I recently bought full edition of Lightroom 5 for my Nikon D610 but when i connect my other camera, Nikon D3100 for editing my NEF files it says not supported files.What am i doing wrong?

I recently bought full edition of Lightroom 5 for my Nikon D610 but when i connect my other camera,Nikon D3100 for editing my NEF files it says not supported files.What am i doing wrong?
Thanks in advance

Often, this error message means that you have used some version of Nikon software to transfer the photos to your computer, and this has corrupted the files. There is a fix which uncorrupts the files at http://www.sno.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
But you said you get this message when you "connect my other camera Nikon D3100", the key word being "connect", and this doesn't really fit the description I just gave. This error message normally happens after you have transferred the photos to your computer via Nikon software, not when you connect it. So ... maybe you need to explain a little more ... what exact task (what menu options, what are you clicking on, what are you trying to do) when you get this error.

Similar Messages

  • I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?

    I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?

    The screen that says "Download Now" also shows the proposed iTunes version number (in the box below):
    Be sure it indicates 11.1.3.
    If it is, here's further troubleshooting:
    http://support.apple.com/kb/TS1538

  • After doing some editing in Lightroom I want to continue the edit in CS 5 but Lightroom is not exporting the edited version, this has not happened before, what am I doing wrong please? anybody

    After doing some editing in Lightroom I want to continue the edit in CS 5 but Lightroom is not exporting the edited version, this has not happened before, what am I doing wrong please? anybody

    You should be getting an error message that PS CS5 requires a higher version of ACR with two options "render using Lightroom" or "open anyway". You should choose the first option. If you are not seeing the error message then go to your Lightroom prefrences >General Tab> under Prompts> select "Reset all warning dialogs", then try the edit in function again. 

  • When i choose a picture in Lightroom 5, a popup says file not found.  What am i doing wrong?

    When I choose a picture in Lightroom 5, and click on Develop, it was file not found.  What am I doing wrong?

    It means the photo has been moved, renamed or deleted outside of Lightroom (Hint: don't do that)
    To fix the problem, either move the photo back to where it was (using your operating system), or re-connect in Lightroom following these instructions: Adobe Lightroom - Find moved or missing files and folders

  • Not quite sure what I'm doing wrong.

    As the topic states, not quite sure what I'm doing wrong here. I'm doing a problem for a class and maybe you guys could help me out, or point me in the right direction. The question states:
    "Write a program that reads in investment amount, annual interest rate, and number of years, and displays the future investment value using the following formula: "
    futureInvestmentValue = investmentAmount x (1 + monthlyInterestRate)numberOfYears*12
    (numberOfYears is to the power)
    import javax.swing.JOptionPane;
    public class Investment {
         public static void main(String[] args) {
                double investmentAmount;
                double interestRate;
                double investmentValue;
              int years;
              String stringInvestmentAmount = JOptionPane("Please Enter An Investment Amount");
                   investmentAmount = Double.parseDouble( stringIvestmentAmount );
              String stringIntrestRate = JOptionPane("Please Enter An Intrest Rate In Decimal Form");
                   intrestRate = Double.parseDouble( stringIntrestRate );
              String stringYears = JOptionPane("Please Enter A Number Of Years");
                   years = Int.parseInteger( stringYears );
              interestRate = 1 + interestRate / 12; //Monthly interest, I believe this is how you calculate it.
              investmentValue = investmentAmount * Math.pow(interestRate, years * 12); //Now the exponent should be the number of months.
              System.out.println("Your investment value is " + investmentValue + ".");
    }My Errors are:
    C:\Java\Investment.java:15: cannot find symbol
    symbol : method JOptionPane(java.lang.String)
    location: class Investment
    String stringInvestmentAmount = JOptionPane("Please Enter An Investment Amount");
    ^
    C:\Java\Investment.java:16: cannot find symbol
    symbol : variable stringIvestmentAmount
    location: class Investment
         investmentAmount = Double.parseDouble( stringIvestmentAmount );
         ^
    C:\Java\Investment.java:18: cannot find symbol
    symbol : method JOptionPane(java.lang.String)
    location: class Investment
    String stringIntrestRate = JOptionPane("Please Enter An Intrest Rate In Decimal Form");
    ^
    C:\Java\Investment.java:19: cannot find symbol
    symbol : variable intrestRate
    location: class Investment
         intrestRate = Double.parseDouble( stringIntrestRate );
         ^
    C:\Java\Investment.java:21: cannot find symbol
    symbol : method JOptionPane(java.lang.String)
    location: class Investment
    String stringYears = JOptionPane("Please Enter A Number Of Years");
    ^
    C:\Java\Investment.java:22: cannot find symbol
    symbol : variable Int
    location: class Investment
         years = Int.parseInteger( stringYears );
         ^
    6 errors
    Tool completed with exit code 1
    Edited by: Close on Oct 23, 2007 4:12 PM

