I send a cookie to the server, but it doesn't come back.

Hey all:
I'm attemping send a cookie via an application to the servlet, and then pull that cookie back out from the servlet's response. I want to do this whole process repeatedly while retaining the same cookie.
Pulling the cookie out on the first request to the servlet works fine because I do not send a cookie to the servlet, and the servlet instantiates a new session. Next, the cookie is sent back to the servlet successfully because it is printed out on the server-side exactly as it appeared on the client side. However, after the servlet responds to that second request and on subsequent requests, I can not pull the cookie out again. On the method call, connection.getHeaderField("Set-Cookie"), the result is null. I've even inspected the connection object, and it seems empty of any cookies whatsoever. Why doesn't the cookie come back on requests after the initial request? Is there anything I can do to make it come back?
Thanks a ton in advance. Have great day!!!

you must check that cookie's path set by Tomcat is the one expected by your browser. Otherwise the former won't send it back to the server. I had the same problem because Tomcat sets the cookie path to "/webAppName" and the browser expected it to be "/".

Similar Messages

My cousin told me there was a way to get free apps and that he could do it but what he really did was try to refund all my apps, the apps are gone from the history but no money has come back for me to even get the apps back, please help.

My cousin told me there was a way to get free apps and that he could do it but what he really did was try to refund all my apps, the apps are gone from the history but no money has come back for me to even get the apps back, is this permanent?

Yup!!
Got what you deserved!
Do not try and rip off or steal from people or companies.
You have good cousin, there!(sarcasm)

HT1430 Email was rejected by the server because it doesn't allow relaying?

Why would my email that I am trying to send be rejected by the server because it doesn't allow relaying? What does that mean in English?

It means your email account doesn't have an authenticated SMTP server, which means it does not require a user name and password to send email with the account.
Most, if not all internet service providers block the use of SMTP servers that are outside of their network or not provied by the ISP being used at the time unless the SMTP server is authenticated.
Who is the email account provider?

Problem in sending HTTP request to the server.

Hi,
i dveloped an ant script for sar deployment.
i deployed a sar to my local soa server with ant script. it got deployed succesfully..
but when i try to deploy to a remote server, getting the below error..
"Problem in sending HTTP request to the server. Please make sure the server is up and/or check standard HTTP response code for 404"
but the server is up and runnig and i am able to ping it from my machine and also access the console...
below is my script
build.properties
wn.bea.home=C:/Oracle/Middleware
all.needed.jars.path=D:/SourceCode/neededJAR
oracle.soa.home=C:/Oracle/Middleware/Oracle_SOA1
java.passed.home=C:/Oracle/Middleware/jdk160_24
#Deployment environment
deployment.plan.environment=DEV
#Deploy Action
deployAction =redeploy
#credentials
user=weblogic
password=welcome1
#For Composite deployment
serverURL=http://10.177.154.6:7001
forceDefault=true
server=10.177.154.6
port=7001
sarLocation=D:/SourceCode/JAR
build.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="soaDeployAll" default="deployAll">
     <echo>basedir ${basedir}</echo>
     <property environment="env"/>
<echo>current folder ${basedir}</echo>
     <property file="${basedir}/build.properties"/>
     <taskdef resource="net/sf/antcontrib/antlib.xml">
     <classpath>
          <pathelement location="${all.needed.jars.path}/ant-contrib.jar"/>
     </classpath>
     </taskdef>
     <target name="init">
          <tstamp>
               <format property="timestamp" pattern="yyyy-MM-dd_HH-mm-ss"/>
          </tstamp>
          <property name="build.log.dir" location="${basedir}/buildlogs"/>
          <mkdir dir="${build.log.dir}"/> <property name="build.log.filename" value="build_${timestamp}.log"/>
          <record name="${build.log.dir}/${build.log.filename}" loglevel="verbose" append="false"/>
          <echo message="Build logged to ${build.log.filename}"/>
     </target>
     <target name="deployAll" depends="init">
     <echo>Deploy for environment ${deployment.plan.environment}</echo>
     <antcall target="deployAllComposites"/>
</target>

