I reset my ipod touch and now it says to conect to iTunes and im on my computer and the ipod is pluged up but its still not working HELP please!!!
HELP MEEE!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
my sis. tryed to break my pass and now it says to conect to itunes but i captured so many photos from the last sync how to sync without deleting this photos please help
egzoni 123 wrote:
my sis. tryed to break my pass and now it says to conect to itunes but i captured so many photos from the last sync how to sync without deleting this photos please help
If you Restore using last computer you synced to the password will be removed and you can restore the last backup on your computer, which includes your camera roll.
If you enabled Photo Stream in iCloud your photos are in Photo Stream.
If you had installed one of the many apps that can upload photos to a photo sharing site and had used it you will have your photos.
If you have done none of these things you are out of luck. The phone comes with many tools to preserve content, but you have to use them. -
I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?
You need to install Office on the computer from the installer DVD or disc image you purchased.
-
When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please
Try closing all apps in Multitask Window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe up on the screenshot of the app you want to exit.
3. The app will fly off the screen -
I just purchased an iPod Touch 5 for my brother for Xmas. Can I transfer music from my computer to the iPod Touch without messing it up for him when he plugs it into his computer for the 1st time? Dave
No since you can only sync with one computer.
To switch syncing computers:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
I have restored my ipod nano 2nd generation but its still not working
i have reset my ipod and restored it but it is still not working. i have connected to itunes and it has loaded some music onto it but though the light comes on you cannot see anything else on the screen. any suggestions would be appreciated
It might be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damage part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock -
Hi, i have a ipod classic, it now wont turn on or do anything, i have charged it, toggled the HOLD button and tried all the suggested press and hold, but nothing. Ive tried conecting it to the computer via a USB cable again nothing, its not even showing on my Itunes account when thats turned on.
Any one got any ideas, TIMHave you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life. By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
iPod won't turn on
B-rock -
please help me use my ipod touch. i just got it and im a little confused on how to use it. it keeps asking for a wifi connection even while im logged in on itunes
iPod touch User Guide (For iOS 5.1 Software)
Are you connected to wi-fi?
If not, then connect. -
Can someone plz help
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
iphone 3gs- updated to the ios 5.0.1... since then i plugged it into itunes, an now my phone restarts itself every 3-4 minutes!!! it so annoying! its useless, i cant do anything with it. restored it 4 times and its still doing it!!! please help!!!
i contacted o2 and they said id have to pay to get it fixed after sending it away for ten days if their was a fault, when im still under warranty!! contacted apple who will get back to me!I am assuming you updated to version 5.1.1, not 5.0.1 since no legitimate version of 5.0.1 is available.
Where is this iPhone from and what means did you use to unlock it? -
ipod nano touch screen is not responding to my touch and whenever i click on something it just shows up as a white box
Have you double check to make sure VoiceOver and other accessibility features have not been turned on? See this article for more information and assistance.
iPod nano (6th generation): How to use VoiceOver
B-rock -
I have double, triple checked to script and I can't find any errors.
The only thing I might be unsure of is the actual site that I am listing. I tried https://www.webmail.????.com and I tried https://www.????.com. Is it that its a secure site? HELPDid you try to use the keyboard instead (Cmd+V and Cmd+X and Cmd+C)?
Maybe Shift + Insert works as well on Mac (does work on Windows and Linux).
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/ - AllowClipboard Helper -
can someone please help.
Activation Issues > See here > http://support.apple.com/kb/TS3424
Also see this discussion > https://discussions.apple.com/message/21189708 -
i really need help solving this kind of problem because i love my phone pleace help me
iOS devices cannot play every format that can be played on other devices. You can convert unsupported formats to a supported format for import to your iOS device.
Here's one solution to use if you're ripping DVDs:
http://www.ipadvideoconverter.com/
Here's a little guide on the use of periods at the ends of sentences:
http://en.wikipedia.org/wiki/Full_stop -
ok so my ipod touch is saying theres no music on it but when i plug it up and get on itunes it says theres music on it but its still not showing up on my ipod. help anyonee??
Have you tried resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Next would be to unsync the music and then try syncing the songs to the iPod
- Last would be to restore from backup.
Maybe you are looking for
-
IMac, 2010, will not boot after update
After downloading Yosemite, my 2010, 27" iMac will not reboot. It appeared to install ok but it stayed white screen, no text for more than an hour after it automatically rebooted. Idaes?
-
Problem in field symbols in ecc6.0
i have the following code written in 4.6 version now i am executing the old report in 6.0 but i am facing with some unicode error. FIELD-SYMBOLS: <line_of_bs_table> LIKE tbl1024, READ TABLE bs_table INDEX row_bst ASSIGNING <line_of_bs_table> . buffer
-
Python-scipy vs. python-numpy [solved]
Up till now I have been using a custom package for python-numpy (the successor of python-numeric) and the AUR package for python-scipy (which depends on a working numpy installation). However, now the scipy package seems to be adopted and when I try
-
How does one use scripting in Aperture? Any good examples anywhere for dealing with projects, albums, versions, etc.? Specifically, I'm trying to display a list of albums but it's not working. I can list the projects without any problems. Here's the
-
Launching Photoshop CC from dock asks for serial number [was:what is this?]
What is this? I just want to use photoshop on my laptop using the same license I use for my desktop. Please help