I seem to of reached my limit of five computers for my iTunes account. Where can I manage those five so that I can drop one to add one?

This link tells you how:
http://support.apple.com/kb/HT1420
You deauthorise all and the reauthorise the ones you want.

Similar Messages

HT201070 I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

Thanks to Bobthefisherman & Turbostar. Turns out I've got a corrupted disk (which I found out via "verify disk" on Disk Utility First Aid. Previously, I never thought to verify disk -- only to repair permissions -- so I never knew my HD had been corrupted.
Wasn't able to do a clean install of OSX10.6 because my SuperDrive only sporadically will load discs, so I am taking it to the Apple Store to see if they can do a clean install, and depending upon costs, get the Superdrive replaced.
The HD wasn't partioned by the way. And I did have just over 40GB of contiguous space.
Thanks again.

I seem to have lost "list view" for my iTunes library. The option doen't even appear on the view drop down. Any conncection to iCloud?

I seem to have lost the ability to select list view for my iTunes library. The choice for lst view doesn't even appear on the drop down when selectiogn "view". Any ideas? I recently enabled the cloud and subscribed to iTunes Match/ Any connection? Thanks/

See this thread for background on why iTunes can end up with duplicates and how they can be systematically removed. The script there is for Windows users and the "show duplicates" menus have moved around in iTunes 11, but the advice on clearing recently made duplicates should still hold.
As given in my older post "Reorganize library" is meant as a one time command to change the structure of a pre-iTunes 9 library into the newer layout that places music in its own subfolder of the media folder. Once used, if the option becomes available again that suggests that a file called .iTunes Preferences.plist in the media folder has been deleted or editied.
See also this post.
tt2

My main pc died. How do I get my complete library on the replacement pc. Apple says I have authorized the limit of five. I only recall doing so on the dead pc and an IPAD. My IPAD suggests that I am on the cloud but I don't recall setting that up.

My old PC with my Itunes library died. I have attempted to authorize it's replacement but the store tells me I have reached my limit of five. I don't recall doing this so my guess is that and old dead Ipod as well as old dead PC's could be deauthorized ONLY and I would be good. As I read the Itunes store options it appears I can only deauthorize all five. I am afraid I will loose all my library; I'm not shure I have an up to date backup with Itunes I am reluctant to take that step.
I can take the hard drive out of the dead computer and fix so that I can restore from an up to date library. I have never done this before and am scared I might erase my best option. I also have a major portion of my library on a NANO which replaced the dead IPOD which maybe can be used to restore the replacement PC.
I don't recall setting up Icloud and vaguely recall backing up to itunes but can't confirm that my library is completely backed up. Itunes tells me that my Ipad and a PC are authorized for Icloud but I don't recall setting that up. I can assume that the PC that is Icloud authorized is the one that died. If I have to deauthorize all, will I errase my library? If not will I have to restore my nano and Ipad and the replacement PC? How can I confirm that my library is backed up/in the cloud?
My Ipad shows cloud icons along whith what appears to be my library.
Given this info, what is my best option to restore my complete former Itunes library to my PC.
Thank
DRC16

Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

I can't open iTunes on my brand new Mac!I am getting the message that I am exceeding my limit of 5 computers! Huh, I only have two desktops and two laptops (not counting my new MacBook Pro). I do have an old (discarded) laptop that had iTunes! Help!!

Hi! I have a new MacBook Pro, but I haven't been able to put iTunes on it even though I have used it for years on my iPhone, iPad, and two Windows desktops and two Windows laptops. I keep getting the message that "I am exceeding my iTunes account limit of 5 computers (not counting my iPhone and iPad, which are explicitly excluded from the count according to the message)". As anyone can see, I only have 4 computers, so I should not have any problems with installing iTunes, but this same message says that I need to deauthorize at least one computer or maybe I have extra authorizations on a computer.
I can't even find a list or map of the computers on my iTunes account! Please, somebody help ASAP!!!!! Thanks!!!!!
Murray in Atlanta
**** cell
Message was edited by: lmfj20001
<Personal Information Edited By Host>

Deauthorize all of your computers and authorize the computers you use.
http://support.apple.com/en-us/HT6283
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Best.

HT2731 I can't seem to open itune account, I live in Bulgaria but I am English, and can't read bulgarian?

Hi my friend has just bought an ipad mini, so wanted to open an itunes account, she can't seem to do this, as it puts her into a bulgarian store, and we can't read or understand bulgarian, so how can we open an account for her.

