I restored my sons iPhone 4 because he disabled it and now it won't accept his Apple ID. I'd and password are ok because I signed into it on mu iPad. What can I do please.

I Restored my sons iPhone 4 because he disabled it, now it won't accept his Apple ID and password, which are correct because I can log into it on my iPad. What can I do please.

I Have restored iPhone from iTunes but now I can't reset it up because it is telling me that I need to sign in with Apple ID that was used to set up the phone, I thought it was my sons.....

Similar Messages

  • My laptop hard drive with my itunes library died and now itunes won't sync my ipod to the libary on the new drive without first deleting everything on my ipod. What can be done?

    My laptop hard drive with my itunes library died and now itunes won't sync my ipod to the libary on the new drive without first deleting everything on my ipod. What can be done?

    Sync with new computer
    https://discussions.apple.com/docs/DOC-3141

  • I updated my iPhone and now it won't accept my Apple password.

    After "upgrading" to iOS7, my phone continues to tell me that my Apple password is incorrect. I've changed the password, received confirmation that the new password is good, entered the new one, and - - - been told that the password is incorrect. Except it worked just fine logging on to this fine support network, so I don't think it's the password. I also checked the settings, and my user name and password are ok there.
    Apple customer support is being very nice, but offering no solutions. I'm hoping someone here can point me in the right direction. Thanks!

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • I upgraded to OS 6 on my iPhone 4 and now it won't accept my password

    i upgraded to OS 6 on my iPhone 4 and now it won't accept my password

    Hello Nikmuz,
    It sounds like your screen is either black so it looks like it is not on, or it is just plain not turning on at all and it is also not being recognized in iTunes. I would recommend the followng troubleshooting from this article to help you determine whether that is the case or not, named:
    iPhone: Hardware troubleshooting
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    While connected to the iPhone charger, try to reset the iPhone.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I changed my apple id and password online, but my iphone still has the old id and now it won't accept either the new or old password

    I changed my apple id and password online, but my iphone still has the old id and now it won't accept either the new or old password

    To change the iCloud ID on your device you have to go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. 
    If you are changing to a different iCloud account and need to migrate your data to this new account, when you are prompted about what to do with the iCloud data be sure to select Keep On My iPad.  Then when you sign into the new account, when prompted choose Merge.  This will upload the data to the new account.

  • I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

    I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

    You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

  • I tried to download the newest version for iTunes and now it is saying something about Apple Mobile Device. And now my iTunes will not complete the new download because of this. What does this mean???

    I tried to download the newest version for iTunes and now it is saying something about apple mobile device. Never heard of this before and now it will not finish downloading because of this. What is it?? What do i need to do to get itunes to download onto my computer again??

    I got most of it done but now it is not letting me delete my C:\Program Files\Common Files\Apple
    It says that file is open in another program....What do i need to do to delete that?
    Do you currently have the iCloud control panel installed? If so, uninstall that. Can you do the deletion now?

  • HT1212 I changed my password and now it won't accept it.  I have the most recent update.  I think it's IOS7.02.  I know what password I used but it won't accept it.  Please help

    I changed my passwork and now I'm locked out.  I know the password that I used but it wouldn't accept it.  I have never synced to iTunes.  What to do?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My message and FaceTime app won't accept my apple ID on my iPhone 5.

    however it works on my ipad and macbook. how do i solve this issue? i can only use my mobile number.

    I Have restored iPhone from iTunes but now I can't reset it up because it is telling me that I need to sign in with Apple ID that was used to set up the phone, I thought it was my sons.....

  • I dropped my iPhone 3G and now it won't past the apple logo screen

    I was listening music this morning and I accidentally dropped my iPhone 3G and hit the floor, it turned off in
    that moment, and I tried to turn it on and didn't work, when I got home I connected to the
    computer with the USB cable and the apple logo screen showed up but after aprox. 15-20 seconds
    turns off, and iTunes doesn't recognizes it, is there any solution or do I need to take it to repair?

    Reset, hold both Home and Power buttons until the iPhone begins to restart, usually takes about 10 seconds of holding both buttons. If still problem, Restore iPhone, connect iPhone to computer with iTunes 10.7 or 11 open, hold both Home and Power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click Restore button of iTunes. If still problem perform DFU Mode Restore of iPhone.

