I sent my ipod nanooff and i have not recieved it back how do i find out where it is?, I sent my ipod nanooff and i have not recieved it back how do i find out where it is?

I sent my iPod nano 1st generation off for the iPod nano recall ststem. However I have not yet recieved my new iPod nano or an e-mial to confirm arrival or to help me understand where it is. How do i find out where it is? Or if it is ever liable for the recall process?

Solution may be found if you search in the "More Like This" section over in the right column.

Similar Messages

  • I have an iBook G4 running on OS X 10.4.11 and I just got a new ipod and can't figure out how to get it updated to be able to sync my ipod PLEASE HELP

    I have an iBook G4 running on OS X 10.4.11 and I just got a new ipod and can't figure out how to get it updated to be able to sync my ipod PLEASE HELP

    You could go hunting for a fair price on a refurbished or restored Intel-based Mac or MacBook, as most early models of CoreDuo and Core2Duo can run Snow Leopard 10.6.8, and some much more recent.
    The Apple Store's Special Deals section that is online has some fairly recent examples of hardware with an OS, original accessories as noted, power cord, and complementary one year coverage. Eligibility for extended AppleCare plans are noted & may be available for various items in the store. Subject to availability. Refurbished. Like new. The price difference can be about the same as the additional two year AppleCare plan may cost, so get that too.
    Third party repaired restored or available through other channels vary in quality, quantity, condition, and may be lacking in some or most original accessories; they should include basic hardware as originally equipped and have the boot-install software disc set as intended for that build model & year specification, included.
    Auction sites rarely have that much of a kit together, w/ missing discs, scruffy, extra fees, etc. On the other hand, companies that restore and repair Macs for a living and are authorized Apple service centers may have something, if you aren't in the market for something holiday new or really quick. Older models if reasonably refurbished can still shine years later.
    Hopefully this helps somewhat.
    Good luck & happy computing!

  • How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you

    How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you

    https://discussions.apple.com/message/11994130#11994130

  • TS3694 When updating my Ipad right near the completion of the process i get the error #6 when i clicked onto this to find out what to do it sent me to -48 or 20000 - 200008 and a few more ?  What should I do ? How do I know which one to do ?

    When updating my Ipad 2  right near the completion of the porcess it gave me an error #6  not sure what to do .  I made sure i was update in I tunes before I started process ?  need some assistance ?

    What iOS is on your iPad?
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    From above link:
    Error 2, 4 (or -4), 6, 1000, 9006            
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Therefore - disable your firewall and anitvirus software temporarily.
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    To update the iOS - If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    To update your iOS - If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • My start up disk is almost full, but I have deleted everything I can find - I think that when I upgraded my software it has saved the old one - anyone know how I can find and delete it?

    Hi All,
    Late last year I upgraded from tiger to leopard (very out of date I know) but ever since I have been getting warnings that my startup disk is full.  I have deleted loads including pictures and itunes but still get the same mesage.  I think when I upgraded the old version was stored somewhere and this might be causing the problem.  Does anyone know where I would be able to find and delete - or alternatively have any other suggestions for what the problem may be?
    Many thanks

    WOW
    80GB is a very small drive. 
    Sorry Noondaywitch, but omni disk sweeper isn't going to install in the space remaining, without more problems. 
    My Suggestions
    1.  Get a large (400GB+) USB hard drive
    2.  Copy all the contents of your home directory to the USB drive.
    3.  Delete all your files from your home directory on your computer after making sure everything transferred ok.
    4.  Perform a clean (destructive) install of Mac OSX and then the applications you need.
    5.  Check how much space you have left.
    6.  If there is less than 50% of the HDD space left (35GB or so), then consider replacing the HDD with a new larger one.  If it's a white intel mac book, then this is very easy, and instructions how to do it are included in your 'everything else' wallet with your OSX DVDs etc.
    7.  If you can't replace the HDD, then it's time to consider a new machine i'm afraid.
    Hope this helps
    Justin

  • TS3376 How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

    How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

    iPods (except for iPod touch) are not linked to any iTunes "account."  They are associated with your iTunes library. The account in iTunes is your Apple ID, and that is used to buy and download content from the iTunes Store.  It is not required to use an iPod.
    The 1st (and 2nd) gen shuffle can only be used with one iTunes library at a time.  When you connect it, iTunes should prompt you to start using it with your iTunes library, and warn that the shuffle's existing content will be erased.  Have iTunes erase the shuffle, and it will be associated with your iTunes library going forward.  You can then add content to your shuffle.
    The need for the previous owner's Apple ID and password should only come up if you are trying to transfer existing content from the shuffle to your iTunes library, AND the previous owner had content purchased from the iTunes Store.  Just cancel out of that step, if iTunes asks.

  • I have an Iphone 3Gs. I need to get contents of messages that were sent and received on the phone in June for evidence in court. I read online that the Iphone internal storage keeps all data done on phone in the storage. How do I get into it?

    I have an Iphone 36s. I need to get contents of messages that were sent on the phone in June of this year. I read online that the phone has an internal storage that keeps all data when phone is used and that this internal storage can be accessed. I need the contents of particular messages for evidence in court. How do I get into the internal storage? I've tried some of the methods that people post online, but none of them have been successful. Help!

    If you still have a backup from that point in time as part ofr your computer backup history, you could restore the backup folder, restore the phone from that backup and have the messages on the phone.
    More details about restoring from old backups can be found here: iPhone and iPod touch: About backups

  • My ipod 4th gen gets wiped clean of music anytime I sync. it then only redownloads some of the music in the library and wont upload missing songs.  They show on the ipod grayed out. How do I get this to stop? re-uploading takes 4 hours.

    my ipod 4th gen gets wiped clean of music anytime I sync. it then only redownloads some of the music in the library and wont upload missing songs.  They show on the ipod grayed out. How do I get this to stop? re-uploading takes 4 hours and is never completed.  I only get some of the 6000+ songs I have. This started when I updated to IOS5 i think.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications.  I even tryied going into itunes that is installed on my phone.  I still cannot find anyplace to manage these popups.  I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either.  Any guidance is MUCH appreciated - Im not sure where to go from here.

