Material Transaction sequence reached max limit in Version 11.0.3

Problem Desc:
Oracle Applications Version 11.0.3
Material Transaction sequence reached max limit.
Material Transaction sequence got exhausted.
All the material transacted got stuck in AQ Process.
Material transactions done are pertaining to PO Receipts, Sub Inventory transfer, Inter Org transfer,
Could you please advice a solution.
Thanks and Regards
Aditya

Hello,
I had similar problem standard seq reached max limit. I could not book sales order. Solution from metalink was simple alter seq.
http://docs.oracle.com/cd/B13789_01/server.101/b10759/statements_6014.htm
MAXVALUE
Specify the maximum value the sequence can generate. This integer value can have 28 or fewer digits. MAXVALUE must be equal to or greater than START WITH and must be greater than MINVALUE.
Regards,
Luko

Similar Messages

The amount field in table GLPCT Activity RFBU is reaching max limit of

Hi Experts,
Need your help on below issue.
The amount filed in table GLPCT, company code 123, account 110000, Activity
RFBU and SD00 is increasing every year, and now the sum is close to the
limit of 9,999,999,999,999.99- .
this amount field is continue to increase, if depend on data when
performing year-end closing and balance carry-forward.
So, Each field contains 15 places, which leads to a maximum amount of
999,999,999,999,999 When the value reaches the maximum amount, an
additional update of an amount is not possible anymore.
System cannot update the Balance Carry-forward amount for 2012.

Have you communicated with SAP about a possible solution?

Max limit reached for tablespace in SAP BW

Hi Friends,
We are having one SAP BW system on DB6, AIX...in that the max limit for tablespabe is 512GB, which is going to be exceeded soon...
So it is planned to move some tables from tablespaces of aggregates i.e. FACTI, FACTD into new tablespaces...
How can this be achieved?
Thanks & Regards,
Kunal Patel.

He Kunal,
As mentioned by Jens, you can use the DB2 9's Large RIDS (Larger Record Identifiers) support which significantly increases the size limit for table space. SAP has a tools to do the conversion for you - OSS Note 11058956 (ABAP tool for activating large RIDs).
Regards,
-Beck

GTX 970 4g OV max limit...any problem with that??

Hi, my 970 stock voltage is 1,212v and the ASIC is 65,4% (quite low) and vbios 84.04.2f.00.f1 ...in afterburner, despite there is a slider from 0 to +87v it seems like there is only 3 steps in voltage increase...for me they are:
+0=1,212v
+0 to +25mv=1,237v
+25 to +87mv=1,256v
-Is it SAFE to run the card at 1,256v 24/7 (obviously only when gaming)???
-Why the slider is not applying the voltage in increments as slider indicates??, I mean, +37mv should be = +37mv voltage increase right??
-And the most important thing...ONLY when voltage reach 1,256v I see in the graphs that the OV MAX LIMIT = 1 all the time (or most part) so I wonder is its SAFE to run the card with ov max limit =1???...according with the 1,256 I think there is lots of people running the card this way but not sure if ov max limit =1...
Finally, I can run the card at 1486Mhz core (+170) and 3507Mhz memory (+0) at +25mv (1,237v) without the ov max limit at 1 should I leave the card just there???
Many many thanks guys!!

Quote from: watermanpc85 on 28-April-15, 19:22:29
Thanks for the reply...I dont know hopw to upload the actual bios file but I recently updated the bios to the .186 version (latest)...now it says 84.04.36.00.f1.
The vbios version is NV316MH.186 the numbers from gpu-z (84.04.36.00.f1) are irrelevant and do mean nothing.
Quote from: watermanpc85 on 28-April-15, 19:22:29
So I asume that there is not any problem by running the card with OV max limit=1 right???(as soon as the voltage is 1,256v)...anyway right now is a non sense for me because as soon as I increase voltage to 1,256v the card reaches max TDP limit and then it throtles...I would need to increase the TDP limit then...I have researched in the net but I cant find I CLEAR solution on how to increase the little 10% default...is there any "easy" way to do it??
It just means that you reached the point where no more increases are possible.
For increasing power limit further than is allowed by default a vbios mod is required that comes with a risk and voids warranty. If you are not familiar with vbios mods than there is no safe and easy way.

