How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you

https://discussions.apple.com/message/11994130#11994130

Similar Messages

HT201317 New phone: lost old phone in a fire. How can I access my photos on iCloud from my old phone? In settings I see the storage for BOTH phones. They are separate but same account. Can I access iCloud through PC or is the info now useless since phone

New phone: lost old phone in a fire. How can I access my photos on iCloud from my old phone? In settings I see the storage for BOTH phones. They are separate but same account. Can I access iCloud through PC or is the info now useless since phone is gone?

What a crappy design. This is where Android is so much better. It seems to me like you have no control over your iPhone. It does whatever Apple has designed it to do without asking you first. On Android you can actually go in see all folders, document files, photo files etc and you have so much more control of everything. Apple s..cks!

How can I manage several ID on my computer, one for my iPhone and another one for the iPad of the family?

Hi everybody
Just have bought an ipad2 and i would like to manage several IDs on my computer (i.e keep my iPhone ID and create another one for the ipad to manage apps for my iPhone (4) and the apps for the iPad).
How can I resetup the iPad to create that new ID on itunes?
Thanks for your help
Jp

If you have separate iTunes accounts for the two devices then you'll need to buy 2 copies of any app that you want on both device - you can't copy or move apps from one account to another (they are tied to the account that bought/downloaded them). If you want to reset the iPad then logout of the account on it (Settings > Store and tap the id on the right-hand side) and then Settings > General > Reset > Erase All Content And Settings will reset it back to factory defaults.
You may want to consider one of three options mentioned on this page http://support.apple.com/kb/HT1495

How can I attach a photo from iPhoto to mail as a file and not just put it on the email itself?

How can I attach a photo from iPhoto to mail as a file and not just put it on the email itself?

Souvent eu ce problème,
Je cree un dossier sur le bureau et glisse les photos à partir d'Iphoto dans ce dossier. Ce geste a pour effet de creer des copies dans le dossier.
Il ne reste plus qu'à selectionner ces photos pour les envoyer en pièces jointes.

HT1338 How can i use my data on windows or mac when i use one of them in the same time?

Hi,
i have a Mac book with 2 operating system, ( Windows& mac). How can i use my data on windows or mac when i use one of them in the same time?
Thank you

The following article(s) may help you.
Resolving duplicate calendars
Resolving duplicate contacts

I own Windows Photoshop CS and I am now working on a Mac can I upgrade from CS Windows to CS6 Mac? or do I have to purchase the full version?

I own Windows Photoshop CS and I am now working on a Mac can I upgrade from CS Windows to CS6 Mac? or do I have to purchase the full version?

BleuStarz wrote:
So, just so I have this straight; would CS upgrade to CS5 or did you mean I would have to purchase CS5 to upgrade to CS6? And If so, does CS upgrade any further? i.e. CS 3 or 4? Thanks for your reply --
CS will not upgrade to CS5. Historically, only CS2-CS4 ever qualified for upgrade to CS5. Those versions are all long superseded and no longer available from Adobe.
Adobe currently only sells CS6 (for outright purchase) and the Cloud (by subscription only). Cloud members have access to both CS6 and CC.
The only way to upgrade to CS6 is from CS5. Adobe no longer sells CS5. Unless you purchase the full version of CS5 from elsewhere (I don't see any point in that in this case) you would not be able to upgrade to CS6. You'd have to buy the full version of CS6. Or subscribe to one of the Cloud plans. PS+LR is an excellent deal if you use those products.

How can I search for a specific folder when filing an email message?

Dear all, first of all thanks for your support.
Please don’t hit me but I am currently a BlackBerry user, since this is the standard I got from the company I work for.
That said, new server technologies allows now to use also other devices with the same company server, something that gives me the chance to switch to an iPhone.
Basically it’s all ready for the switch, but just one thing holds me from making the step.
It’s the email messages filing procedure.
With the iPhone, assuming I am not missing something (something that I hope), when you want to file an email in one of your folders you select the “file” function and then you scroll with your finger across the folders list you have in your email account.
This is all right if you have an handful of folders, but if you have hundreds, if not thousands, of folders it will take forever to find the one you’re looking for.
With a BlackBerry, once you selected the email messages you’d like to file, and after you selected the “file” function, you can also scroll, but – very important for me – I can also start typing the initial letters of the folder I’m looking for. The more I type the less folders will appear, as less folders will match with letters I typed. Once the list is short enough to easily see the folder you want (usually after you typed two or three letters, which takes no more than a second), you can pick the folder you wanted in a blink of an eye.
This makes email messages filing a very fast operation, and since I use this for my job I can’t live without email filing.
If someone of you knows how to perform the same with an iPhone, and possibly with the original apple mail software, I will very glad to make the switch.
Thanks to all that will offer their support.
Regards.
Ugo
Italy

type it in the big box on the toolbar and press enter.

