I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. An

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. Any help out there?

Hi
Sounds like you may have moved the RMX library folder?
Is RMX fully updated (for Lion)?
Check your hard drives for a file called SAGE:
It (or an alias of it) is normally found in the <USER>:Library:Application Support:Spectrasonics.
Note that on Lion, the <User> Library is 'hidden'... quickest way to get there is to hold down Option (Alt) whilst using the Finder:Go menu
CCT

Similar Messages

I updated iTunes today (Windows). When I tried to launch, I get the message, ""The procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFoundationCF.dll".

I updated iTunes today (Windows). I restarted the computer but when I tried to launch, I get the message, ""The procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFoundationCF.dll".
I then did a new install of the latest iTunes version and got the same problem. No more iTunes.
HELP!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Am getting error message missing MSVCR80.dll and itunes will not run

am getting error message missing MSVCR80.dll itunes will not run

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

I keep on getting the message "missing .dll file" when I try to install Itunes on Windows 7 what is wrong ?

I am using Windows 7 (64) and keep on getting the message of "missing .dll files" after I attempt to install the latest version of ITunes. I attempted to install an earlier version and had the same results. I have uninstalled and reinstalled ITunes to no avail. I have queried this message on Google and found little to go by.
Can anyone help from here ?

This has just happened to me - again. Can't think what caused it. I uninstalled Quicktime a little while ago, maybe connected? I don't know. Uninstalling iTunes, or repairing, or a fresh iTunes install does not help
Even if you keep downloading and putting the dll files it keeps asking for in the sysWOW64 and/or System 32 folder, Apple Mobile Device Support will not not 'start' from Services.
Anyway, as well as itunes, you need to also un-install Apple Software Update, Apple Mobile Device Support, and Bonjour, then reinstall the latest iTunes to get it all working again

My iCloud email does not work. Getting error message that i need to uncheck SSL . This does not work. Help

icloud Email does not work. When running Connection doctor it indicates I must check or uncheck SSL. This has not fixed the problem

iCloud email addresses (@mac.com, @me.com and @icloud.com) require SSL. Is your address an iCloud address or someone else?

Home Sharing will not work. Firewalls are down, sharing is on, connections to the same iTunes library are on, everything has been restarted about a dozen times.....arrrrghhh, help please

home sharing will not work from my mac to iPhone or iPad. it works to my apple tv, but thats it. i've tried everything and wasted hours, can anyone give me a genius solution please?

Have you followed ALL the steps here? http://support.apple.com/kb/ts2972

BBM Not Working, Just getting a message

When I select bbm to send a message this message comes up and I am not sure what it means, I am not able to chat with friends thru bbm and would love to get it fixed.
Here is the message uncaught exception:Java.lang.NullPointer Exception
Any ideas would be greatly appreciated,
Thanks

Hello !
Would request you to pull out the battery and re insert it for Power Restart of your BlackBerry Smartphone.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest there time on this Message anymore.
Thanks.

Doing clean install but logic studio does not work. Getting Error message

I have my box Logic Studio 9 upgrade but it will not install on my SSD. Final cut and all other reinstalls worked. Cannot install LP 7 because it is a PPC
written program. Im trying to do a clean install of the lion OS but cannot get my most inportant program to install. I dont want to buy the program again at the app store. What do think my options are? I've had Logic since 6.0

Hi
First, get rid of your designer, the page design/code is a mess.
There are a number of problems with the page, not least being the disabling of the back button in all browsers I tested it in, (visitors may visit once with this, but are unlikely to do so a 2nd time).
The menu system is a fixed size so that when the browser is resized it overflows the browser window.
The use of tables for layout is not recommended as it is inaccessible to users using assistive devices.
To put this more politely, if you paid for this, ask for your money back. If you did not pay, then start again and use one of the dreamweaver layouts for your page, for more info, see - http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html.
PZ

Itunes will NOT download. i get a message that says ; this installation package could not be opened. verify that the package exists and that you can access it,or contact the application vendor to verify that this is a valid windows installer package.

pleasee help i need music on my iphone

Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

ADOBE READER 8.1 WILL NOT WORK-KEEP GETTING ERROR MESSAGE 1606: COULD NOT ACCESS NETWORK LOCATION %APPDATA%

Have tried to uninstall the Adobe Program but it will not let me. I keep getting the 1606 error message. I have went to the Microsoft Help site and it says that the registry may need to be modified. They also advised you that if you do not modify it correctly you may have very serious problems.

Please see this Microsoft KB article http://support.microsoft.com/kb/886549/
Some registry entry may have been corrupted, and it needs to be fixed. If you don't know how to edit the registry, do you have somebody who is confident enough to edit the Windows registry?
Anyway, for now I just want you to check something in the registry - don't modify anything yet!
Click Start | Run | type regedit [Enter]
Once the Registry Editor is open, drill down to the following subkey
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
In here you should see multiple entries, one being AppData - what is the data value on the right side? It should be %USERPROFILE%\Application Data.
Please close the registry editor now, and report back what you found.

ITunes does not start. Get a message "The procedure entry point CMBlockBufferCopyDateBytes could not be located in the dynamic link library CoreMedia.dll.

What do I do to correct this situation?

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

IPhone not working, I get this message

The iPhone could not be restored , an unknown error (3014) occurred .
I took the phone to an apple store and they reset it/erased everything .... Still didn't work. Someone please help.

If it still doesn't work take it back and ask for a replacementor buy a new phone.

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to fix The SIM card inserted in this iPhone does not appear to be supported. The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation

The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

Or if you've recently got the phone unlocked then you'll need to connect it to itunes and then do a fresh restore to unlock it ,although for most users simply connecting to itunes for few seconds did the trick.

Can GarageBand 6.0.5 be installed on a computer which has GarageBand 5.1 without having to trash 5.1 and all associated folders. Meaning, will 6.0.5 write over 5.1 and replace it

Can GarageBand 6.0.5 be installed on a computer which has GarageBand 5.1 without having to trash 5.1 and all associated folders. Meaning, will 6.0.5 write over 5.1 and replace it

1212 Music wrote:
will 6.0.5 write over 5.1 and replace it
if you do nothing but install it, yes.
what you can do is control click on the application and chose the "Duplicate" option. this will create a renamed copy of GBv5, and when GBv6 replaces the original GBv5, you'll still have the renamed copy available in your Applications Folder to launch (i currently have back to version 4 available on this machine... back to 3 on another).
for v6 and lower, the instruments will stay the same (GBv10 is vastly different and does replace instruments)
SOP: if you don't have a full backup of your system, you'll lose everything at some point. as long as you do, you can at least recover from any failure such as installing new software

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. An

Similar Messages

Maybe you are looking for