I recently updated my new iphone 4 from ios6 to ios7. All of a sudden, my screen crashed and is now in a flashing white state with lines. I've reset the settings multiple times and the flickering has not disappeared. Please help

I recently updated my new iphone 4 from ios6 to the current ios7. It has been in use for a few days now and all of a sudden the screen crashed to a white display with lines. I have reset it a couple times but there has been no improvement in reducing the screen flicker. Please help

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...

Similar Messages

My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Once I downloaded the new IOS 5.0 I've lost all of my photos that were stored on my PC, and I no longer have access to them on the IPOD. Cannot figure out what has happened. Please help.

Once I downloaded the new IOS 5.0 I've lost all of my photos that were stored on my PC, and I no longer have access to them on the IPOD. Cannot figure out what has happened. Please help.

Thanks lllaass, but I am not computer literate and do not understand exactly what it is I am supposed to do. All of my photos were stored on Microsoft Windows Live Photo Gallery. When I now access the gallery the only thing that is there are the folders with the title of the folders. The pictures that were in those folders are now gone. I can no longer access them on my IPOD either. My photo library on my IPOD is now empty.
Thanks again for your help.

HT5655 I have downloaded the latest flash for my mac (running mountain lion 10.8.2) multiple times and have uninstalled it multiple times, but it still says blocked plug in. Im using firefox but i need safari back. any help?

I have downloaded the latest flash for my mac (running mountain lion 10.8.2) multiple times and have uninstalled it multiple times, but it still says blocked plug in. Im using firefox for now. any help? Firefox and safari are like night and day. i just want safari back.
Thanks.

Adobe support article.
Adobe Flash Player Troubleshooting
Adobe Flash Uninstaller

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

After the restore did the phone work properly for a while? Say, a day or so?
If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
Good luck

My itnues for pc is not working :( it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

Please helppppp

My touch screen isn't working and stopped working after I went running with it. I have restarted it multiple times and restored it on my MacBook. It will still not let me slide it to even look at the phone. Please help ASAP.

I took my iPhone running today and when I returned I was not able to slide it open or type in my pass code. All buttons are still responding. I have tried restarting it multiple times and even restored it, but the touch screen will not respond to anything. I also cleaned the screen off with a damp cloth. Please help! I WAS able to slide it open in the middle of restoring it but not able to click on any apps. Help! My life is on my iPhone and I am a nurse on call!

Try restore as new using computer iTunes.

I recently updated my new iPhone by plugging it in to my laptop. However, it erased all of the texts, contacts and pictures associated with my phone prior to the update. How do I get that information back?

I owned an iPhone 4s a year ago before I unfortunately lost it. I have since then bought the iPhone 5 but had not plugged it in to my computer yet to download any music. I plugged in my iPhone today to my laptop and my iTunes store stated that it registered that it was a new iPhone and asked if I wanted to restore or update my new iPhone with the information that was backed up on my old one. I chose yes, that I did want to restore the old information in to my new iPhone. However, now that I did that, my new iPhone does not have any of the contacts, texts or pictures that I had already on my new iPhone.
I desperately want my information back that was lost on my new iPhone when I updated the phone. Is there any way to get those pictures and information back? I logged in to my iCloud account and it still did not help get my pictures, contacts or texts back.

BarnsleyMif wrote:
I have recently updated my software on the new iPhone and when it backed up it backed up to the old iPhone
No such thing has occurred. iPhones do not backup to one another.
It is not possible to backup a different iPhone from the one being updated.
If the iPhone was restored with a backup from a different device, restore it again from the correct backup.
BarnsleyMif wrote:
how can I get all my new stuff back and stop it from happening again?
Pay attention when restoring the iPhone and select the correct backup to restore from.

I have a new iPhone and have kept my old one to play music in another room, when i recently updated my new iPhone it has backed up to my old iPhone and I have therefore lost pictures, messages etc from my new phone how can I get it all back?

I have a new iPhone and have kept my old one to play music in another room. I have recently updated my software on the new iPhone and when it backed up it backed up to the old iPhone, I have therefore lost pictures, messages and apps from my new iPhone as it has backed up to the last session of the old phone, how can I get all my new stuff back and stop it from happening again?

BarnsleyMif wrote:
I have recently updated my software on the new iPhone and when it backed up it backed up to the old iPhone
No such thing has occurred. iPhones do not backup to one another.
It is not possible to backup a different iPhone from the one being updated.
If the iPhone was restored with a backup from a different device, restore it again from the correct backup.
BarnsleyMif wrote:
how can I get all my new stuff back and stop it from happening again?
Pay attention when restoring the iPhone and select the correct backup to restore from.