    String stringInvestmentAmount = JOptionPane("Please Enter An Investment Amount");What is this line trying to do? If you are trying to create a JOptionPane object and pass that String to the constructor then you need the new keyword. If you are trying to call a method of the JOptionPane class then it would be a good idea to include the method name. I sure you are trrying to do the second option.
    Once you fix that, it is likely the other errors will disappear. Or different ones will emerge.

  • After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong?

    After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong? I've installed it and uninstalled it several times already, but each time I get that error message...

    I've been getting timed out for 2 days now, what finally worked for me was not plugging the phone into the computer and just doing the update through my wifi, worked perfectly, took less than 15 minutes

  • Keyer edge tool does not work. What am I doing wrong?

    When I am trying to soften the edge on my green screened image I try to use what they call the edge tool.
    But it does nothing to the edge of the image, it makes the entire keyed image more transparent or more opaque...  this is totally useless... I thought I remembered this working in a previous version but maybe not...
    what am I doing wrong? Or is it just not working correctly.
    Thanks for any help.
    FCPX 10.0.5  OSX 10.6.8

    Do you see the Multifox item to open a new window in the File of Firefox menu?
    You will see a "New Identity Profile" (Ctrl+Alt+M) in the "Firefox > New Tab" menu and in the File menu (press F 10 if the menu bar is hidden) and in the context menu if you right-click a link.<br />
    Choosing that menu entry will open a new window with a new set of cookies marked multifox-profile-2 in the cookie manager.
    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
    If this hasn't helped then also try to delete the addons.sqlite file.

  • I have set up a 'group' in my contacts.  When I go to send an email to this 'group', I get an error message saying 'Invalid Address'. What am I doing wrong?

    I have set up a 'group' in my contacts.  When I go to send an email to this 'group', I get an error message saying 'Invalid Address'. What am I doing wrong?

    I have this problem too. I've always sent messages successfully via bcc to a group using a group email list in contacts. Now ... all of a sudden when I select the same group for bcc nothing happens! Cannot email my group now. Why not?

  • Recently bought pro retina 15" with a super drive. But when I played a dvd the quality wasn't very good, any suggestions?

    Recently bought pro retina 15" with a super drive. But when I played a dvd the quality wasn't very good, any suggestions?

    There is a good chance that the DVD is OK and the machine is OK since a DVD's resolution is set for a television and not for a computer with a resolution 4 times that of the tele (at least).
    What are you using to play DVD?
    What is the DVD and what does it say on the cover about resolution or aspect ratio?
    Just because you have a retina Mac doesn't mean you will get an excellent picture from low resolution media, if you are using DVD player use the menu option for 'Actual Size' this will play it at the resolution for the DVD, any larger then it will start to pixelate.

  • Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

    Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

    I've been struggling with a similar issue myself and just figured it out.  Some of my content had been purchased with an older Apple ID that I don't use any more.  When I authorized my second computer, I only authorized it for my new Apple ID, not my old one.  When I tried to copy my library to the new computer, many songs, apps, etc. reported the error "could not be copied because this computer is not authorized".  It drove me crazy because I knew the computer was authorized and much of my library came over just fine.
    Finally I selected some of the problem items, selected "Get Info" from the menus, and saw that they were all purchased by my old Apple ID.  I then authorized my old Apple ID on my new computer, and all of my files are copying correctly now.
    Would be great if the message said something like "...because this computer is not authorized for Apple ID [email protected]"

  • I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

    I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

    Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • Error message occurs after downloading. it says invalid drive:e:/ what am I doing wrong?

    Error message occurs when trying to download itunes. It says invalid driver: e:/. What am I doing wrong?