Interface Manager Material Transaction can not be activated

Hi hussein,
One of the interface managers for INVENTORY module can not be activated.
I tried to activated it using:
Navigation: INVENTORY > Setup >Transactions > Interface Managers > Material Transactions
Goto Tools > Launch Manager > Submit Conc. program "Process Transaction Inferface"
Then after the job is completed, I checked the manager but it is still "inactive" status. :(
Its log says:
+---------------------------------------------------------------------------+
Inventory: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
INCTCM module: Process transaction interface
+---------------------------------------------------------------------------+
Current system time is 07-DEC-2009 14:57:19
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
+------------- 1) PRINT -------------+
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed successfully
Current system time is 07-DEC-2009 14:57:21
+---------------------------------------------------------------------------+Please help.....
Thanks a lot
msk

Hi yxes;
Navigation: INVENTORY > Setup >Transactions > Interface Managers > Material Transactions
Goto Tools > Launch Manager > Submit Conc. program "Process Transaction Inferface" Related Cm is Up? If yes please follow below and see its helpful:
The print option has been disabled for this report.
Regard
Helios

BEA-000627 issue.. reached max pool capacity

I got this reached max pool capacity error msg shown below..
What is confusing to me is , how does the increment level become -ve... Shoudnt it be zero instead of -11 ?
<BEA-000627> <Reached maximum capacity of pool "aPool", making "-11" new resource instances instead of "5".>
Then a stack trace follows this error message saying
negativeArraySizeException, which is understandable becoz it is trying to increase the pool by -11.. The stack trace is shown below...
Has anyone seem anything like this ? Any thoughts ?
java.sql.SQLException: java.lang.NegativeArraySizeException
at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:209)
at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:316)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:333)

pc cp wrote:
I got this reached max pool capacity error msg shown below..
What is confusing to me is , how does the increment level become -ve... Shoudnt it be zero instead of -11 ?
<BEA-000627> <Reached maximum capacity of pool "aPool", making "-11" new resource instances instead of "5".>
Then a stack trace follows this error message saying
negativeArraySizeException, which is understandable becoz it is trying to increase the pool by -11.. The stack trace is shown below...
Has anyone seem anything like this ? Any thoughts ?
java.sql.SQLException: java.lang.NegativeArraySizeException
at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:209)
at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:316)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:333)Certainly it's a bug, and likely already fixed. What version of weblogic is this?
Joe

Cloud Membership has reached its limit for hosted sites.

I have a full subscriptin to the cloud but when I try to push my new Muse site live Iget the following error: "Your Adobe Creative Cloud Membership has reached its limit for hosted sites." After much research I have kind of figured out that when I upgraded my trial version of Muse only to a paid version of the Adobe Cloud, the system may think I am still a trial member. I sent in a ticket but three says later it's still not fixed. Anyone one else had this issue?

I have only ever used one email address. [email protected] I'm not sure why it would should that I have even used one site since I have never published a website live. I have only played around with 3 different sites... all of which should still be temporary. The site I am trying to push live right now is outsidetheveil.com.

I am trying to back up my Iphone 4s, I have reached my limit???

I am trying to back up my Iphone 4s, and this is my 5th laptop that I have owned since the first generation of Ipnone came out. it looks like that I have reached the max registrations, what should I do?

If you need to autorize a computer and you have reached the limit if 5, then deauthorize all. You can then authorize the active computers.

Twrtab reached memory limit

Hello all,
In upgrade to ERP 6.0, phase TP_ACTION_CP2STRIG, got the following error
4 ETW000 twrtab reached memory limit; memory usage 2000000000
4 ETW000   0 d /   3 i / 1497 u /   0 =   0% ucf USR12~
4 ETW690 COMMIT "5709000" "472939294"
Tried OSS note 103562 - specified TCS parameter 1Gb, 4Gb, and 5Gb without success. Updated diffrerent profiles \put\bin\TPPARAM, EXDBNEW, CP2SHDT and DEFAULT.
It seems that CP3SHDT is copied from somewhere, which does not contain the TCS parameter.
Would appeciate any help/input
Thanks,
Terry
R3trans.exe version 6.14 (release 700 - 14.05.08 - 17:05:00).
Edited by: Terry Kempis on Jun 19, 2008 8:35 AM

