I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?
I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?
Did you follow the instructions on the page linked below?
OS X Yosemite: Recover your entire system
Similar Messages
-
My start up disk is full, and now my MacBook pro won't do anything. What do I do now?
I Am trying to move photos to my external but finder won't even open.
You have a corrupted directory which is not recoverable. You will need to erase the drive and reinstall OS X.
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. From here you can re-download and install Lion from your Purchases page on the App Store. -
i am having diffiulty redeeming my previously purchased movie on itune.
i have redeemed all my purchased songs on itunes but i do not know how to redeem my movies
please thank youDownloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies. Movies available in the United States only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
-
HT4718 I recently upgrade my OS and now my MacBook Pro will not boot up
I recently upgrade my OS and now my MacBook Pro will not boot up
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Installed Yosemite...now my MacBook pro won't start up. Keep showing "Kernel Panic!" HELP!
installed Yosemite and now my MacBook pro won't start up. Keeps showing "kernel panic"
PLEASE HELP ME!If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report. -
How do I gift a playlist made of half my own songs and half chosen songs to be purchased? I have tried to find the 'arrow to the right' of the playlist when I select it but cannot see this at all! Can anyone help?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards. -
I am trying to edit a project originally started on another computer, by someone else and saved onto an external h-drive, but keep getting 'general error 48' when I try to render it to work further. Can anyone help?
Is this problem only occurring with the project you copied from an external drive, or with any FCP project?
For example, if you were to create a new project, do you still have this problem?
In FCP, if you go to the menu FInal Cut Pro > System Settings and look at the Scratch Disks Tab, is it set where you expect it to be? Have you tried switching the scratch disk to a different disk?
MtD -
I press the on button and the white light wont turn on, I don´t hear and fan noise, or the beeping sound. This Mac is 1 1/2 months old. Can anyone help.
You are under warranty. You can call Applecare and get advice from the tech rep, or you can bring it to an Apple store or authorized Apple service provider.
-
I am having problems accessing my airport utilities, the area which allows me to alter settings is all greyed out. Can anyone help?
Using the same Ethernet cable that is used to connect the modem to the AirPort Extreme, disconnect the Ethernet cable from the AirPort Extreme and connect it directly to your Mac as a test for 4-6 hours.
Be sure to power off the modem for 5-10 minutes when you do this, so that it will associate with the new device that it "sees".
Does the connection drop when you connect this way? If yes, then replace the Ethernet cable and run the test again for 4-6 hours.
If the connection still drops, you likely have a defective modem or a line problem on the cable service....despite what the cable company might say.
If the connection remains solid when you run the "test", then you know that the modem and Ethernet cable are working correctly.
If you have performed a factory default reset on the AirPort Extreme a few times, and connection still drops, then you should take the AirPort to an Apple Store....if you have one near you..... to let them take a look, or contact Apple Support directly.
http://www.apple.com/support/contact/ -
I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?
I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
Cheers
Guy -
I want to change my primary e-mail address that I use with Apple ID - help guide says Select Edit next to “Apple ID and Primary Email Address.” But there is no 'edit' on that section there is on every other but not that one. Can anyone help?
You can create an alias @icloud.com email address within your current account that will receive email in your current iCloud inbox (see http://help.apple.com/icloud/#/mm6b1a490a). (@me.com addresses are no longer available as new addresses.) Just be aware that you cannot use an alias address later to create a new iCloud account or move it to a different account.
Also, even if you created a new iCloud account with a new ID, your existing purchases would not be lost. They are permanently tied to the original ID you used to purchase them. You can also continue to use the existing ID for the iTunes store; it does not need to be the same as the ID you use for iCloud. -
Hey, I need to download the OS onto my iPhone 3GS, however, when I plug my phoneinto itunes it does not give me the option to do so, I am currently running 4.2.1. Can anyone help me?
irapidslammz wrote:
I can not sync it because when I plug it in it says that the apple mobile service has not been started.
Type " apple mobile device service" into the search bar at the top of this page by Support and read the resulting help article. -
AirPort can"t be installed on this disk. The version of Mac OS X on this volume is not supported. Can anyone help me out?
Can you clarify what exactly you are trying to do that generates this message?
IF....you might be trying to install AirPort Utility on your Mac....you already have the most recent version on your Mac.....and you cannot install an earlier version than you already have.
Check Finder > Applications > Utilities > AirPort Utility -
i have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz
Sounds like you broke it.
-
I cannot connect to itunes store but my network connections are fine and I have tried everything on the itunes support site. I just want to authorize my computer. Can anyone help?
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US
Maybe you are looking for
-
Preview file version can't be deleted
I have a MacBook with Lion 10.7.2 build 11C74 and I used Preview v 5.5.1 (719.11) to edit a pdf of a form downloaded from the internet. The file was moved to my Desktop, opened and edited. I saved a version of the file and another file appeared on my
-
Cannot boot into Recovery Mode but need to reinstall OS X, any suggestions?
My Mac boot is stuck at the Apple logo with a progress bar, and even when booting Recovery Mode (Command+R) it is stuck. Hence I don't think I can use Internet Recovery to reinstall OS X. Do you guys have any suggestions as to what to do? Thanks!
-
How to prevent Pivot Table Data Source from being changed automatically?
I have an excel file that contains a Pivot Table that references a table within the workbook (Data Source = "MyTable"). When I save the file and copy it, the copy contains a reference to the original file. Instead of displaying, "MyTable", it shows
-
Email signature editing almost impossible on iOS5 iPhone4
Anyone else having issues trying to edit signatures on an iPhone 4 in the mail settings? When I try, I can only see a one-line window at the top of the screen, that is almost too close to the top to do any editing. Any suggested resolutions to the is
-
when using the preset patterns in cs4 how can i change the colors??