I received a new tablet at Christmas and I'm on Verizon 3G for roaming but I can't send emails out when roaming can someone help in my setup. My emails come in great.

I

What tablet? Are you using the native app on the device for email? Did you download a separate app for your email like Hotmail or Outlook or Yahoo?
Are you using a pop email account like Road Runner or verizon?
Need more information.
Good Luck

Similar Messages

  • I dropped my ipod touch in the street and there is a large crack in the screen can i take it to the apple store and pay to have it fixed there or do i have to send it out?

    i dropped my ipod touch in the street and there is a large crack in the screen can i take it to the apple store and pay to have it fixed there or do i have to send it out?

    They can fix it at the Apple Store. I wish you could get it fixed for free, but the warranty doesn't cover accidents like this . It sounds like you understand this, I just want to make sure you know.

  • Can't accept BBM invitations and Invites sent show as "Pending for Authorization" but recipients are not receiving them either (PIN Message Status : Service Blocked)

    I recenly changed device from BB Curve 8530 to BB Bold 9900 and ever since then can't accept BBM invitations and Invites sent shows only as "Pending for Authorization" but recipients are not receiving them either. Tried sending PIN messages  but  I got a red x next to the message and the status says: "Service Blocked" .
    When my phone got lost, I was lucky that I just synchronized my device to my BB Desktop. Not only was I able to retrieve my contacts (phonebooks and BBM) but also ALL txt msgs and even call logs
    Anway, that happening, I assumed I don't need to re-send all my BBM friends invites since some were able to communicate with me. But for those who have deleted my profile (knowing it got lost) and were still on my contact were the ones affected. I tried deleting them and sent an invite only to find out that: I can't accept BBM invitations and Invites sent shows as "Pending for Authorization" but recipients are not receiving any. (they also have the same pending for authorization notice on their end) 
    When I tried to send them a PIN message I get a red x next to the message nd get the service blocked message.
    Help I do not know what else to do.
    ** FYI: new contacts added with my new PIN have no prob sending invites and me accepting them all.

    Hello Lhea,
    This issue is most likely Caused by the BlackBerry not being provisioned for BlackBerry Data Services. 
    Please have a look at the following article that covers "Service Blocked" when sending a PIN message:
    http://btsc.webapps.blackberry.com/btsc/KB19244
    I hope this helps.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • I am new to mac's and have upgrade from Snow Leopard to Lion but......

    I am new to mac's and have upgrade from Snow Leopard to Lion but not all my application will work. Is it save to reinstall using original snow leopard dvd and does it wipe all my other application like apature? I am in a panic over this, any help!!
    I came across this online and i want to know is it safe to do this:
    Backup your User folders to an external drive. This should preserve your documents, photos, music, etc. If you store those things in locations not in the User folder, make sure to copy those over too.
    Insert the Snow Leopard disc. Restart your Mac and hold down C to boot to your DVD drive.
    Go to Utilities in the menu bar once the installer pops up and select “Disk Utility.”
    Find the drive in the sidebar where Lion is installed, select it and navigate to the Partition tab.
    Click on the drop down menu under Partition Layout and select “1 Partition.” Hit Apply.
    Now navigate to the Erase tab and make sure “Mac OS Extended (Journaled)” is selected, then hit Erase to delete all data on the drive.
    Quit Disk Utility to get back to the Snow Leopard installer and proceed with the install.
    Restore your User folder and documents from your backup.
    Run Software Update to get everything current, install your apps from your original install media and update those as well.
    if any one can help me that would be great, thanks Mike

    Before you do that why not do this first:
    Repair the Hard Drive and Permissions
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    To boot from the Recovery HD restart the computer. After the chime hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    If this doesn't help, then you can proceed to reinstall Snow Leopard as follows:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    This will erase the drive so be sure to backup your files before doing this.

  • I just got a new I Phone 4S and my volume is all the way up but the other person sounds far and i could bearly hear them. i checked all settings and they are all up as high as they can go

    I just got a new I Phone 4S and my volume is all the way up but the other person sounds far and i could bearly hear them. i checked all settings and they are all up as high as they can go. This is my first I Phone and don't know if this is normal for this phone

    Hi Flex,
    Congrats on the first iPhone.  This is not normal.  First check if moving the volume up or down either way has any impact on the sound.  Then see what happens while on speakerphone.  If you can hear ok on speakerphone, and there's no change from the regular earpiece with the volume changing, check with the carrier you received it from or the Apple store you purchased from.  They will have other things to look at for you.

  • TS2446 I got a new iPod touch 5 and because of security reasons they asked me my security questions that I forgot the answers to. Please help!

    I got a new iPod touch 5 and because of security reasons they asked me my security questions that I forgot the answers to. Please help! I made the answers a long time ago. Thank you!

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

  • I loaded music on my nano with my old laptop. now using a new laptop and want to load music on my nano but it wants to delete all song. How can I load new music frmo new laptop onto my nano and keep existing songs?

    I loaded music on my nano with my old laptop. now using a new laptop and want to load music on my nano but it wants to delete all song. How can I load new music frmo new laptop onto my nano and keep existing songs?

    Import the music on the external HD into iTunes.  If you don't want iTunes to make a new copy of each track that is stored in your iTunes Media folder on your PC's internal HD, make sure the Copy files to iTunes Media folder when adding to library option is NOT ticked from under the Advanced tab of iTunes Preferences.  Just remember that if you go this route, you'll always need to have your external HD plugged in before you start up iTunes.
    B-rock

  • HT1277 I can recieve emails but I can't send them out.  The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up?  What do I do?

