation or have your employer provide you with a computer to use.
    Computers break down, just like cars. If your car breaks down do you curse the car maker or get it fixed? Surely, you paid more for your car than the computer.
    This is reality. Best get used to it because it won't get any better.

Maybe you are looking for

  • How to make the default param work?

    Hi experts, When I define a default value for a parameter in a procedure or function, such as (p in     varchar2 default null), and when I call it without providing the parameter value, I am getting the "PLS-00306: wrong number or types of arguments

  • SharePoint Foundation 2010 supported sql server version?

    Hi, I am using SharePoint 2010 Foundation. I want to know what are all the SQL Server versions would support in SharePoint 2010 Foundation. Could anyone tell me as soon as possible. Thanks & Regards Poomani Sankaran

  • Updating iTunes display when switching CDs

    I'm in process of copying my CD collection into iTunes (7.02.16). iTunes reads the album/track/artist info from the first CD inserted, but I can't get it to read the next CD "info" without closing and restarting iTunes, what's up with that? It will p

  • 79 Service Error Message on the LaserJet Pro 200 color M251 Series printer

    I've been using this printer with the Mac OSX 10.9.4 OS for about 9 months. I'm now getting a 79 Service Error message. I've tried to turn the printer Off and On several times to no avail. Strangely enough, when I try to print a new document, a messa

  • I get this error message

    I get this error message when trying to itunes library file.itl file is locked on a locked disk and i'm the only user on my computer.