I replaced an old airport extreme with a new one. None of my wifi devices will connect - always say incorrect password. Reinstalled old device, works fine. Any ideas?

I have a 5 year old airport extreme. I bought a new one to upgrade for better range. I connected the new one to the internet with a few problems, but a phone call to my internet provider resolved them. With an ethernet cable from the new airport extreme to my iMac, I'm connected. However, none of my wifi devices will connect. They see the network, but it either says "incorrect password" if I'm trying a new network name and password, or it repeatedly asks me to reenter the password if I use the old ones. I reinstalled my old airport extreme and everything works fine. I'm about ready to box up the new one and return it. Any ideas?

It is extremely difficult to fix these issues.. remotely.
If none of your wifi devices work.. that does sound unusual..
Have another try.. This time deal with the COMPUTER only.. leave everything else turned off.
Unplug the Extreme from the router.. reset it to factory.. do this full setup.
Unplug power from the Extreme.. hold in the reset button.. plug in the extreme to power and keep holding in the reset.. 10sec or so the front led should flash rapidly.. release the reset and wait a couple of min.
Now in the computer does the Airport extreme show up under wifi as new device??
Please make sure IPv6 is set to link local only to go further but it should work no matter what the settings are.
No luck clear out all the old wireless names from the computer.. reboot the computer and try again to scan for new wireless devices.
Hold the reset and try again.. it must appear in the wifi to be setup.
No sign of it the unit is faulty and can be returned.

Similar Messages

Can I replace an older Airport Extreme with a newer one by importing configuration file

Can I import the configuration file from an older Airport base station into a newer replacement Airport base station? It would seem this would save me a lot of extra work. First, it would hopefully save time by automatically configuring the new base station without me having to fiddle with the settings. Second, it might hopefully save some more time if I would not have to re-enter the network parameters for all the devices currrently connected to my Airport (wi-fi) network.
Read on for more details.
My old Apple Airport Extreme Base Station (AEBS) is not a gigabit one. Moreover, it's been experiencing some hardware failures recently. So, I recently purchased a new Apple Airport Extreme (base station) that is a gigabit one (Model# ME918LL/A with 802.11ac Wi-FI). Now, I'd like to replace the older base station with this newer one with the MINIMAL amount of disruption and manual work possible.
Regards,
Tony

I relaced an older AEBS with the new one, recently, and did not need to import anything, but if you can save the configuration file from your old one, then you can import it to the new one. I've never tried that when I switched, and it didn't seem to matter which suggests the configuration file may be on disk somewhere.

Replace an older AirPort Extreme with a new one

My new AirPort Extreme arrives tomorrow. I would simply like to use it to replace my three year old unit leaving all the settings intact. The manual does not say how to do this but I have heard it can be easily done.
Do I just swap cables and turn the new one on?
Thanks for your advice.
Jay

Looks like you already resolved your issue so I'm sorry I didn't see your post in time.
For future reference, when replacing AirPorts the process is relatively simple. By default, the new AirPort will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN
As you found out, it is best to first connect the new base station to the one you will replace using an Ethernet connection between them. This greatly facilitates the initial setup and makes it easier for the AirPort Utility to find both devices the first time.
You would also find that the new base station would show up under the OS X menu bar's AirPort icon as a new device. Clicking on this you would find that the AirPort Utility should automatically start up and take you through a step-by-step to configure it. Including an option for replacing base stations.
Enjoy your new "toy!"

How to replace a older Airport Extreme with a newer model? (OS 10.6 w/ Mac Mimi)

How do I replace a older Airport Extreme with a newer model? (Mac Mini OS 10.6.8 )

There is not much more to it than to buy a new one, and configure it using AirPort Utility.
You should be using AirPort Utility 5.6.1.
Power down your modem before removing your older Extreme and connecting the new one.