Hi Markus,
I checked the CP2SHDT.ELG (which is on earlier phase TP_ACTION_CP2STAB) and did not have that parameter and it completed succcesfully.
I only tried to add the TCS parameter while in the issue phase TP_ACTION_CP2STRIG (after getting this memory problem).
Below is the CP2SHDR.ELG (for phase TP_ACTION_CP2STRIG).
This SAPEBBX700.IP3 is the one it is trying to process.
Thanks,
Terry
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
COPY TO SHADOW and RETURN CODE in SAPEBBX700.IP3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETP195 log file is not complete ==> "R3trans" terminated for unknown reason
Long text:
    Cause
      When a program terminates, it usually leaves information that can be
      analyzed. This is not the case here. All that is known is that the
      program terminated and that the log is incomplete.
    System Response
    What to do
      The only thing known for sure is that the transport step was not
      completed and must be repeated.
2EETP200 Export with errors, request will not be imported
Long text:
    Cause
      The export was finished with errors or terminated (return code >= 8).
    System Response
      The request is not imported. Instead it is set back to "can be changed"
      in the source system.
    What to do
      The export log contains remarks concerning the reason for the incorrect
      export. Correct the error and repeat the export.

Can't reach max (also with fancontrol) and min fan speed manually

I'm using fancontrol to control my fan's speed. One thing I noticed is that maximum fan speed is never reached even when temperatures exceed max limit.
If I set max temperature in /etc/fancontrol to 55 and restart fancontrol, 55+°C will cause fan to speed only at ~5800 RPM. If I set min temperature to 60, fans will completely stop. 'pwm_enable' is set to 1 when fancontrol is running.
Now if I stop fancontrol, fan will speed up to ~6460 RPM while 'pwm' is at 255 and 'pwm_enable' changed to 0. I can't change 'pwm' value at this point. If 'pwm' gets set to 0, fan will completely stop.
At this point fancontrol is still not running. If I set 'pwm_enable' to 1 and leave 'pwm' at 255, fan will slow down to ~5800 RPM. If I set 'pwm' to 0, fan will not slow down completely, but will instead slow down to ~2080 RPM.
What's interesting is that although fancontrol can't reach max fan speed, it can stop fan completely, while I can do neither manually.
Any idea how to enable at least max fan speed for fancontrol?

I'm using fancontrol to control my fan's speed. One thing I noticed is that maximum fan speed is never reached even when temperatures exceed max limit.
If I set max temperature in /etc/fancontrol to 55 and restart fancontrol, 55+°C will cause fan to speed only at ~5800 RPM. If I set min temperature to 60, fans will completely stop. 'pwm_enable' is set to 1 when fancontrol is running.
Now if I stop fancontrol, fan will speed up to ~6460 RPM while 'pwm' is at 255 and 'pwm_enable' changed to 0. I can't change 'pwm' value at this point. If 'pwm' gets set to 0, fan will completely stop.
At this point fancontrol is still not running. If I set 'pwm_enable' to 1 and leave 'pwm' at 255, fan will slow down to ~5800 RPM. If I set 'pwm' to 0, fan will not slow down completely, but will instead slow down to ~2080 RPM.
What's interesting is that although fancontrol can't reach max fan speed, it can stop fan completely, while I can do neither manually.
Any idea how to enable at least max fan speed for fancontrol?

MTL MATERIAL TRANSACTION error 'CALL_TO_CONTRACTS'. Please help.

I am getting the following error from the MTL_TRANSACTIONS_INTERFACE table while running a material transaction.
You have encountered an unexpected error in 'CALL_TO_CONTRACTS': (No Data Found).
I know that there is an query not being properly fulfilled and it's giving me back this error.
Does anybody know the specific reason that this error happens?
I don't know how to track down where this query is. I'm trying to find the package that it is in.
Any help would be meet with much thanks.

I get this error too when trying to display a content area with a single URL element (displaying the CA as a portlet).
When the URL is set to open in a NEW window no error.
But if I select the URL item to open inside the folder (CA) I get the error.
Pls let me know if you find a solution since I would like to have my CA shown ONLY as a portlet and not as a new window....

