I recently updated my iTouch 4th gen to iOS5 and it worked great, but now, my pictures have all gone blurry. Even ones I had just taken are now blurry. Help!
I really need help with this S:
*wish I could edit a post*
Well here is another update. I just bought an album on iTunes last week (Epica - The Divine Conspiracy). I opened iTunes up on my phone and went to purchases and clicked the little iCloud imnage next to the first song, it downloaded fine. I went to iTunes and tried to sync the SAME EXACT album and got error -54 again. So this tells me that it has something to do with communication between iTunes and my iTouch during a sync.
There is no way to download all at once from your purchases on the itunes app on my ipod and most of my music is from CDs I own so it doesnt really help me in the long run, just proves my ipod is still capable of holding songs and playing them.
Also, I saw a lot of error codes are generated by itunes being blocked by the firewall and I know this isn't the case since it is allowed in my settings and I even went as far as disabling my firewall during my last sync attempt
Similar Messages
-
I updated my itouch 4th gen to ios5.
now it cant sync to itunes, only the connect to itunes appear on my itouch. help
Updating to iOS 5 http://support.apple.com/kb/HT4972
Unable to Update or Restore > http://support.apple.com/kb/HT1808 -
Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!
Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Vista instructions in the following document: Check your hard disk for errors
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
How to update my itouch 4th gen?
Hi. Can you help me how to update my itouch 4th gen?
It can't be updated past 6.1.6; iOS 7 requires at least 512MB of RAM.
(107567) -
Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ???? AT&T my DSL carrier suggests I get a new router. Apparently the one I have is really old and doesn't support my Macbook Pro. Does this sound right?
If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
One for entering into devices, computers etc for Internet Access Only.
You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
Also if you give out the password to another, they can't hack the network with the guest access password.
Computers remember the internet password, so anyone with access to your machines or network will have the password.
Since you have another Admin only password, they can't hack in. got it?
You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
Good luck. -
Updated my itouch 4th gen. 8gb yesterday
Now I cannot download any apps! Message when trying to download says "app not compatible with this iTouch". All these apps were on the iTouch before I updated it!
Thank you!You have a 2G iPod. Those can only go to iOS 4.2.1
Many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.
Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews -
My iPod touch is freezing up alot . Because one of my parents shutdown my computer accidentally during it's ios5 update. How can I fix this and make it go back to normal?
Try the standard fixes one at a time:
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup via iTunes
- Restore to factory defaults/new iPod.
If you stiull have a problem then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I'm having trouble with my itouch. It keeps on saying that my connection has timed out. I really dont know what to do. Please help. D:
Try disabling yur computer's security software (antivirus, firewall etc.).
-
I no longer have access to my other music. My computer crashed a month ago, and I did not have my newest music files backed-up anywhere else. I really don't want to lose that music.
I upgraded to version 5 on my IPad Wifi64 and now I can't find my music or podcasts, etc. I don't want or need to upload everything to a cloud. Does anyone know how I get to my music and stuff?
Oh...I can see the music when I connect to my computer. I'm hoping that Apple isn't acting like Microsoft and eliminating features to push people towards something they want...like access to your information...or for you to only have things you buy from them. Hopefully I'm over thinking it and there is simple answer...anyone know the answer? -
having had trouble updating to iOS6 Beta 4 i lost a load of photos off my iphones photostream, now they are still in my ipads photostream but i cant figure out how to recover them onto my iPhone. Any help would be fantastic guys and gals
ipadal wrote:
im not disclosing anything
Yes you are
just want some help
You're not going to get any -
My samrt case is unglued within 5 months waht should i do?
Take it back. If you b ought it directly from Apple, take it into your local apple store and see if they will stand behind it and replace it.
-
I'm trying to update my phone to the ios7 and my phone keeps telling me I don't have enough available storage... The thing is I have deleted everything from my phone and I have nothing else to get rid of... So I need to know what to do
Check for 'others' in iTunes against your iPhone.
Restore from a previous backup to reclaim some of it.
Still want more, Restore in iTunes, setup as New. -
Windows 7 ultimate, this program worked fine for the last 5 months and all of a sudden just quit. I erased and put on earlier versions all have same outcome. Click on icon and just looks like time clock just spins. No program opens but says program is open.
hello, could you attribute it to any change / update that was applied? some security software like zonealarm could create problems after a firefox update when sandboxing is enabled, see [[Firefox won't start - find solutions]]
also in some cases this behaviour can be caused by malware, so please do a full scan of your system with the security software already in place and possibly with a different tool too.
[[Troubleshoot Firefox issues caused by malware]] -
my itouch 4th gen refuses to switch off and i am unable to change the volume. Can you help?
- Have you tried resetting the iPOd:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next connec the iPod to its syncing computer and try to restore the iPod.
- The if still same. place the iPod in recovery mode and then try to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx
- Reboot the computer
- Try DFU mode and then restore/update
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Delete the update file so that new one has to be download.
IPSW file location for Mac and Windows
- Try on another computer to help determine if you have an iPod or computer problem.
Maybe you are looking for
-
Accessing a page in a tiled Tiff image file
hi all I have a tiled tiff image file containing 10 images,please tell me how to process a specific image say 7th image using ordImage process method ,I am using oracle 8.1.7 and win 2000. regards Ravi Kiran
-
My sony DCR-SR68 will not connect, stuck on "preparing"
I have tried to connect my sony DCR-SR68 via USB cable, the camera displays proper screen (to choose USB connection for the internal HD), I choose the USB connect, then the screen stays stuck on "preparing." It's supposed to be communicating with the
-
JHS 10.1.3.1.26 - Using create mode as Default page
Hi , I want to use create mode as default (while entering some page , user can insert new data immediately), any suggestions ? At present , I use javascript to call create button while page has been load. I think there must be some better way to do t
-
What is my Skype password and ID?
I downloaded the Skype app and it asked for user ID and password. Where do I get that?
-
Timestamp in Messenger Express Received Column
Hi, Does anyone know how to change the date/timestamp in the message list in the Messenger Express Received column from 24 hour format to 12 hour format? So instead of "16:23" , it would say "4:33 pm"... Many thanks...