     <target name="deployAllComposites" depends="init">
     <foreach target="deployComposites" param="Files">
          <fileset dir="${sarLocation}" casesensitive="no" includes="*.jar"/>
     </foreach>
     </target>
     <target name="deployComposites" depends="init">
     <basename file="${Files}" property="basename"/>
<echo>Deploy Project ${basename} for environment ${deployment.plan.environment}</echo>
          <if>
               <equals arg1="${deployAction}" arg2="deploy" />
               <then>
                    <echo message="Deploying composites in Managed server........." />
                    <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
                         <property name="serverURL" value="${serverURL}"/>
                         <property name="user" value="${user}"/>
                         <property name="password" value="${password}"/>
                         <property name="overwrite" value="false"/>
                         <property name="forceDefault" value="${forceDefault}"/>
                         <property name="sarLocation" value="${sarLocation}/${basename}"/>
                    </ant>
               </then>
               <else>
                    <echo message="ReDeploying composites in Managed server........." />
                    <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
                         <property name="serverURL" value="${serverURL}"/>
                         <property name="user" value="${user}"/>
                         <property name="password" value="${password}"/>
                         <property name="overwrite" value="true"/>
                         <property name="forceDefault" value="${forceDefault}"/>
                         <property name="sarLocation" value="${sarLocation}/${basename}"/>
                    </ant>
               </else>
          </if>
</target>
</project>
please help....

Hi,
Give the serverURL as http://<host>:<managed.server.port>/soa-infra/deployer and try.
e.g . http://10.177.154.6:8001/soa-infra/deployer
Regards,
Neeraj Sehgal

Same command works on the server but not on the workstation

Scenario
Exchange 2010 sp3
Name Value
CLRVersion 2.0.50727.4984
BuildVersion 6.1.7600.16385
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
Worstation:
Name Value
PSVersion 4.0
WSManStackVersion 3.0
SerializationVersion 1.1.0.1
CLRVersion 4.0.30319.18063
BuildVersion 6.3.9600.16406
PSCompatibleVersions {1.0, 2.0, 3.0, 4.0}
PSRemotingProtocolVersion 2.2
I input a command from my workstation using ISE
get-exchangeserver | Where-Object {$_.IshubtransportServer -eq $True} | Get-MessageTrackingLog -Start (get-date).AddHours(-2) -Sender '[email protected]'
Error:
The input object cannot be bound to any parameters for the command either because the command does not take pipeline input or the input and its properties do not match any of the
parameters that take pipeline input.
The Exact same command from the Server works.
In my profile I have the following:
set-Location c:\
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'http://MyExchangeServer/powershell'
import-pssession $Session
Import-Module ActiveDirectory
$host.PrivateData.ErrorForegroundColor = 'green'
Clear-Host
From My Workstation:
PS C:\> Get-PSSession
Id Name ComputerName State ConfigurationName Availability
1 Session1 MyExchangeServer Opened Microsoft.Exchange Available
Why does the command work on the server but not on the workstation?
Alexis

Hi Tiri2014,
There are some differences between Remote PowerShell and Exchange Management Shell. You cannot use the pipeline when you run some cmdlets by using Remote PowerShell.
Here’s a link to similar case for your reference:
Error message when you try to pipe the result of a cmdlet into another cmdlet by using Remote Powershell in Office 365 dedicated: “The input object cannot be bound to any parameters
for the command”
http://support.microsoft.com/kb/2701827/en-us
Hope it helps
Best regards

I need to reset my security questions but when I send an email to the rescue email it doesn't get to me its the wrong email. help?

iTunes wont let me download any music and I have over $20 on my account. It says I need to answer my security questions but I don't know the answers. When I try to send an email to the rescue email, it doesn't work. It says the email starts with an "h" but none of my emails start with an "h". I also don't know how to edit the email. Someone please help!

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(111154)

So, I made my account a while ago before I had an iPhone so I can get music. The result of that I can't remember my security questions, and it tells me to send a rescue email an alert, but it doesn't show you how to get to that page. Can someone help me?

So, I made my account a while ago before I had an iPhone so I can get music. The result of that I can't remember my security questions, and it tells me to send a rescue email an alert, but it doesn't show you how to get to that page. I am getting quite annoyed because apples hours arent the best fitted to my scedule since I have school and work, so I cant call and ask how to get fixed. Please help me all I want to do is buy some music...