If she is in Bulgaria then she will only be able to buy/download content from the Bulgarian store. How are you trying to create it ? You should be able to create it via a computer's iTunes e.g. if you want to create it without giving credit card details : http://support.apple.com/kb/HT2534
- if you are currently logged into an account then log out of it (Store > Sign Out menu option)
- find a free app in the store
- click on its free price
- click on 'create Apple id' on the popup
- agree to the terms and conditions and fill in their details
Those screens in iTunes should pick up the language that is set on your computer (they do on my Mac), the only screen that I get in Bulgarian if I set my country to Bulgaria is the terms and conditions page.
If you want to read the terms in English then if you initially select the UK (you should have a flag at the bottom right of the store's pages) and then do the above steps - when you've filled in your details and are on the payments screen, at the top of that you should then be able to change the country to Bulgaria :
You will then be taken back to the terms screen which you can agree to and 'continue' and the personal details screen should be pre-populated with what you've just entered and you can then go to the payments screen and enter their Bulgarian address.
Or you can see the full terms here : http://www.apple.com/legal/internet-services/itunes/uk/terms.html

My children have "ask to buy" on their accounts, but can't now seem to spend money credited to them via gift card, their purchases revert to my credit card ?

my children have "ask to buy" on their iTunes accounts, but can't now seem to spend money credited to them via gift card, their purchases revert to my credit card ?.. i want them to be able to spend their money first !!

Claudius,
either you didn't read my post, or you jumped to conclusions.
I had a skype account that was created using a microsoft account (NOT THE ACCOUNT I AM USING NOW). PURE MICROSOFT ACCOUNT NO OTHER ACCOUNT LINKING.
I had to change the primary mail of that account.
I was told "no can do" by skype support.
I found that if I went to account settings and clicked on the link on the line below the one that said "MICROSOFT etc" (labeled something along the lines of "TV or Device") I got the opportunity to set the password of the "live:username" account (WHICH YOU COINCIDENTALLY HAVE TO DO IF YOU WANT TO USE SMART TVs ETC).
Once that was done, I COULD SUCCESSFULLY DO WHAT SKYPE SUPPORT SAID WAS IMPOSSIBLE- I could change the primary mail address.
once that was done, and NOT BEFORE, I linked the account to a facebook account as well, just to be sure I have more than one way to access the skype account.
What caused you to get the impression that I was writing something else?
furthermore this sentence - "The solution you described in your initial message isn't actually once since all the time you were operating on different account that weren't actually linked" does not make sense, I think you mis-edited it.
and I need to point out that you are incorrect. I WAS NOT OPERATING ON DIFFERENT ACCOUNTS I WAS OPERATING ON ONE SKYPE ACCOUNT, THAT WAS CREATED USING A MICROSOFT ACCOUNT just like you say you recommend. I still don't know how you can misread my initial entry like that.
If you have a better solution to my initial problem - changing the primary mail of a skype account created throuth either a microsoft account or a facebook account, Please write a sticky to explain how to do it, and please inform skype support that Yes it can be done, and this is the way it is done. So far my "lucky shot" seems to be the only way to do it.

The number of display columns in the report reached the limit" Interactive Report

I get the error message of "The number of display columns in the report reached the limit" when trying to display less than 100 (100 is limit) columns when an aggregate has been created.   This does not happen when an aggregate has not been added to the IR report. It seems to happen because I have a control break on as well. When I turn off the control break it works but is not the result that we want. Interesting enough, if I filter the results down to 500 rows it works just fine. Does oracle treat aggregates as columns!? This is a really odd issue that I really need to clear up.
Oracle 11g
apex 4.1.0.33
Thanks in advance,
Shawn.

Hi,
i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
I have a table
test_blob (id number, name varchar2(10), blobcont blob)
If I create IR like
select
    id,
    name,
    blobcont
from test_bloband then I define download format I hit the error.
If you want this to work you have to change your query to
select
    id,
    name,
    dbms_lob.getlength(blobcont) blobcont
from test_blobAnd then again define download format for blob on blobcont column.
Regards,
Aljaz

Twrtab reached memory limit

Hello all,
In upgrade to ERP 6.0, phase TP_ACTION_CP2STRIG, got the following error
4 ETW000 twrtab reached memory limit; memory usage 2000000000
4 ETW000   0 d /   3 i / 1497 u /   0 =   0% ucf USR12~
4 ETW690 COMMIT "5709000" "472939294"
Tried OSS note 103562 - specified TCS parameter 1Gb, 4Gb, and 5Gb without success. Updated diffrerent profiles \put\bin\TPPARAM, EXDBNEW, CP2SHDT and DEFAULT.
It seems that CP3SHDT is copied from somewhere, which does not contain the TCS parameter.
Would appeciate any help/input
Thanks,
Terry
R3trans.exe version 6.14 (release 700 - 14.05.08 - 17:05:00).
Edited by: Terry Kempis on Jun 19, 2008 8:35 AM

Hi Markus,
I checked the CP2SHDT.ELG (which is on earlier phase TP_ACTION_CP2STAB) and did not have that parameter and it completed succcesfully.
I only tried to add the TCS parameter while in the issue phase TP_ACTION_CP2STRIG (after getting this memory problem).
Below is the CP2SHDR.ELG (for phase TP_ACTION_CP2STRIG).
This SAPEBBX700.IP3 is the one it is trying to process.
Thanks,
Terry
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
COPY TO SHADOW and RETURN CODE in SAPEBBX700.IP3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETP195 log file is not complete ==> "R3trans" terminated for unknown reason
Long text:
    Cause
      When a program terminates, it usually leaves information that can be
      analyzed. This is not the case here. All that is known is that the
      program terminated and that the log is incomplete.
    System Response
    What to do
      The only thing known for sure is that the transport step was not
      completed and must be repeated.
2EETP200 Export with errors, request will not be imported
Long text:
    Cause
      The export was finished with errors or terminated (return code >= 8).
    System Response
      The request is not imported. Instead it is set back to "can be changed"
      in the source system.
    What to do
      The export log contains remarks concerning the reason for the incorrect
      export. Correct the error and repeat the export.