In Yosemite 10.2.2 Mail, I can no longer get to nested mailboxes by dragging an email message and hovering over the primary mailbox.

Before OS X 10.2.2 Mail, if I wanted to move an email message from a mailbox to another mailbox nested within a mailbox (a mail subfolder), I simply clicked on the message and dragged in over the primary mailbox, which would then "open" to reveal the mailboxes nested within it. When I try it now, the primary mailbox does not open. Are there any fixes for this?

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

I can't connect to Wi Fi.iPhone 4s upgraded to iOS 7 and have tried resetting the network

Wi Fi is grayed out and can't connect to Wi Fi or turn bluetooth on. I am using iOS7 and have tried resetting the network settings. Can anyone help?

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

How can I get a preloader to launch a main (external) swf file, and have the main file remove the preloader once it's fully loaded?

Using Flash MX, ActionScript 2:
I’ve been struggling for several weeks, trying to get a preloader to work on a large (~80 MB) photo portfolio file (using the method where the preloader is on frame 1 of the file, and when loading is completed, it jumps to the content). I’ve done countless tutorials, and none seem to work on my presentation. I even tried downloading a trial version of CS4 so I could export every one of the file’s library movie clips and images so that they load on Frame 2 (a feature MX doesn’t have). It takes about 20 seconds for the .exe to load from a CD, and no matter which preloader construction I use, it always seems to appear in the last few seconds before the movie loads completely. During the initial wait time, there’s no indication that anything is happening: no hourglass on the mouse, and not even a blank screen. This is only true for the first time that the file is loaded from the CD; on subsequent loads, the file must already be in RAM, because it loads within a few seconds.
I decided that I’m going to try and make the file which the user clicks on (one named Windows_Portfolio.exe or another called Mac_Portfolio.hqx) the preloader so that it would be tiny, and would load instantly. I want that file to launch the external huge portfolio file (renamed files.swf), keep track of its loading progress, and cycle through a slideshow (10 thumbnail images that transition into each other over 100 frames) proportionally, based upon the percentage of files.swf that had been loaded.
I assume that there should be a loadMovie() or a loadMovieNum() command on the preloader’s timeline to launch files.swf, and that the initial code of files.swf should have some sort of this._parent._visible=false or other way of deleting the preloader on level0. Can anyone explain the steps to me, or direct me to a good Flash MX tutorial that explains how to launch another external swf from a preloader .exe, keep track of its load progress, and delete the preloader .exe once the external swf had been loaded?
Also, I’ve read that, using this construction on a CD, every file has to be in the same place, and that I can’t nest files.swf in a folder named “files,” and reference it with files/files.swf. Is this true?
Thanks for any assistance you can offer.

If you know JavaScript (ECMA Script) then you might be able to get it done applying a for loop and a random function
to the for loop if you know how to get a page-loaded request into JavaScript.
But an easier solution, if you know ActionScript 3.0, and if your SWF's don't need to be recoded and can load into a "container" SWF would be to create a master FLA file that loads your SWF's in a random fashion using Math.random() as a multiplier, though you won't see much variation if you only have 2-3 SWF's to load--if you had more than that then you would begin to benefit from the random function's capabilities. In ActionScript 3.0 use the load() method along with addChild() to load the SWF and add it to the stage. You will be able to search for specifics on how to code the FLA properly by using Flash's Adobe Help tool and also using an internet search.
-markerline
P.S. Once you have the master FLA coded you can Publish it to an SWF and an HTML and if the container/master SWF needs to be in a page with other content you can simply copy and paste the object and embed tags for the container SWF from the published HTML into any place on your master HTML that you need it to reside. You can then use CSS to control placement of the SWF object if it is in a div tag.