Click here and fill out the form.
(90729)

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

Mails phisically in the server but not appearing in webmail and reconstruct

Hello:
Solaris 10 8/07 s10x_u4wos_12b X86
Sun Java System Messaging Server 6.3
The user deleted every single mail from his mailboxes via webmail. Every folder appeared empty in the webmail, the inbox, recycle bean, sent mails... all of them (I checked it). However, it stated that the quota usage was 50%. That was because in the server there were 50 MB of .msg files, and the user's quota is 100 MB. I don't know why happened that, as far as I know, if the .msg files were expunged messages, they shouldn't count for the quota usage, is that right?
Anyway, I removed the messages using rm, then imexpire and reconstruct -r user/username/INBOX. I sent two emails to the user with attached files, they were correctly received and the quota usage changed right (files size was 2 MB, so quota usage was 2%). I deleted the messages via webmail, I was able to see them in the server but did not appeared via webmail, and the quota was right, so everything seemed to be OK.
The weird thing is:
root@machine # reconstruct -n user/username/INBOX
user/username/INBOX
ERROR: Inconsistent information: 0 idx records 2 messages 3 expunged
So, I run reconstruct -n user/username/INBOX, it finds the problem, it shows something like "reconstructing: OK", but if I run the reconstruct -n again, it still show the "Inconsistent information" error. ¿? What am I missing?
Any help would be really appreciated. Thank you very much, and I apologize for my poor English.

Sorry for the incomplete info:
shjorth wrote:
Deprecated wrote:
Sun Java System Messaging Server 6.3What is the exact version (./imsimta version)?
The user deleted every single mail from his mailboxes via webmail.Which webmail? UWC/CE or Messenger Express?
Sun Java(tm) System Messaging Server 6.3-6.03 (built Mar 14 2008; 32bit)
libimta.so 6.3-6.03 (built 17:07:13, Mar 14 2008; 32bit)
SunOS mail1 5.10 Generic_137112-03 i86pc i386 i86pc
Webmail is UWC.
Every folder appeared empty in the webmail, the inbox, recycle bean, sent mails... all of them (I checked it). However, it stated that the quota usage was 50%.Where did it state the usage was 50% -- it may be you were seeing an old cached value?
Did you verify this output with the output of mboxutil/imquotacheck for the account?
The 50% quota usage was reported in UWC and also in the output of mboxutil.
That was because in the server there were 50 MB of .msg files, and the user's quota is 100 MB. I don't know why happened that, as far as I know, if the .msg files were expunged messages, they shouldn't count for the quota usage, is that right?The ".msg" files are not removed from disk until the next imexpire run. If a message is expunged it won't count towards quota usage.
Right, because of that I don't understand why there were ".msg" files in the disk that were not displayed in UWC, as they were expunged, but they did count towards quota usage.
Anyway, I removed the messages using rm, then imexpire and reconstruct -r user/username/INBOX. I sent two emails to the user with attached files, they were correctly received and the quota usage changed right (files size was 2 MB, so quota usage was 2%). I deleted the messages via webmail, I was able to see them in the server but did not appeared via webmail, and the quota was right, so everything seemed to be OK.
The weird thing is:
root@machine # reconstruct -n user/username/INBOX
user/username/INBOX
ERROR: Inconsistent information: 0 idx records 2 messages 3 expunged
So, I run reconstruct -n user/username/INBOX, it finds the problem, it shows something like "reconstructing: OK", but if I run the reconstruct -n again, it still show the "Inconsistent information" error. ¿? What am I missing?
-n : report basic errors found but try not to rebuild most folder files if possible
(This may be used to catch errors before repair so they may be studied)If you run "reconstruct user/username/INBOX" was the mailbox fixed?Well, the mailbox is working fin, but I think that there's something that I'm misunderstanding. I'm really newbie in SJS Messaging Server. The -n flag is for report errors only, without performing any repair, isn't it?
http://docs.sun.com/app/docs/doc/819-4429/acmeb?a=view :
Checks the message store only, without performing a fix on the mailbox or mailboxesCommand help:
-n : report only, no repairAnd the -r is for recursively repaire the mailbox, right? So, if I run the reconstruct -n and it found a problem, then I run the reconstruct -r and it said that the reconstruction was OK... When I run the reconstruct -n again, why did it find an inconsistency again? I don't get it.
Anyway, I don't see that problem now:
root@machine # reconstruct -n user/username/INBOX
username/INBOX
>
Regards,
Shane.Thank you for your kind help.

