I recently upgraded my 2007 vintage iMac from the Leapord OS to Mavericks. Now my system runs extremely slow when I start my apps. I only have 2G RAM. Do I need to install more RAM or is this something else?
I recently upgraded my 2007 vintage iMac from its original Leapord OS to the new Mavericks OS and now its really running slow. I've run disk utilities to confirm everything is ok from the hard drive standpoint ... but am wondering if this is simply a memory issue. I only have 2G of DDR2 SDRAM installed. Is there a minimum recommended for the Mavericks OS? Any other recommendations? Time to launch any app has more than tripled from what it was before the OS upgrade.
A combination of things:
1. Slower CPU and GPU.
2. Not enough RAM installed.
3. Upgraded from Leopard.
I would have backed up my files, erased the hard drive, then reinstalled Snow Leopard. Downloaded Mavericks and upgraded Snow Leopard directly. Then I would restore my files.
Upgrade your RAM to at least 4 GBs if supported by your model.
Backup your files, then do the following:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Similar Messages
-
I recently upgraded my laptop to one from the same vendor so all I had to do was to upgrade a few drivers on the hard drive. Unfortunately my copy of ADE is not so cooperative. Every time I try to download an e-book I get the message "E_AUTH_BAD_DEVICE_KEY_OR_PKCS12". Uninstalling ADE (all three versions) along with cleaning the registry does not clear the error. And I cannot de-authorize and reauthorize my new laptop as the de-authorize option is greyed out. Anyone else encounter this issue?
Problem solved finally. Used regedit.
https://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html -
I recently upgraded to 10.6.7 and Safari 5.05. Safari now has a long load time when you initially boot it up and when selecting a new tab. Other than that it works fine. What can I do ?
Check Safari / Preferences - Extensions. If you have any installed, turn that off, relaunch Safari.
If it's not Extensions, check for third party Safari add ons.
http://support.apple.com/kb/TS3230?viewlocale=en_US -
My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?
when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Upgraded my iMac to the new OS X Mavericks now iPhoto will not work.
I up graded my imac to OS X Mavericks now my iphoto will not work, it says there is an upgrade for iphoto available but will not let me upgrade with my apple id, can i delet iphoto and reinstall it with my apple id without loosing all my photos it was working fine till the OS upgrade.
1 - the iPhoto application and the iPhoto library (where you pictures are stored) are separate
2 - deleting the iPhoto application will not help
3 - if you log into the App store using the Apple ID that was used to install iPhoto (or set up the computer) you should be able to upgrade the application
4 - Apple ID issues can not be solved here - contact the App store support - link is on the right of the App store window
LN -
How do I speed up system after upgrading to Maverick on my iMac?
This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPHardwareDataType | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | grep -v 'ag$' | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`find "$d" -type f -exec sh -c 'file -b "$1" | egrep -q "XML|bin|exec"' {} {} \; -print`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
How do I add more memory to my Imac, I only have 1GB of memory and need 2GB to download Yosemite!
How do I add more memory to my Imac, I only have 1GB of memory and need 2GB to download Yosemite?
Janet,
This is why the question rkaufmann87 asked about your model is so important:
[click chart to enlarge if needed]
The list covers the early iMacs with Intel processors that shipped with either OS 10.4 or 10.5 and have only two RAM slots. As you can see, some have limits to what version of OSX you can install. If the step rkaufmann requests does not narrow down your model, you can do one more thing.
While the "About this Mac" window is open, click the "More Info..." button at the bottom of that window to get this (assuming you are really running OS 10.5.8 as shown in your profile):
The code I've indicated with the red arrow corresponds to the codes in the second column on the chart. Post the code your computer reports--again don't post a serial number.
If your iMac shipped with only 1GB RAM, I fear it is one of the earliest models that cannot be upgraded all the way to Yosemite. -
Apart from backing up all docs, music, movies and pics, what else do I have to do before upgrading my 2007 24"iMac with 2.33 Core Duo/2 GB SDRAM and OSX 10.4.11 to Snow Leopard10.6.3? from
In addition to the other suggestions, see:
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html -
Can users install more RAM on the new 21.5 iMacs?
Can a user upgrade and install more RAM on the new 21.5 iMacs?
butcherbird190 wrote:
This page says it is configurable to 16GB. Mac (21.5-inch, Mid 2014) - Technical Specifications
That means at time of order. -
Instructions how to install more RAM Intel iMac 17"
Does anyone know where i can find instructions on how to install more RAM? Preferably with illustrations.
Thanks,It´s supposed to be a phillips 2 screwdriver. It may also be difficult to open the lid if the screwdriver is too sharp. In Sweden we don´t usually call it by that name. If I only had read my swedish owner´s manual I would have knewn, or if I just had looked at the bottom of the computer before I purchased a phillips 0 screwdriver. That screwdriver might be useful in other situations and was quite cheap though.
-
i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??
Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
(125734) -
Debating whether or not to install more RAM????
Hi I have a macbook late 2010. I currently have 2.4 GHz and 2 gb of ram. I'm debating whether or not I should buy and install more RAM. I was thinking I would either buy 2x4 or 2x8. Would this be a worth it upgrade. My only other option would be waiting another year, and buying a macbook pro then. Also is it even possibile to upgrade RAM on macbook? Any help would be appreciated, and please back up your answers.
You're welcome. Based on your usage, your OSX, and the relative prices, I would go with 8 (2 x 4 GB) modules. This won't make your machine faster in a traditional sense...rather, it will prevent it from being slow...as it is now with extensive page outs. I would recommend purchasing the RAM from Crucial or OWC (both companies test RAM extensively, are very reuptable, and provide 1 year warranty included).
There is no late-2010 MBP 2.4 GHz model. Confirm RAM compatibility at crucial using their scanner tool:
Scan your system to view your specific system configuration.
You can confirm here as well:
http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html
Here are installation instructions:
MacBook Pro: How to remove or install memory - Support - Apple
Best. -
please help. recently upgraded to 10.8.5 however the Himedia player connected to my iMac via sharing can no longer connect to the iMac. the media player recognizes the imac and the shared files, however when you try to connect from himedia to imac it give a login unsuccesful.
Have contacted Himedia and they say its something to do with Mountain lionThis helps but
scroll bar very flat, slim and hard to see not able to customize
at least I know I have to suck it up and not loose anymore time
Thanks -
Installing more RAM into my Macbok Pro
Hey guys,
I'm looking to install more RAM (from 2 Gb to 4 Gb) into my MacBook Pro (15.4" Intel Core 2 Duo 2.2 Ghz) that I bought last September, and I'm strictly a software guy: I know little to nothing about hardware.
What kind of RAM do I need to install?
Also, I have the AppleCare protection plan. Will installing more RAM interfere with that at all? Do I need to have a Genius install it for me?
I've installed a RAM, hard drives, and video cards before so I know I can do it myself if I'm allowed to by the plan.
Thanks,
- KeithOpen your computer's User Guide. There's a whole chapter on upgrading memory in which the specifications are explained. If you don't have the manual you can download a PDF version from http://www.apple.com/support/manuals/.
Installing RAM will not void the warranty unless you cause damage in the process. -
Problem description:
Mac is running extremely slow. Get the scrolling pointer icon every time I click something.
EtreCheck version: 2.1.8 (121)
Report generated February 5, 2015 at 7:43:19 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 442
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: one day 9:39:51
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (177.71 GB free) - 112 errors
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.Affinegy.InstaLANa.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[failed] com.facebook.videochat.[redacted].plist [Click for support] [Click for details]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
Belkin Router Monitor Application (/Applications/Belkin/Belkin Router Monitor.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
Silverlight: Version: 4.0.60531.0 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Growl [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 141.13 GB
Destinations:
Back up [Local]
Total size: 250.06 GB
Total number of backups: 7
Oldest backup: 2012-08-25 14:58:25 +0000
Last backup: 2015-02-04 23:30:59 +0000
Size of backup disk: Too small
Backup size 250.06 GB < (Disk used 141.13 GB X 3)
Top Processes by CPU: ℹ️
14% mds
6% WindowServer
0% fontd
0% AppleSpell
0% notifyd
Top Processes by Memory: ℹ️
391 MB softwareupdated
185 MB mds_stores
137 MB com.apple.WebKit.WebContent
129 MB Finder
99 MB Safari
Virtual Memory Information: ℹ️
244 MB Free RAM
1.88 GB Active RAM
974 MB Inactive RAM
1.08 GB Wired RAM
34.01 GB Page-ins
130 MB Page-outs
Diagnostics Information: ℹ️
Feb 3, 2015, 09:59:28 PM Self test - passedPerform SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
The try a safe boot:
http://support.apple.com/en-us/HT201262
Any change?
Ciao.
Maybe you are looking for
-
Anyway to go back? (I guess it's downloaded but not installed) I'm keeping my phone off, but not dure that will be enough. Thanks
-
Question related to FILE SENDER handling of recordsets
Hi We have a File->RFC SAP scenario We are reading files using FTP File adapter. Splitting messages 100 messages per recordset. QOS is EXACTLY ONCE! If we have a huge file - lets say 100.000 records. The adapter starts reading and gets to 50.000th re
-
Does Adobe PDF work with Apple Products?
Does Adobe PDF and other Adobe products work with Apple products? Message was edited by: [email protected]
-
Export WebI Report in others formats
Hi, Is there any way to export a WebI report in HTML format. Current only the following output format options are available while scheduling a WebI report: 1) Web Intelligence 2) Microsoft Excel 3) Adobe Acrobat thanks!!!
-
If free upgrade is available to those who purchase after 6 June 11, Purchase should mean the order date or the invoice date or the delivery date?