I receive efax's only on my computer. Do not print out when they come in.

In order for me to know I have an efax I need to open up the message center on my computer and locate any and all new faxes and print them from there. My printer is a HP Photosmart 7510 and my computer is running Vista-64. It is not a connection problem because my router is working just fine and the printer is connected wirelessly and works with no problem wirelessly when I give a print command.

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Similar Messages

HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

I keep getting an error message when I try to sync my new iPhone5s to iTunes. It says my computer is not authorised. When I authorise it and try and sync again, the same error message appears. help?

I keep getting an error message when I try to sync my new iPhone 5s to iTuines.
It says my computer is not authorised.
When I authorise it successfully, and try and sync again, the same error message appears.
Help?

Hello Chad176
If you are constantly Authorizing your Apple ID, the article below will assist with getting that resolved for you.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My iPhone won't sync to my iTunes because it says my computer is not authorized. When i do authorize it, it claims to already be authorized. When i re-sync my phone it says it is unauthorized. Any help?

my iPhone won't sync to my iTunes because it says my computer is not authorized. When i do authorize it, it claims to already be authorized. When i re-sync my phone it says it is unauthorized. Any help?

Hello katey1717
If you are getting the repeated prompts of asking to authorize your Apple ID, then check out the article below to resolve the issue. Make sure that you go through and remove the SC Info folder and try to authorizer again as that resolved it for me when I had that issue.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Regards,
-Norm G.

I have 4 devices on an iTunes whose computer hard drive is dead. How do I get my devices on a new iTunes on a different computer and not wipe out my contents?

I have 4 devices (iPhone 3GS, iPhone 4s, iPad2, Mini iPad) on an iTunes whose computer hard drive is dead. How do I get my devices on a new iTunes on a different computer and not wipe out my contents?

This should be of great help to you.
https://discussions.apple.com/docs/DOC-3991
Or this one.
https://discussions.apple.com/docs/DOC-3141

Canon pixma mx850 printer not reading my computer - will not print

canon pixma mx850 printer not reading my computer - will not print
I unplugged the cord that went from the printer to the computer to another canon printer to see if I could remediate a problem with a wireless printer.
When I plugged the computer cord back into the usual computer, the printer is no longer talking to the computer even though I have gone in and changed back the settings, and it has been the default printer - that was not changed.
I've tried all the trouble-shooting suggestions to no avail.

Hi scheideckerj,
Reinstalling the latest drivers for the printer from the Canon USA website may resolve the issue you are experiencing. Please click here to go to the Drivers and Software page for the PIXMA MX850. Once on the download page, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "DRIVERS" section and click on the MP DRIVERS file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file is downloaded, please double-click on it to reinstall the printer drivers on your computer.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Mac computer is not printing in color

My new Mac desktop computer is not printing in color. I have an HP C4795 which worked fine with my old PC, but now doesn't do color. I've tried all the selections, etc. I can find, but nothing works. The Mac people didn't know either. Help!

Hi @staffordgirl
Are you able to copy in color? I ask because I want to ensure the root cause is not the printer before I start suggesting steps to take on the Mac.
If the issue can copy in color, please complete the following steps and let me know the outcome of your efforts;
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

HT1351 Itunes says that 96 of my songs cannot be synced on my ipod since this computer is not authorized. When I authorize it I am told that I have 5 computers. I only have one. please help

When I sync my ipod with itunes i am told that 96 of my songs are not authorized on this computer. I follow the directions to authorize and the message answers that I have 5 computers and this is the only one authorized. I only have one computer. How do I get itunes to sync those 96 songs???

Hi eversonjm,
Thanks for using Apple Support Communities. If you are out of authorizations but only have 1 computer, deauthorizing all computers and reauthorizing your correct computer might be a good idea. See this article for instructions:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
If after deauthorizing and reauthorizing your computer, you are still not authorized for the 96 songs, this article has some steps for seeing the account name that was used to purchase a song, in the event that a different account may have been used:
Recovering a forgotten iTunes Store account name
http://support.apple.com/kb/ht1920
Cheers,
- Ari

Can not print. out of black only. case# [edited] I called HP 7/5/2015 never received email.