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Apple recently replaced my broken iPhone 5 with a new one. I backed up all my stuff in iCloud. When I set up the new phone I apparently used a back up from an earlier date. Now I am missing some of my stuff. How do I go back and use the most current I cln

Apple recently replaced my broken iPhone 5 with a new one. I backed up the contents of my phone with iCloud.
When setting up my new phone I used an iCloud back up from an earlier date. Now I am missing some of my most recent stuff. How
Do I go back to use the proper iCloud back up to set up my new phone?

Tap settings> general> reset> erase all content and settings...then you'll have a chance to setuo your phone again

Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?

Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?

try this...
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes.

How can I replace an older save file with a new one on game center?

Greetings,
I have been trying to change an older game saved file that I have created with my old Ipad with the new one that I have created on my new Ipad, both game files are played under my apple ID but I have no idea how to replace my older one with the new one.
The new file is superior to the old one so I wish to add the new saved file to my game center.
The game I am playing is Clash of Clans both file are created on apple products.
Let me know if there is a sulotion for that case.
Regards

Make sure the site folder created by iWeb is named exactly the same as the site folder currently on the server.
OT

Can I replace my current iPhone 5s with a new one in this case?

I just got my iPhone 5s two days ago, but it already has problems when I was trying to text with it while charging. The phone was doing all these random things like mis-sensed my typing really badly, jumping out to the main screen and even called the person I was texting. I even tried typing messages in Whatsapp, it constantly hides the keyboard from time to time and that's really irritating. While it's on lock screen, I could not slide to unlock it, I had to use my finger scan to access my phone in the end. The phone went normal again once I got the charge unplugged, but it went crazy again once I got it plugged in. I truely believe it's something wrong with the phone rather than the charger. Can I replace my current phone with a new one in this case?

Take it back. This is a warranty/purchase issue. We are just users here.

[SOLVED] Replacing an existing Arch drive with a new one

I want to swap out my SATA drive with a new one, without reloading anything, nor borking anything..... The original drive is 1TB, and the new HDD is also 1TB, albeit from different manufacturers.
I have WIn 7 in a 256Gb partition, and Arch in the extended partitions worth 750Gb. The drive is a 1 TB drive. (Hitachi)
Arch is my primary OS where I do all my design/cad work and office related stuff. Windows is only used as a gaming platform.
I have been given a NIB 1Tb Seagate Constellation enterprise class drive. It is significantly faster than my existing drive. I wish to switch the drives out.
I am really wanting to avoid a complete reload of both OS's.
My son tells me to use "dd" which I am familiar with, but warns that upon reboot Windows will likely have issues and be very slow.
I have a heavy workload at the moment, and just don't have a day to spend reloading both OS's from scratch.
Is there a better way to image a drive, partition scheme, boot sector, the whole smash (I have a 2TB drive to hold the image) .......R&R the old drive, install the new drive, then have the software then copy back over to the new drive the image with the partitioning scheme and boot sector (syslinux) without borking anything up in either OS?
Assistance is greatly appreciated. I have not needed to do this before...and I'm nervous.
Thank You!
Sincerely and respectfully,
Dave
Last edited by dcbdbis (2013-03-02 04:48:08)

FWIW, check if your new drive is one meant for the newer 4K sectors. If so, you should only blindly dd it if the old drive was also set up this way. If not, then you may need to align the copied data to the 4K sectors, or set up the partitions on the new drive appropriately. (Western Digital, for example, has an align tool that buzzes through the drive edging everything over to align properly. If you don't do this and your drive is copied out of alignment, then you can get some slowdown.)
Quite possibly not an issue for you, and there's more to it than I've typed. It's not hard to do right if needed. GParted can partition on the correct boundaries, and clonezilla quite possibly is aware as well (I haven't looked). You just need to see if your drives are set up as advanced format (or whatever it's called) and copy accordingly if needed.
I only mention this because there are currently mixed drive types out there and a surprising number of people don't know anything about this and might be taken by surprise.

