I received this error today "unable to communicate with locator service to retrieve available files"

We use CSM to push out IPS updates and we recieved this error when we tried to manually retrieve the IPS update from Cisco.com. I wonder if the CCO server is having issues again because this happened last month when it rejected requests for updates. We did recieve the same error "Unable to communicate with locator service to retrieve files." at that time as well. Has anyone else experienced this problem?

This error is usually due to problems with the CCO server. Are you able to ping www.cisco.com from the CSM server? What ip address does ww.cisco.com resolve to? The problem could be a transient issue so do you get the same error if you try the IPS update again?

Similar Messages

Error 51 Unable to Communicate with VPN subsystem

I recently transferred my macbook pro to my wife. In doing this we used Target Disk mode to transfer the contents of her iBook G4 onto the macbook pro.
For work, she has a CISCO VPN. She was able to use it on her iBook. However, when I try to launch the application on the macbook pro, I get the following message:
VPN Client Message
Error 51 unable to communicate with VPN subsystem. Please make sure that you have at least one network interface that is currently active and has an IP address and start this application again.
After getting this message, a few times, I clicked on the get info, and noticed that the box for open with Rossetta was not checked. I checked it, but then when I went to launch it, nothing happened.
It still works on the iBook, but not the macbook pro.
Also, I have no problem with e-mail, accessing the internet or locating the macbook pro on my home's network.
I wonder if I have to delete the application and reinstall it rather than just having it transferred onto the computer via firewire in target disk mode.
Any thoughts would be greatly appreciated.
Russell

If your terminal reply looks like:
sudo: /System/Library/StartupItems/CiscoVPN/CiscoVPN: command not found
your only option is to re-install a new Cisco client.
A good link for downloads (w/o wading through the myriad of pages from Cisco before you find the download link is:
http://www.helpdesk.ugent.be/vpn/en/akkoord.php

VIPCA problem: PRKH-1010 : Unable to communicate with CRS services.

I have installed clusterware across 2 nodes recently in a virtual environment. I have been following a guide on how to do this and everything has gone as expected apart from when i try to run VIPCA manually (as detailed in the guide). When trying to run VIPCA on node 1 i get the following error:
C:\Documents and Settings\Administrator>cd c:\oracle\product\10.2.0\crs\bin
C:\oracle\product\10.2.0\crs\BIN>vipca.bat
PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:[21])]
PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:[21])]
PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:[21])]
C:\oracle\product\10.2.0\crs\BIN>
I was wondering if anyone had experienced the following error before and might be able to shed some light on why I am receiving it and how to resolve it to get VIPCA to run properly.
Cheers Edd
Message was edited by:
user601455

Followed a metalink note which told me to use opmd.exe to set all the services created by oracle to manual. this utility also created a new service - Oracle Process Manager, which i take it controls all the other services that clusterware uses.
This is working fine however the OracleCSService is unable to start, it simply hangs at 'starting' and doesnt do anything from there... this i think is the route of my VIPCA problems, so if anyone knows how to sort this out that would be great.

PRKH-1010 : Unable to communicate with CRS services

I am getting the following error message on rac1 and rac2 while manually invoking VIPCA to update the virtual ips for cluster nodes:
[root@rac2 bin]# ./vipca
PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:[21])]PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:[21])]PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:[21])]
Any help is much appreciated
Thanks
Yuvi

Hello,
Did you change the hostname after installation?
Thanks,
Sarab

./vipca Unable to communicate with CRS services.....

Hi,
crs version=10.2.0.1
OS version=Linux
I am getting following error when running .VIPCA
root$./vipca
PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:21])
PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:21])
PRKH-1010 : Unable to communicate with CRS services.
[OCR Error(Native: prsr_initCLSS:21])
Thanks,

Hi Mohammed,
Did you change hostname after install RAC?
Research:
page 5-9 of Oracle 10g RAC Administrator's Guide, Oracle specifically stated to not change the host name after the install.
The hostname becomes a part of CRS configuration, so changing the host name is not allowed.
To change hostname in RAC environment reinstall CRS...
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com