HKONG: Material Transaction Interface 의 data를 처리 Process들에 대한 정의

PURPOSE
Material Transaction Interface 의 data를 처리 Process들에 대해 정의하고자 함.
Explanation
관련된 정보는 다음과 같습니다.
Material Transaction Interface 의 data를 처리하기 위해서는 다음의 2개의 Process가 수행됩니다.
- INCTCM (Process transaction Interface)
- INCTCW (Inventory transactions worker)
(1)
Records are processed into this table by the INCTCM - Process Transactions Interface from the Interface tables :
     MTL_TRANSACTIONS_INTERFACE     to MTL_MATERIAL_TRANSACTIONS_TEMP
     MTL_TRANSACTION_LOTS_INTERFACE     to MTL_TRANSACTION_LOTS_TEMP (Lot 사용시)
     MTL_SERIAL_NUMBERS_INTERFACE     to MTL_SERIAL_NUMBERS_TEMP (serial 사용시)
==> INCTCM 에 의해 interface table의 data가 validation후, temp table로 옮겨집니다.
(2)
After the records are processed from the MTL_TRANSACTIONS_INTERFACE into the MTL_MATERIAL_TRANSACTIONS_TEMP
by the INCTCM - Process Transactions Interface,
a worker will be launched to process the record from MTL_MATERIAL_TRANSACTIONS_TEMP into MTL_MATERIAL_TRANSACTIONS.
The worker is called INCTCW - Inventory Transaction Worker.
The INCTCM - Process Transactions Interface will launch a single INCTCW - Inventory Transaction Worker for all rows
that meet the criteria in MTL_MATERIAL_TRANSACTIONS_TEMP :
     TRANSACTION_MODE     = 3
     LOCK_FLAG          = N
     PROCESS_FLAG          = Y
Once the process is complete the records will be moved into the corresponding
transaction table :
     MTL_MATERIAL_TRANSACTIONS_TEMP     to MTL_MATERIAL_TRANSACTIONS
     MTL_TRANSACTION_LOTS_TEMP     to MTL_TRANSACTION_LOT_NUMBERS
     MTL_SERIAL_NUMBERS_TEMP          to MTL_UNIT_TRANSACTIONS
==> INCTCM은 INCTCW를 call하게 되고, 이 Process에 의해 TEMP table로부터 MMT table과 Inventory table에
DATA가 Insert됩니다.
The rows in mtl_transactions_interface are processed in 5 phases.
1. Derives dependant columns, eg:acct_period_id, primary_quantity etc..
2. Detailed validation performed on the records
3. On hand qty check for negative qty's etc..
4. Reservations Relieved if demand was created in order entry
5. Rows are moved to mtl_material_transactions_temp where the
transaction processor is called to process these rows and update the inventory levels etc..
Reference Documents
-------------------

Material Transaction and Move Transaction Managers are Going Inactive

hi
it was running previously but currently it becomes inactive.can any one tell in which table to look for the error related to this problem?
Kind Regards
Sayantan

Hi;
What is your OS and EBS?
It was working before? If yes what have you been changed on your system(patch etc)
Please check below note:
Material Transaction And Move Transaction Managers Are Going Inactive [ID 93507.1]
Material Transaction and Move Transaction Managers are Going Inactive [ID 98757.1]
Regard
Helios

Creative Cloud Membership has reached its limit for hosted sites

I have had a paid Adobe Muse Creative Cloud membership for about 2 years now, and only used one website. I understand I can host up to 5. But for some reason when I try to launch a new site, I am told my membership has reached its limit for hosted sites. Can someone please tell me if I have some test pages I'm hosting (or something) and how I can erase them so I can make room for my new site. These are only personal sites so I do not need a business catalyst url for testing. I have the two domains active now and just need to be able to have both go live.
My email is [email protected]
The web page I'm trying to launch is www.ninetiesband.com. The only site that should be active right now is www.wearenightsbridge.com.
Thank you for any help you can provide.
-Mickey

Hello Mickey,
I checked your subscription details, and it looks like you're subscribed to Adobe Muse single app subscription, and not Creative Cloud subscription. When you sign up for Muse single app subscription (yearly), you get one free site to host with Business Catalyst. You only get 5 sites when you have a full Creative cloud subscription.
Cheers
Parikshit

IB:How to update a serial Number which has Inventory Material Transactions?