    Hi there,
    You may find the article below helpful.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W.

  • When I convert my PDF file to either Word or Excel, the result is garbage and not usable.  What am I doing wrong?

    I have converted two PDF files to both Word and Excel.  The result is garbage and unreadable.  I want to edit the content of the PDF file and thought that this was the solution.  What am I doing wrong?

    It's probably not something wrong you're doing, just the way the file was
    created. You can look under File - Properties - Description and see what
    application and PDF producer were used to generate it. My guess is it was
    not produced using Adobe software.
    At any rate, there's no a lot you can do about it, I'm afraid. You can try
    re-frying it, ie sending it to the PDF Printer to produce a new copy, and
    then exporting that to Word/Excel, but that's about it.

  • The attached VI works when I run it initially creating the XML file, but when run after the XML file is created, it's not updated. What am I doing wrong?

    The attached VI works when I run it initially creating the XML file, but when I change data and run after the XML file is created, it's not updated with new data. What am I doing wrong?
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    Attractive Force XML.vi ‏23 KB

    That looks like the logic which was written into the VI
    Inner true/ false case:
    (file exists : false) write to XML file, unflatten for display
    (file exists : true) read from XML file, unflatten for display
    At no time when the file exists (true case) is the XML file updated...

  • WRT54G does not work or what am I doing wrong?

    My setup: DSL -> 2wire modem router (bridge mode, firewall shutdown) ->WRT54G -> LAN with 1 IPPBX, 1 wired PC and 3 wireless PC.
    VoIP is running fine within our LAN, we have 2 SIP trunks running fine, But we just cant make an external softphone to work properly from WAN (outside the LAN).
    As long as I know, the simplest way to explain what a firewall does is 'everything requested from the inside should be wellcomed, anything unsolicited from the outside should be disallowed UNLESS explicitly told otherwise' this is, why the heck do we have unreachable ports althought we have allow those to receive extern traffic?
    Please check the pdf´s (snapshots) here:
    http://travelexpress.com.mx/download/router/status.pdf
    http://travelexpress.com.mx/download/router/router_firewall.pdf
    http://travelexpress.com.mx/download/router/router_forward.pdf
    http://travelexpress.com.mx/download/router/scanner.pdf
    http://travelexpress.com.mx/download/router/scanner1.pdf
    All those are for showing current setup, firewall, port forwarding and the results of a port scanner wich shows that efectively, we cannot use our extern SIP client because the WRT54G is blocking it...
    Thanks in advance as we are urged to fix this ASAP

    Yes. NAT is a function in the router. Just like the firewall. But still, both are different functions of the router. The firewall filters traffic to the router. NAT is responsible for mapping IP addresses. The reason why unsolicited packets from the internet won't get into the LAN is because NAT cannot deliver those packets and not the firewall rejecting some incoming connection. NAT does not filter. NAT tries to deliver and if it does not know where it drops it. But not because it wants to filter something.
    The settings on the router are correct. But as I have mentioned before, forwarding a port does not mean it's open or accessible. There are still other factors which could cause the port to be closed...
    Regarding the modem: you can check that if you connect a computer directly to the modem, open a port on the computer and then do the internet port scan again.
    I also explained how to check with telnet if TCP port 5060 on the IPPBX is really open or not. Why don't you just do this test? It would be much easier and faster, giving relevant answers. I don't mind whether asterisk usually uses both protocols on 5060 or not. Maybe it does. Maybe not. Maybe it can be configured. Whatever. Enter "telnet 192.168.1.69 5060" into a command prompt window of a computer connected to your LAN and you see if the port is open or not. Then we know something for sure instead of thinking about what should be or should not be...
    Also do the same telnet test with port 23 and 80 and then use the internet port scanner to scan for tcp port 23 and tcp port 80. Then we could see if anything goes through or not instead of discussing theory...
    I did not say you have to set up a lab setup. I only explained that you were mixing NAT functions and firewall functions of the router. The NAT function may look like some firewall in certain respects but it is still a different function with a completely different purpose.
    I also can't say if the IP settings are all correct. Maybe the IP address is correct but the gateway address is not. Or the DNS server.
    The subject of this thread is "... or what am I doing wrong?". It's impossible to comment on something if you don't give the details which would allow to verify that you have set it up indeed correct...

Maybe you are looking for