Recently downloaded latest version of iTunes software, afterwards, while trying to sync iphone with PC received this error message: Unable to Load Resource not found; SyncUICoreLocalized.dll; please advise, thank you

Recently upgraded PC with latest edition of iTunes (1/30/2014), afterwards, received this error message while attempting to sync iphone with PC: Unable to load, resource not found, SyncUICoreLocalized.dll

THIS HAS EVERY APPEARANCE OF A SOFTWARE GLITCH BY APPLE ... So first suggestion is NOT to begin reinstalling various software but to await some answer & fix from Apple. Too many have same problem on various systems, in my view (I am not an Apple rep but have certainly faced many glitches over the years).
PS - LOTS of Apple software problems these days, including many people having their Contacts shredded. What's going on with Apple?

Error 51: Unable to communicate with the VPN subsystem.

Hi Everyone,
I have a teacher that just bought a new Mac.
Mac OS X, V 10.6.7, Intel Core i5, Darwin 10.7.4, 64 bit
I have tried versions below with the same results.
vpnclient-darwin-4.9.01.0180-universal-k9.dmg
vpnclient-darwin-4.9.01.0280-universal-k9.dmg
The install seems to be ok, its when I start the program I get the error.
Hope somebody can help,
Thanks,
Rick Morgan

Please review
https://supportforums.cisco.com/docs/DOC-3613
Try using the Mac OS X Built in client.
-Craig

HP Officejet Pro 8600: "Unable to Communicate with Printer" error message

I receive the error message "Unable to Communicate with Printer" regularly when I print. Sometimes it will print 3 or 4 times just fine before I get this message. Sometimes it happens my first try at printing. I then have to reboot my computer to get it to work again. My OS is Windows 7 and my printer is an HP Officejet Pro 8600. My printer is wired to my computer. I have tried re-installing the printer software but this did not help. I've had this printer for only four months. Started happening after the second month. Any suggestions?

I finally solved it. Reflecting back on previous message boards I decided to try one last time. Some posters have found the problem in the Antivirus, Firewall protections. (By the way, I had even upgraded my router with no luck).I have Norton AntiVirus provided by the cable company.1. I turned off everything in the firewall. Although this left me vulnerable for a few mintues, I needed a fast test.2. It worked! I was able to print something immediately.3. I went back into the firewall, turned everything back on but turned off an individual switch within the firewall that said to "share the printer. "4. After turning it off, I was able to print and still have the most important parts of the firewall.This ultimately met my needs.Perhaps HP could:1. Do a better job at beta testing prior to release, including various brands of firewalls. Is there even a beta test process?2. Provide a better description of the error since all indicators within the drivers say the printer is connected. There should be a message indicating that it's connected but unable to print due to firewall protections.

HP Officejet 7500 E910 Network. When asked to print "Unable to Communicate with Printer"

My printer has been functioning well for some time. When my some installed a new wireless modum I would often receive the error message "Unable to Communicate with Printer" but it would blink a few times, then connect and print. As of three days ago I receive that message when trying to print from both of my laptops. I am wireless and have checked the wireless signal and it is strong, The wirless connect symbol is lit on the printer. I ran a wireless Network Test Report on the printer and the results indicated no problems.
The printer woks if I use it manually to print or scan. Neither printing nor scanning work when command is sent from my computer. The Wireless Network Test Report printed fine. Interesting though the Wireless Network test Report had the following date: Jan-00-00 00:00AM.

Hello @Dalead,
Welcome to the HP Forums!
I understand you're receiving a message stating "Unable to communicate" when printing a document using the Officejet 7500 E910. I will do my best to assist you! I would recommend following this entire HP document on Printer Does Not Maintain Wireless Connection.
Try assigning a static IP address and let me know if this resolves your issue or not. I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

Unable to Communicate With Printer error

I have an HP Office Pro 8600 Plus that is connected wirelessly. After I start the computer, I can print fine for a day, but when I try to print the next day, I get the error message 'Unable to Communicate With Printer'. I am running Windows XP 32 bit on a Dell computer. I have changed the settings on the network card to not power down and the computer to not shut off the disks to try to fix the problem, but the problem is still here. If I reboot, I can print again.
I run Norton antivirus.
I have another HP printer connected by a network cable and that printer works fine. I have a Canon MG printer connected wirelessly that experiences the same issue of unable to communicate.
I can ping both wireless devices (192.168.1.74 and 192.168.1.73) even though I cannot print to them.
Thanks,
Andrew