  • I did an update to my wife's iPhone and now it won't connect through the 3G. It says you are not connected to a cellular data service

    I Updated my wife's iPhone the other to the new operating system. It asked me first to use iCloud backup so I did. After the update was complete my wife can use wifi but when we try the 3G it says you are not connected to a cellular data service.
    IT shows Bell as the provider but we seem to have lost something during this update.
    can someone help me please.

    Check Settings>General>Cellular and make sure Cellular Data is set to On.  If it is, try putting it in Airplane mode for 15 seconds, then turn Airplane mode off again.  If it persists, give you carrier a call to confirm that it's properly activated with them and that your data plan is properly provisioned.

  • I have just updated my iphone 4 and now its saying activate phone with apple id. i have and its not working

    I have  just updated my iphone  4 and it now says activate iphone. I have tried doing this with my apple id and it isn't working.

    What is the exact message displayed?

  • I finally got my iphone out of recovery mode, after 7.1.1 but now it won't accept my Icloud info and states "An error occrured while trying to save the Icloud account?" What do I do????

    I tried updating my iphone 4 to 7.1.1 and it went straight into recovery mode.... I finally got my iphone out of recovery mode, but now it won't accept my Icloud info and states "An error occrured while trying to save the Icloud account?" What do I do????

    Same situation. I installed iOS 8 beta 4 on my iPhone 5 and a few days later my iCloud account disappeared. My contacts and calendar entries are gone.
    My Mac Mini and MacBook do sync as they should with iCloud.
    When I try to log in to iCloud on the iPhone (the username shows "[email protected]" and password shows "required"), I put in my username and password and tap "Sign In", It says "Verifying" at the top and after a while checkmarks appear next to my username and password. Then I get an error message saying "An error occurred while trying to save the iCloud account". If I tap OK the message goes away, leaving my username and password intact (checkmarks are now gone). If I tap "Sign In" again I get a message saying " '[email protected]' is Already Added. This iCloud account has already been added to your iPhone". If I go back to Settings and then go into iCloud again it's not set up and appears as I stated at the beginning of this paragraph.
    Nothing works and the sync does not occur. Contacts are empty and Calendar has no entries.

  • My sons iPhone 5c is disabled, it says connect to iTunes, when we do that it says do you trust this computer and then it says you must confirm this on your phone, but I can't because it is disabled

    my sons iPhone 5c is disabled, it says connect to iTunes, when we do that it says do you trust this computer and then it says you must confirm this on your phone, but I can't because it is disabled

    http://support.apple.com/kb/ht1212
    Look at the section titled:
    If you have never synced your device with iTunes

  • IPhone 5 has ran out now it won't charge ? I can't reset because my power button is broke ? What can I do, please help

    iPhone 5 has ran out now it won't charge ? I can't reset because my power button is broke ? What can I do, please help will my one year warranty cover this ?

    Try cleaning the dock connector.  Try a new cable or charger.
    If no luck, it should be covered under warranty.

Maybe you are looking for

  • Service desk integration with 3rd party tool

    Hi all, I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm. So far it's clear that I need to activate and configure the service provider and consumer in soamanager. The webservice then will be called by

  • How do i Record at 96hz on Cubase using  MAC OS.X 10.10.2

    Hello, i have been having troubles to record at 96k.. i have asked my USB Audi Interface company to assist me but they said that for some reason my MAC OS wont support  recordings at 96k.. anyone with a way to get around to record at 96k ? My Audio i

  • F.19 - criteria for creation of documents?

    Hi All, I am looking for the specific criteria that creates multiple documents after F.19 is run. Example - when I run F.19, I get multiple documents in my adjustment a/c and target a/c. These documents do not seem to follow any logic (such as by Tra

  • Can't print PDF file with "Technical" font

    Having a problem here. Any PDF file I get that includes the font "Technical" will not print on my HP laserjet. It displays perfectly, but won't print at all. I do have "Technical.ttf" and "Technical_Italic.ttf" in Library->Fonts folder, and they show

  • What exactly is contained in "Components Level" output of Harmonic distortion Analyzer VI?

    The Components Level output of the Harmonic Distortion Analyzer VI is described in the help file: "components level contains the array of amplitudes of the measured harmonics in volts if the signal in is in volts. The array index is the harmonic numb