Why does my Windows PC always say Incorrect Password when I Try to Connect to the Time Capsule storage by Airport for Windows?

I just installed AirPort on My Windows PC.
Now I wont to Connect to the hard drive of Time Capsule to share Data with my MacBook.
Air Port always says "wrong password".
I even tryed to change the password, restart the PC, restart Time Capsule ...
Nothing happans.
The Ethernet connection, Internet connection and printer connection works great, but not the Hard drive!!!
Can anyone help me???

Sorry I went off to dream land and Apple decided to glitch their server so the edit failed. I am answering different posts with different problems and went off about networking. Blame it on age.
You can ignore most of the post above.
But I do still want you to connect direct to the TC without any other connections.
Reset it to factory by holding in the reset and then powering on.. keep holding in reset until the led flashes rapidly. This is a total wipe of settings.
I do want you to use airport utility to access the TC.. to erase the disk, and restart as a fresh new TC.
Do not password it.. do not change anything from defaults except to turn on Guest network give it read and write permissions.. And to set the correct workgroup.. update the TC. .
Then try to access the TC . if it asks for a password it is public. username can be anything but either current username on the pc or admin.
BTW make sure you are logging into windows.. just booting straight to desktop ruins the security permissions and loads of things do not work. You must log into windows.. and then log into the TC.
If it doesn't work as I said try linux os or reinstall windows.. that is necessary every couple of years anyway.. it will work.. you have a permissions issue or networking issue.. these can be cleared.

I want to replace one of my older Airport Extremes with the new model. Any tips?

I have 2 older airport extreems that are connected by a network cable. They share the same Netrwork ID.
I want to replace one of them with the new model as I want to use the old router on another project.
Any tips out there for a no-issue switch?
Should the newer and faster Extreme be connected to the Modem or does it nt make a didfference?
Thanks

use the new router as your primary router with the modem - this will be a factory install from the default configuration - as long as you use same network name password and type a password that you used for the express in bridge mode, you should be able to plug it in and have it work like before. just make sure that you configure everything individually and then power all devices down and repower each one individually starting with the modem then the router in the express and that should work

Is there any way to print wirelessly using Airport Extreme with an older printer (HP Laserjet 2100 TN) - no USB connection.

I have an older printer and currently use a Cisco wireless router with Network Magic software which allows me to leave my 30 pin printer connected to the desktop computer and share the printer with everything on the network. Does the Airport Extreme allow for this? I am just connecting one that I purchased but can only find documentation on connecting the printer via USB (which my old printer does not have). The printer is late 90's vintage, but its comercial grade and is still one of the best printers I have used so I want to keep it going for now.

I don't really know much about anything BUT with that said, I have PCs, I have an old commerical work horse HP laser printer that works with the Airport Express as a print server through my wireless router. But having problems with my wireless router, never my AE, now how to change from WEP to WPA etc.for a new wireless router. Maybe I need to look into the Extreme. Good luck

Can I use a USB drive with the Airport extreme (not the new one) for Time Machine?

I thought I heard that using USB drive for Time Machine over wifi will work with the new, tall Airport Extreme, but not with the previous model, which I have. Anybody know for sure?
thanks.

It is not recommended.. Apple says it doesn't work.. for some people it does for others it is unreliable.. do you really want unreliable backups.
See http://pondini.org/TM/Airport.html

Do I need to reconfigure airport extreme with a new modem?

I looking into buying a new modem (Motorola SB6120) to take advantage of Comcast's DOCSIS 3.0 speeds. Just wondering if I will have to reconfigure my airport extreme?

You shouldn't have to reconfigure the AirPort Extreme, but it is always a good idea to perform a complete power recycle of your networking equipment when replacing any one of them.
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

I replaced an old airport extreme with a new one. None of my wifi devices will connect - always say incorrect password. Reinstalled old device, works fine. Any ideas?

Similar Messages

Maybe you are looking for