HT1420 I have the new version of the macbook pro and I cannot find authorize this computer anywhere on itunes. I have read the directions multiple times and still cannot find it. Please help!

I have the newer version of the macbook pro and I have read the directions on how to authorize your computer to let you download previous song purchases from icloud onto your laptop, but I cannot find where it says "authorize this computer" at all. I have looked for it everywhere and still cannot find it. Please help!

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

My earpeice on my Iphone4 does not work. It acts as if i still have earphones plugged in. I have tried plugging in and out the earphone several times but it still has not resolved the issue. I have rebooted my phone but the problem still exits. Suggestion

Hi, I am using and Iphone 4 with OS 4.2.1, I recently started facing issues with my iphones earpeice. It acts as if the earphones are still connected. I have tried plugging in and out the earphones several times as per several posts confirming a fix for the issue, however i am still facing the problem. Please suggest..!!!!

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

Updated my iphone 3gs, lost my music and apps, they are backed up on itunes, how do I move them back to my phone, tried to sync but not working, please help

Updated my iphone 3gs, lost my music and apps, they are backed up on my computer but i cannot move them over to my phone, tried to sync but not working, please help

well first make sure that when you click on the name of your iphone on the left hand side of itunes that you go to the app and music tab and check mark the sync apps and sync music. then try clicking apply in the bottom right hand corner. then if not try doing it again after going to prefrences in the top menu and going to devices tab and click reset sync history if that doesnt work with music try and drop and drag to the name of your iphone, lastly if that doesnt work you can try restoring from a backup from before you updated. it will keep the new software but put everything that was on your phone when you created the backup back onto your phone.
http://support.apple.com/kb/HT1351 for syncing music

How to show the region multiple times on the same page

Hi,
I have a PL/SQL Dynamic Content region which creates a report with custom layout using pl/sql web toolkit. The stored procedure takes the parameter and creates report. Can I display the same region multiple times by calling it from loop with different parameter each time ?
Thank you,
Asha

Hello Asha,
In your plsql you can do a loop, so you would only have one plsql region but in there that can generate different areas of your website.
e.g. it can loop and generate different divs or tables.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/

How to get the values multiple times for the specified element - ABAP IXML.

Hi all,
         i have requirement to get the values for the specified elements multiple times. eg:., if the element is used in the xml 4 times then i need to get all the 4 values. here is the sample xml,
<View mmRelease="6.30" mmVersion="2.0" mmTimestamp="1180099591892" name="Comp_viewtestView" package="sap.com" masterLanguage="en">
<AbstractView.InboundPlugs>
<InboundPlug name="ip2">
<ParameterizedFeature.Parameters>
<Parameter name="ippara2">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.dictionary" name="binary" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
<InboundPlug name="hi">
<ParameterizedFeature.Parameters>
<Parameter name="hipara">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.ide.webdynpro.uielementdefinitions" name="Visibility" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
Here i need to store the following values in internal table, the element to get the values are,
(1) InboungPlug name and the respective values of "Parameter name" and "Parameter type" name value.
The output will be of 2 records & values should be
Inbound plug name = ip2
Parameter name    = ippara2
Parameter type      = binary
2nd record
Inbound plug name = hi
Parameter name    = hipara
Parameter type      = Visibility
These 2 records should be in internal table and then i will be passing to database table...
Can anyone provide me the code for the above......
Thanks in advance,
Vishnu.

I didn't get ur requirement..
As per my understanding, upload the XML file into an internal table and then loop over the internal table and get the values for ptype and pname..
XML ABAP - may b helpfull
Edited by: Veeranji Reddy on May 7, 2009 2:10 PM

Photoshop is opening multiple times...WHY??? (please help).

When I double click on an image (from Bridge for example) to open in Photoshop it will open up CS6 and then sometimes when I open another image, instead of opening up in the same open Photoshop program, it will open up an additional Photoshop program. Both CS6, Version 13.0.6 x64. Super frustrating when sitting with a client and trying to add an image to a document and it opens up in a different program... Is there a way to see where Photoshop is opening from? Why would CS6 be opening multiple times???
I don't think I noticed this happening before I upgraded to Mavericks (yes, this has been happening for a while). I also have a back-up program called SuperDuper that mirrors my system on a separate hard drive. Could Photoshop be opening from there, too?
Thanks for any possible help!
Deron

Use Lion Recovery to reinstall the Mac OS X.

I recently updated my new iphone 4 from ios6 to ios7. All of a sudden, my screen crashed and is now in a flashing white state with lines. I've reset the settings multiple times and the flickering has not disappeared. Please help

Similar Messages

Maybe you are looking for