Try setting the printer to a static IP like 192.168.1.10. Change your routers wireless channel to a fixed channel like 1,6 or 11 not auto. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Problems printing - Unable to communicate with Printer

I just reinstalled my printer and it was working fine yesterday but now I can't print today as it's giving me the error message "Unable to communicate with printer". We did also change wireless companies but we set up the printer to it as well as my laptop. I printed out the Network Configuration Page to get the IP address but not sure how to change it. I need direction on where to go and how to do it and hopefully that will work. I saw in a post that I need to change your computer(s) printer driver configuration to match the printer's IP address, but I have no clue how. If that is correct please help and if not, please guide me on what to do. Thank you!

Hi @jilliantcre , and welcome to the HP Forums!
I see you're running into connectivity issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Unable To Communicate With Printer HP Officejet Pro 8600 (Network)

I recently purchased an HP Officejet Pro 8600. One morning a couple weeks ago I tried to print something and I received a prompt saying "Unable to Communicate with Printer (Network)". I turned off the printer and turned it back on which did not help, I then turned off my wireless network, turned it back on and still nothing. I finally figured out that I first have to turn off the printer, then turn off my wireless router wait thirty seconds, turn the router back on and the turn the printer back on. After these steps my printer was working. The next morning the same thing happened "Unable to Communicate with Printer (Network)" and I've been replaying Groundhog's Day ever since.
Please help!

Hello msheehy-
I would like to help you with this issue. It sounds like the router is changing the ip address of the printer. This could be caused by a couple reasons. (ip lease time, power loss to the router) I would recommend looking at the following link. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03781399&cc=us&dlc=en&lc=en&product=4323648&tmp...
I think if you would set a static ip address in the printer EWS you would better off. I hope this helps.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

CLI104 Unable to communicate with the administration server:

i am doing a glass fish clustering with load balancer plugins using SJWS7.0 as the loadbalancer.
i installed glassfish v2.1 and set up a cluster with a single node and single instance
and i did all the steps as per this document
https://glassfish.dev.java.net/javaee5/build/GlassFish_LB_Cluster.html
i did all the steps with out any errors.
but when i am trying to run the commad <websrvr_install_dir>/bin/wadm deploy-config --user=<websrvr_admin_user> <websrvr_instance_config>
i am getting following errors
CLI104 Unable to communicate with the administration server: Unable to connect t
o admin-server. Please check if the server is up and running and that the host
and port provided are correct.
i don't how to fix this error , i search a whole day for fixing this errors.now i am waiting for help .please help me to fix this one
Thanks and Regards

The glassfish document that you mentioned does not provide any instructions to start the web server's administration server.
Could you verify that the web server's administration server is indeed running? Do the following to start web server's administration server:
$ <websrvr_instance_dir>/admin-server/bin/startservAfter that step try out the deploy-config command as described in the document.
HTH.

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a H

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.

Nevermind I fixed it. Thank you.

HT203128 "Unable to check for available downloads. The network connection was lost." I have 3 downloads from yesterday that I receive this error code. Any ideas?

I have 3 downloads from yesterday that I receive this error code. Any ideas?
Thank you!

I may have stumbled upon something that could help. A type of "detour" around the problem.
I just started experiencing this problem a few days ago. Anytime I'd try to download a song/video/movie, I would get the message, "Unable to check for available downloads. The network connection was reset".
So, instead of selecting "Check for Available Downloads" under "Advanced" menu...
I logged into "My Account" page in itunes. If there are available downloads it comes up at the top of the page with the option button "Download Now". When I select that -- it downloads immediately.
Can't promise it will work every time. But it's worked for me so far. Good luck...

I received this error today "unable to communicate with locator service to retrieve available files"

Similar Messages

Maybe you are looking for