How can I create a Teststand (1.0.3 or 2.0) distribution without having all of the VIs (6.0.2 or 6.1) in the same directory?

How would I create a Teststand distribution of LabVIEW VIs and maintain the test VI directory structure that I want?
I know that I have to use the application builder to build the custom operator interface, configure it as an ActiveX server, and launch the Teststand engine installation.
The only problem that I have is using the VI packager which puts all of the test code and sequences in a single directory.
This gets quite messy. There are just over 1000 files in the neatly orgainzed directory structure that I have now. (this includes support files, dll's and such)
I have read brief appnotes on configuring the ini file(s) to use
the vi search path that I want, but have not been able to get this to work. Maybe I'm not updating the correct ini? or have to include each subdirectory?
I have currently upgraded from LabVIEW 6.0.2 to 6.1
I am currently using Teststand 1.0.3
I have not upgraded to Teststand 2.0 yet because I have not decided if I want to build at this revision or go through the extra work to mass compile Teststand at LabVIEW 6.1, install the LabVIEW 6i VI Packager Fix, and update the new Teststand LV operator interface with my changes.
At present, I'm not getting the results I want and am quickly running out of time. I have to deliver the project by the 14th of July 2002.
Sorry for the long question and thanks for you help.

Hi,
I dont think the problem is really related to using the VI Packager but more to how the OI interface applications relates to labVIEW File constants.
If you are using the LabVIEW as the ActiveX Server then there should be no problems. But if you are using the Runtime LabVIEW server such as 'TestStandLVRTS' then the file constant would return different paths.
eg for the Default Path you would get 'C:\TestStand\Components\User\RuntimeServers\LabVIEW' instead of 'c:\Program Files\National Instruments\LabVIEW'.
Attacted is an example to show how to change these paths when using your runtime server. Unzip this into your teststand examples folder
Put the INI file in the location of the \user\runtimeservers\labview folder.
Change the labview adapter t
o use TestStandLVRTS.exe. You can run the example sequence from either the OI or seqeditor.
I hope this helps
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
UsingLVOI.zip ‏20 KB

I use i-tunes for backing tracks with an acoustic band...how can I get a playlist to play one song at a time and not go to the next one until I manually select it?

I use i-tunes for backing tracks. How can I set up a play list to play only one song at a time and not go to the next one until I manually select it?
Thanks

Uncheck all the songs in the playlist. iTunes will then play one song and stop.
Regards.

How can i use a song as a ring tone from a cd i have loaded on the 4s

How can i use a song as a ringtone from a cd i have loaded on my iphone 4s

The weird thing is, when u make your own ringtones, they sound terrible when set as a ringtone (really tiny and generally awful), but when u set them as a text tone or any other alert they sound great (like they do when u play them through the music app).
Is this just a bug with iOS5 or have previous models also done this?

How can I sync photos from my PC to my I Pad 2 and keep them in the folders (albums) they are in?

On my PC, all my photos are in folders named for topic or year and they used to sync that way onto my I phone and I pad. Now when I sync to my I pad, they are all jumbled up into the wrong folders (albums) - really mixed up in no particular order. Can anyone help with how I can sync and keep them in the folders they're in on the PC?
Thanks

Thanks - that helped. But when I tried to sync all my photo folders to the I pad 2, I tunes would add some but not all of the ones that were marked to sync, end the sync, then the I pad 2 would hang with the wheel turning, saying it was still syncing photos, and it would not end and the remaining folders of photos never appeared. I finally had to sync and re-sync over and over by adding one folder of photos at a time, then another and another.

HT1386 I have downloaded my cd music from my previous computer to my I Phone. The phone will randomly play the music without notice, therefore killing my battery. How can I save this music from my phone to my new computer, and erase it from the phone???

The music that I downloaded from my previous computer to my I Phone constantly plays without notice. How can I delete it from my phone after downloading to my new computer????? I will pick up my phone to make a call, and the music is playing, even tho I didn't tap on the music symbol. Is this a problem with my phone?? Can I successfully download from my phone to my new computer???????? This is a very annoying problem and I need it solved. My battery is always run down.

If iPhone music is not on iTunes Library, you need a 3rd party tool to help you
Mac: http://www.ecamm.com/mac/phoneview/
PC: http://www.wideanglesoftware.com/touchcopy/index.php

How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you

Similar Messages

Maybe you are looking for