    I have my Yahoo Mail "poped" over to Apple Mail.  I can recieve emails but I can't send them out.  The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up?  What do I do?

    Your outgoing mail server is different than your incoming server. Usually the outgoing mail server will have smtp in it. I noticed yours said "cannot send message using the server mail.wavecable.com". That sounds like an incoming mail server. Try setting your outgoing mail server to smtp.wavecable.com
    I hope that helps.

  • As of 1:00pm Thursday, 3/1/12, I am no longer receiving any email, nor can I send anything out from my account. I am OS4.1.1, hoping to upgrade next week to Leopard (because my mac is not Intel-based), but in the meantime, it's non-functional.

    Is anyone else having problems with the email? I am not receiving any emails, nor can I send anything out. Spent 30 minutes on online chat last night with someone most unhelpful, only to be told that the reason I'm not receiving anything is because my email is being forwarded to another address. I set my preferences to do that several years ago when this mac.com/me.com server began having so many issues, to ensure I was receiving email so I could check from my other address. The only comment I got was well, we no longer support 10.4.1 so there isn't anything we can do to help you. The status update says 33% of their customers are unable to migrate. So I'm pretty sure I'm not alone and that is a pretty large base of customers to no longer provide support to. Is anyone else who has not migrated to iCloud experiencing these email problems? Currently my iDisk works to transfer my larger files, but my email does not.

    Hello, here's the fix I think...
    I think they're slowly nudging people to switch, .mac & MobileMe are going away about July, may as well set it up now.
    I understand .mac mail will still come through.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    IMAP (Incoming Mail Server) information:
    • Server name: imap.mail.me.com
    • SSL Required: Yes
    • Port: 993
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password
    SMTP (outgoing mail server) information:
    • Server name: smtp.mail.me.com
    • SSL Required: Yes
    • Port: 587
    • SMTP Authentication Required: Yes
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password

  • I am trying to manage family sharing and I get a warning "invalid apple ID" that accounts can participate in one Family at a time.  How can I add my daughter when I can't even access my account?

    I am trying to manage family sharing and I get a warning "invalid apple ID"  accounts can participate in one Family at a time.  How can I add my daughter when I can't even access my account?

    Your best bet would be to try resetting the password to the account that you would like to use via iForgot
    Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
    After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account.

  • How do I get an iPad micro sim card for Austria and Italy?  We purchased one for Germany, but it doesn't cover in Austria or Italy

    How do I get an iPad micro sim card for Austria and Italy?  We purchased one for Germany, but it doesn't cover in Austria or Italy

    Compare the roaming charges from the German carrier with services like those:
    http://www.abroadband.com
    http://www.maxroam.com/Shop/Product/Detail.aspx?ProductId=787&cur=EUR
    Otherwise buy a pre-paid micro-SIM card for the iPad in each country you visit.

  • Set up apple Id with invalid email so can't validate new account. How can I edit account  info when I can't sign in for anything? Thx

    Set up apple Id with invalid email so can't validate new account. How can I edit account  info when I can't sign in for anything? Thx

    Hi Franklin777,
    If you are having issues with your Apple ID, this article will get you started.
    Frequently asked questions about Apple ID
    The first step is to find and edit the Apple ID you created:
    Apple ID: Finding your Apple ID
    If you need to reset your security questions this article will help ... 
    The rescue email address is a different address than the one you use for your Apple ID. 
    Rescue email address and how to reset Apple ID security questions
    You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
    Navigate to My Apple ID using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    Hope you get back on track soon!
    - Judy

  • I put ios7.1 to my ipad it was working not it is asking for activite for developer and allready registered to my developer for devices but now it does not actived

    I put ios7.1 to my ipad it was working not it is asking for activite for developer and allready registered to my developer for devices but now it does not actived

    If you are an authorized member of Apple's developer program, you have forums and resources through which you can address issues with seed versions of Apple's software. Posting here or in any public forum is a violation of your NDA with Apple. The developer forums can be found here:
    https://developer.apple.com/devforums/
    If you are not an authorized developer, then you have an illegal copy of the software.
    Either way, we cannot help you with questions about unreleased Apple software in these forums.
    Regards.

  • HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

  • My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for 10 secs. I just cannot work out what else to do?

    My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for >10 secs. I just cannot work out what else to do? I have turned router off and on. Amber light is flashing.

    The ethernet says self assigned IP 169.254.67.6
    Then the ethernet is not getting an IP from the TC.. there is no connection.
    I am not sure where you mean when you say the green LED should be on. Do you mean the TC?
    Thanks
    In order to help troubleshoot ethernet connections all routers use connectivity leds.. even APPLE.. it has one big LED on the front.. and 4 tiny leds beside each ethernet port. That light has to come on for ethernet to be active.. if you plug an ethernet cable into the port and the light doesn't come on.. then there is no connection.. either the other end isn't plugged in.. or the cable is bad.. or the ethernet port is bad.. something is wrong.
    To get access to the TC you need this led to be green.. is it?
    If it is green and the WAN is also green.. then I want you to unplug the WAN connection.. the blue wire in the picture.. the port slightly separated from the 3 LAN port.. computer plugged just into LAN port.. no airport turned on.. and press the reset again for 10sec until front led flashes rapidly.. then try and bring up the airport utility again.. assuming the ethernet led is green.
    How old and what model is the TC?
    The A number from the rubber mat will tell us the model.

Maybe you are looking for