I received new printer (deskjet 2540) I returned my old printer replacing ink did not fix the old printer. I sent my old printer to HP plus unused ink (4) and empty ink cartages . As of 7/5/2015 I have no email from HP. I called to get this information. No ink. No email. No call. Printer will not print with color ink only. Case id # [Personal Information Removed]. Thank you "needink" [Personal Information Removed]

,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message after the weekend from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details)
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.

Can not print. out of black only. case# 3017074983 I called HP 7/5/2015 never received email.

I received new printer (deskjet 2540) I returned my old printer replacing ink did not fix the old printer. I sent my old printer to HP plus unused ink (4) and empty ink cartages . As of 7/5/2015 I have no email from HP. I called to get this information. No ink. No email. No call. Printer will not print with color ink only. Case id # 3017074983. Thank you "needink" [email protected]

,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message after the weekend from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details)
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.

When I try to sync my apps Itunes says my computer is not authorized. When I authorize it it then tells me my computer is already authorized. This only happens when I try to sync apps

When I try to sync my apps from my computer on to my iphone 4 Itunes says the computer is not authorized. I then authorize it and it tells me it is already authorized. I again try to sync the apps and it will once again tell me it is not authorized. I can sync music just not the apps

You are my hero thank you it worked!!!!!! I was afraid to deauthorize in case I lost everything but I figured I would follow your advice....Thank you so much

Screen/Computer does not Power Up when life the Display from being Closed

Sometimes (not always), when i come back to my MacBook Pro and open the display after it has been closed for a bit, the screen and computer does not power back up or anything. If you look at the screen there is a very FAINT image on the screen of whatever was open when the screen was closed, but you can't do anything, nothing is responsive, etc. I have to hold down the power button until it turns off, and then right before it turns off the screen will power up for one second and then shuts off. Any ideas?

I am having a similar issue when transitioning from my external display via the Mini Display to DVI adapter back to the internal LCD. The screen will go black, the machine will not sleep if I close the lid, and none of they key commands appear to work. The only response I can get is the caps lock key will turn off and on. When I restart the machine, I get no details on a Kernel Panic, or anything else, so wondering if it has something to do with the video drivers.

Computer does not start up when connected to My Book 4TB

When I connect MY Book (4TB) to my computer before turning it on, my computer does not start up. I only get a black screen. If I disconnect the My Book and then first start up my computer, I am able to plug in My Book and read all the files, backup, etc. Why won't the computer start when My Book is connected???

??? Wrong Forum? This is for "My Book Live" vs "My Book"... How to tell? Easy, MBL (NAS) does not have USB, MB (USB HD) does...

Computation points - need to understand when they trigger

Hi,
Can anyone please assist me in understanding computation points...
I've used (Before Header - on the first instance of the page) in the application... need to understand the others (such as After Header, Before Regions, After Regions, etc...) as when they trigger and some examples of application...
Thanks in advance

Hello,
>> …need to understand the others (such as After Header, Before Regions, After Regions, etc...) as when they trigger ….
Although the Computations you are talking about are part of the Page Rendering phase, it’s important to remember that they are actually triggered by the server – the APEX Engine – as part of generating the application page code. It means that these Computations are not triggered when the page actually runs on the client.
The Firing points are shared by both Computation and Processes, but are more relevant to the latter. They actually reference the different stages in generating the page code (and not necessarily the sequence of running it).
Computations allow you to set the value of page/application items. All of these are available to the APEX Engine prior to starting the rendering process, so in APEX terms they are already available in the Before Header stage, and for all the following stages. However, right now I can’t think of an example that force you to set a Computation firing point other than Before Header (as we are talking about the rendering phase, After Submit is excluded).
With Processes things might look differently, especially if we are using them to generate some dynamic code that depends on the values/existing of items or DOM elements. For example, if we want to add some JavaScript code that will close a (popup) window prior to its rendering, we should fire it before header. However, if we want to include a script that manipulates the region header title, it should be included before the APEX Engine code for that region, so we should choose a firing point of Before Region. Relying on the same logic, if we need to generate a script that uses DOM elements that are only created with the region, we must append it after the code for the regions, so we should choose the After Region (or later) firing point.
I hope this makes things a bit clearer for you.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

I receive efax's only on my computer. Do not print out when they come in.

Similar Messages

Maybe you are looking for