  • I just bought an ipod nano and cannot figure out how to sync the music from itunes onto it. i go to itunes and nothing happens. Is there a sync button im not seeing? I get my playlisits but that is it.

    just bought an ipod nano and cannot figure out how to sync the music from itunes onto it. i go to itunes and nothing happens. Is there a sync button im not seeing? I get my playlisits but that is it.
    ALSO does anyone know how to have 2 ipods on 1 computer but seperate?

    Hi there,
    I would recommend taking a look at the information found in the articles below. The first two articles have the same content, but are geared towards either OS X or Windows.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12113
    How to use multiple iPhone, iPad, or iPod devices with one computer
    http://support.apple.com/kb/ht1495
    -Griff W.

  • Hi I have recently had my computer reset and now can't find my original playlist on itunes for my ipod how can I find this or how can I put my music from my ipod onto itunes

    Hi I have recently had my computer reset and now can't find my original playlist on itunes, how can I transfer it from my ipod into itunes, or how can I find the original one?

    Expanding on what The Fiend said, the license to play music from a CD is tied to and stays with the CD. So if you sell or give away the CDs, the license to play the music goes with them, at which point you legally no longer have the right to the tracks. You need to keep the CDs if you want to keep the music.
    As for transferring the tracks from your iPhone back to your computer so you don't have to re-import all your CDs, check out this post from Zevoneer for some iPod/iPhone media recovery options:
    http://discussions.apple.com/thread.jspa?messageID=10570955#10570955
    Regards.

  • When I go to update and it gets to the backup part it gives me error -43 and says to complete it it will take all the stuff off my iPod how do I get it to update with out loosing everything on my 64 gb iPod touch

    When I go to update and it gets to the backup part it gives me error -43 and says to complete it it will take all the stuff off my iPod how do I get it to update with out loosing everything on my 64 gb iPod touch

    You have a 1st generation iPod Touch.
    It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • Using Gmail in iPhoto and cannot find any of my groups to email.  I have at least seven or eight groups that I email, each containing over 50 addresses. Is there a way to locate my email groups using iPhoto to send out mail in Gmail? Using version 9.5.1

    Using Gmail in iPhoto and cannot find any of my groups to email.  I have at least seven or eight groups that I email, each containing over 50 addresses. Is there a way to locate my email groups using iPhoto to send out mail in Gmail? Using version 9.5.1  (902.17) OS is Mavericks 10.9.1.

    Your question and description is not very clear to me, so hopefully something here will help:
    1. Gmail is a service not an app or a place. So you need to access the service with an app - that can be iPhoto, Mail, Outlook or any other mail client, or even a Web Browser like Safari or Firefox.
    So you can't "go to GMail" as you write, but instead you go to an application set up to use the GMail service.
    2. iPhoto is not a mail client. It's a handy way to email pics to Grandma, but for what you're doing you need to use an app that supports all of the Gmail service. iPhoto doesn't. There is no way around that.
    3. How to send to groups will vary depending on what app you use to access the GMail service. All of these apps can receive photos from iPhoto, either - as in the case of Mail and Outlook, via the Share function - or, in the case of all the rest - via a Media Browser.
    For help sending to Groups using any of these other apps you need to ask omn their respective forums. But the workflow is quite simple:
    Using Mail or Outlook set in the iPhoto Prefereneces:
    1. Select the pic(s) you want to share.
    2. Choose email from the Share function
    3. Make your selections re size etc
    4. The email opens up in Mail or Outlook
    - from there you need to figure out how to use the email client.
    Using any other app:
    1. In the mail app create a new email
    2. Click on the Attach button or link
    3. Use the Media browser to select the pic(s) you want to send
    4. Attach them
    - from there you need to figure out how to use the email client.
    For help accessing your photos in iPhoto see this user tip:
    https://discussions.apple.com/docs/DOC-4491

  • How do I find out if I can download music from South Africa? iTunes does not have a Music or Video department on my screen

    How do I find out if I can download music in South Africa.  iTunes does not have a logo for Music or Video when I open it - oly for App store, Podcast and iTunesU.  I am doing something wrong?

    Call Apple and ask them - International Support Phone #s

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

Maybe you are looking for

  • Calculation of depreciation and interest for a particular asset class

    Hi, I have a problem with the calculation of depreciation and interest for a particular asset class. The assets are financial leases. The depreciation key defined is LEAS. The following are the attributes of this key: Dep/int             phase     ba

  • NVidia Drivers for F10-100

    Can anyone tell me if its possible to update the nvidia drivers for the above model beyond that which is currently listed in the toshiba updates section. Those drivers are quite old now, and I tried downloading the MCE specific drivers from nvidia, b

  • Text on Path (k)

    Is there way in Flash to put text on a path. So that text flows around a circle? I imported a PNG that had text around a circle and it popped it back to horizontal. I converted the text to outlines in Fireworks to overcome this, but was hoping there

  • Can you add bullets.

    Okay I am working on a web page for fbla. And i have a scrolling dynamic text box can i add bullets to the text and if so how.

  • Date comparison in UNIX

    Hi All, Can some one please suggest me, how to compare the date in unix. I'm using below command but its not comparing the dates correctly bankdate=25-JUL-2009 start_date=01-JUL-2009 end_date=31-JUL-2009 echo bankdate="${bankdate}" echo start_date="$