Folio is uploaded in the server but I cannot see it in my Adobe Viewer

My folio is uploaded in the server but I cannot see it in my Adobe Viewer in my iPad, any idea guys how to be able to see it in my Viewer?
Thanks.

There are some bugs that can cause this issue. If you are adding long, smooth scrolling pages (ie 1024x3000) and performing a "New" to add the page from the Folio Builder Panel versus using the "Import" command, this issue can be caused.
As the previous posted said, you need to either have all horizontal, all vertical, or all horizontal and all vertical pages. You cannot have a mix of both. If there is a fundamental error with your folio, it iwll not be available in the viewer.

I keep trying to send emails and it says its rejected by the server because it doesn't allow relaying... Any ideas how to fix?

I keep trying to send emails and it says its rejected by the server because it doesn't allow relaying... Any ideas how to fix?

There is something else that can cause this issue. Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Just got Mac book pro. I can't connect to office remotely thru the remote window. My office is window based and I have no problem connecting while at the office thru the server but cannot at home. Any help would be appreciated!

Just got Mac book pro. I can't connect to office remotely thru the remote window. My office is window based and I have no problem connecting while at the office thru the server but cannot at home. Any help would be appreciated!

This what my IT replied with:
That teh MacBook cannot connect with RWW because it requires Active-X to connect. That MAc browsers (Safari) do not use Active-X but only Windows (IE) uses Active-X control.
It would seem to me that there must be a way around this. Any help?
Thanks,

AOL email cannot send PASSWORD securely to the server???

Hi, When I set up any aol account in mail, and click create, it always comes up with cannot send password securely to the server. This problem happened right after updating to snow leopard. Any one else have the same problem? Any solutions? Thanks.

For years and years most email servers accepted connections that were insecure, meaning that passwords were transmitted in plain text, and the email messages came back as plain text as well.
Now many servers encourage the use of SSL connections, which encrypts the data in both directions. Mail is trying to warn you that the SSL connection cannot be established, and therefore your data could be intercepted in transmission.
AOL's website (http://about.aol.com/faq/openmailaccess) states that they do not support SSL connections, therefore your only method of accessing your email is to use an unsecure connection.
Alternatively you could go to AOL.com (not use Mail.app) and read your email here as this will establish a secure HTTPS connection.
The best solution though is to stop using AOL and get either a MobileMe or a gmail account.
Regards,
-Ryan

I changed my username on Apple, but it doesn't come up on my ipad. The old username comes up, and I can't access itune or icloud. How do I fix this?

I changed my username on Apple, but it doesn't come up on my ipad. The old username comes up, and I can't access itune or icloud. How do I fix this?

Hello there, Confused Apples.
The following Knowledge Base article offers some step-by-step instruction for changing the email for your Apple ID:
Change your Apple ID - Apple Support
Sign out of iCloud, the iTunes Store, App Store, FaceTime, Find My Friends, Find My iPhone, and iMessage on each device that uses your current Apple ID for these services.
Go to My Apple ID.
Select Manage your Apple ID and sign in. Forgot your password?
Select Edit next to Apple ID and Primary Email Address.
Enter the email address that you want to use as your Apple ID, then select Save Changes. Apple will send a verification email to that address.
Open the email from Apple, then click Verify Now. Didn't receive the email?
When the My Apple ID page opens, sign in with your new Apple ID email address and password. When you see a message that verification is complete, you can start using your updated Apple ID.
Remember to update the features and services that you use with Apple ID.
Learn how to use and manage your Apple ID.
Additionally, this article is helpful with what to do, after you've changed your Apple ID:
Apple ID: What to do after you change your Apple ID - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

TS1398 I can see the public network and it show the the conected bars at the top, but it doesn't prompt me to the main page to log in

I can see the public network and it show the the conected bars at the top, but it doesn't prompt me to the main page to log in

I tried that, I am staying at a hotel and it shows the network and it shows the conectivity bar at the top, generally it sends me to the main wifi page and asks me to type a password... but it doesn't even send me to that page at all, I did a network reset and still not working

I send a cookie to the server, but it doesn't come back.

Similar Messages

Maybe you are looking for