Dear friends
first of all thanks for your time and valuable solutions
Install base: How to update a serial Number which has Inventory Material Transactions
problem description:
Install base > quick search
Here is Installbase record, when I query from quick search
Rec#     Item          Item Instance           Serial Number          Status
1     300-7000-01      3000000           1000XXX-0538JQ0003 Return for Adv Exchange
2     300-7000-01     8000000               1000XXX-0538JQ0003-     Return for Adv Exchange
3     300-7000-01     5000000               1000XXX-0538JQ0003-A     Return for Adv Exchange
looking above data, first and third records are the legitimate serial numbers(correct according to the client specs), second record is not legitimate since it has a dash as suffix, we found there are many illegitimate serial Numbers exists, needs to be updated with the right serial Numbers which I analyzed in excel after pulling data from mtl_material_transactions , oe_order_lines_all , mtl_serial_numbers , mtl_system_items_b
basically these are all RMAs
I need to update the second record as 1094SUZ-0538JQ0003-B as per the guidelines, while updating I need to keep all the existing contracts, Warranty, what ever material transations it has, need to be same.
we have a package updating the serial numbers using IB API (csi_Item_Instance_Pub.update_item_instance) but it is updating only the records which has no serial numbers present for that instance, if there is a serial number already exists it is not working.
user define error msg "Serial Number 1094SUZ-0538JQ0003- has Inventory Material Transactions. This serial number cannot be used to update an existing Item Instance", but I need to update this anyway!! or am I missing something here, please advice me
below post looks like similar issue, talks about hard update, I have no clue, by doing that the updated serial number will have same transations, contracts, dates....attached to it like the previous serial number
IB UPDATE_ITEM_INSTANCE ERROR - doesn't allow ACTIVE_START_DATE to change
would be great If you guys help me out, really appreciated!!
unfortunately I couldn't find any solutoin in metalink for the existing serial number update
code for updating the serial number using IB API
          x_msg_count := 0;
x_msg_data := '';
p_instance_rec.instance_id := rec.child_instance_id;
p_instance_rec.serial_number := rec.child_serial_number;
p_instance_rec.object_version_number := rec.child_object_number;
p_txn_rec.transaction_id := Fnd_Api.g_miss_num;
p_txn_rec.transaction_date := SYSDATE;
p_txn_rec.source_transaction_date := SYSDATE;
p_txn_rec.transaction_type_id := 1;
csi_Item_Instance_Pub.update_item_instance
p_api_version => 1.0,
p_commit => Fnd_Api.g_false,
p_init_msg_list => Fnd_Api.g_false,
p_validation_level => 1,
p_instance_rec => p_instance_rec,
p_ext_attrib_values_tbl => p_ext_attrib_values_tbl,
p_party_tbl => p_party_tbl,
p_account_tbl => p_account_tbl,
p_pricing_attrib_tbl => p_pricing_attrib_tbl,
p_org_assignments_tbl => p_org_assignments_tbl,
p_asset_assignment_tbl => p_asset_assignment_tbl,
p_txn_rec => p_txn_rec,
x_instance_id_lst => x_instance_id_lst,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data
Thanks
Suri

Suri
Used this. May not be perfect but should get you there. Only if the table is registered (all the seeded tables should be registered) this will work.
select distinct a.table_name,b.column_name from fnd_tables a, fnd_columns b
where a.table_id=b.table_id
and upper(b.column_name) like '%SERIAL%'
Also this is very old one but if you need history for this change add the history insert logic as well..
DECLARE
l_return_err VARCHAR2 (80);
PROCEDURE debug (p_message IN VARCHAR2)
IS
BEGIN
dbms_output.put_line (SUBSTR (p_message, 1, 255));
END debug;
BEGIN
debug('======================================================================');
debug('Switching from serial number XDT07406. to XDT07406 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'XDT07406'
WHERE serial_num = 'XDT07406.';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'XDT07406'
WHERE new_serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
UPDATE wsh_delivery_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in wsh_delivery_details updated :'||sql%rowcount);
debug('======================================================================');
debug('Switching from serial number jct20591 to JCT20591 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'JCT20591'
WHERE serial_num = 'jct20591';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'JCT20591'
WHERE new_serial_number = 'jct20591';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_return_err :='Updating in one of the script has this error:'|| substrb(sqlerrm, 1, 55);
debug('Value of l_return_err='||l_return_err);
END;
Thanks
Nagamohan

Material Transaction sequence reached max limit in Version 11.0.3

Similar Messages

Maybe you are looking for