Creative Cloud Membership has reached its limit for hosted sites

I have had a paid Adobe Muse Creative Cloud membership for about 2 years now, and only used one website. I understand I can host up to 5. But for some reason when I try to launch a new site, I am told my membership has reached its limit for hosted sites. Can someone please tell me if I have some test pages I'm hosting (or something) and how I can erase them so I can make room for my new site. These are only personal sites so I do not need a business catalyst url for testing. I have the two domains active now and just need to be able to have both go live.
My email is [email protected]
The web page I'm trying to launch is www.ninetiesband.com. The only site that should be active right now is www.wearenightsbridge.com.
Thank you for any help you can provide.
-Mickey

Hello Mickey,
I checked your subscription details, and it looks like you're subscribed to Adobe Muse single app subscription, and not Creative Cloud subscription. When you sign up for Muse single app subscription (yearly), you get one free site to host with Business Catalyst. You only get 5 sites when you have a full Creative cloud subscription.
Cheers
Parikshit

Why am I getting a "Adobe Creative Cloud Membership has reached its limit for hosted sites" message?

I just tried to push my FIRST "free" Creative Cloud site live and got the message "Your Adobe Creative Cloud Membership has reached its limit for hosted sites. To push this site live you will need to purchase an additional hosting plan." I thought CC membership was supposed to give you 5 free hosted web basics sites?
I am a premium BC partner and so far have my partner site and a paid Webcommerce site . In addition to the site I'm trying to put live I have 2 other trial sites (think they are designated as WebMarketing sites) of which one is expired. So where does the limit come in as this is so far my only WebBasics site?
Please help as I need this live urgently (without additional expense).

Hi Judy
Appologies for this un-answered post, if any related issue is still active please reach out to our support directly.

I have create many free acounts for apple I have reached the limit of creating free acounts how can I delete that free acounts which I have made?

I have create many free acounts for apple I have reached the limit of creating free acounts how can I delete that free acounts which I have made?

iOS devices can only create 3 free iCloud accounts, Get a new iOS device
why would you need more than 3 iCloud accounts for 1 device o.O

The number of display columns in the report reached the limit. Help!!!

Hello Everyone,
This might be dumb question. But why do get this error with a IR report? and what is the solution for this. Please help me with this.
Error
The number of display columns in the report reached the limit. Please click Select Columns under Actions menu to minimize the report display column list.
Oh.. And also i have a blob column.. if the format is not given, then the table is fine.. but happen to get this error only when the blob download format is given.
Thanks and regards
John
Edited by: JB on Mar 30, 2012 11:08 AM

Hi,
i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
I have a table
test_blob (id number, name varchar2(10), blobcont blob)
If I create IR like
select
    id,
    name,
    blobcont
from test_bloband then I define download format I hit the error.
If you want this to work you have to change your query to
select
    id,
    name,
    dbms_lob.getlength(blobcont) blobcont
from test_blobAnd then again define download format for blob on blobcont column.
Regards,
Aljaz

Material Transaction sequence reached max limit in Version 11.0.3

Problem Desc:
Oracle Applications Version 11.0.3
Material Transaction sequence reached max limit.
Material Transaction sequence got exhausted.
All the material transacted got stuck in AQ Process.
Material transactions done are pertaining to PO Receipts, Sub Inventory transfer, Inter Org transfer,
Could you please advice a solution.
Thanks and Regards
Aditya

Hello,
I had similar problem standard seq reached max limit. I could not book sales order. Solution from metalink was simple alter seq.
http://docs.oracle.com/cd/B13789_01/server.101/b10759/statements_6014.htm
MAXVALUE
Specify the maximum value the sequence can generate. This integer value can have 28 or fewer digits. MAXVALUE must be equal to or greater than START WITH and must be greater than MINVALUE.
Regards,
Luko

HT201317 All the photos dowloaded to the photo stream in my mac, will it be saved forever or does it get deleted after reaching 1000 limit ?

All the photos dowloaded to the photo stream in my mac, will it be saved forever or does it get deleted after reaching 1000 limit ?

Photo stream photos will be deleted once you reach 1,000 unless you import them into iPhoto. You can set your iPhoto preferences to import them automatically.

I seem to of reached my limit of five computers for my iTunes account. Where can I manage those five so that I can drop one to add one?

Similar Messages

Maybe you are looking for