I set my printing size on PS Elements 10 for a certain size, but it prints 1/4 inch larger?

I set my printing size on PS Elements 10 for a certain size, but it prints 1/4 inch larger?

In addition of Hatstead suggestion my Suggestions are  following:
1. From your Printer's Preferences uncheck the Borderless check box (if checked already).
2. After launching the Print dialog, click on More Option button, then under Printing choice tab make sure that Border section has all check box unchecked.
3. Uncheck the "Crop to Fit" check box if it is checked.
-Tywin

Similar Messages

  • How to Restrict printing the document using IRM for a Single Document?Allow printing for some documents and restrict the printing for particular documents in same document library?

    Can we able to Configure the IRM in Document Level in SharePoint Document libraries?
    The document library contains multiple document sets , Can we restrict the printing according to document sets? Allow printing for some documents and restrict the printing for particular documents in same document library
     Is this possible?Please suggest.

    Yes, that can be done. But note that all administrators will have the same right to print, so you need to make sure the users are not administrators. You can include a macro to disable printing, but if the users disable macro, they can print the documents.
    Hence, there is no foolproof way to prevent printing documents. If you still need a foolproof security, PDF format provides password based security (viewing doesn't require a password) that can be implemented to prevent the document from printing,
    which doesn't require any special scripts and is tough.
    You can have a look at the following links:
    http://msdn.microsoft.com/en-us/library/office/ms458245(v=office.14).aspx
    http://msgroups.net/microsoft.public.word.docmanagement/prevent-printing-of-docum/91353
    http://www.go4sharepoint.com/Forum/prevent-printing-saving-documents-10150.aspx
    The following link explains about the security features in PDF. This is for information purpose only and not for promotion of any products:
    http://www.pdflib.com/knowledge-base/pdf-security/
    Balaji Kundalam

  • I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

    I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true.  . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . .     STACK: / [    -mark-   /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

    Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
    Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
    Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

  • How do you hide elements for mobile screen sizes?

    I've built an interactive Edge page that is 1200 pixels wide. I'm working on making things responsive, and I would like to hide elements when the browser hits a mobile screen size - similar to adding a media query and setting an element to display:none at 450px or similar. How can I do this within Edge?
    If this is not possible within the interface, can I add my own media queries to the css to do this?
    Thanks.

    Hi ,
    Check out this forum post : Hide Elements with Screen Size CSS style sheets?. Might be helpful.
    Thanks and Regards,
    Sudeshna Sarkar

  • When I click the "print" button on my menu, I get a "ding", but the print menu doesn't open.

    My printer menu opens in all my other program, including Chrome. My printer is operating. I've printed a page with it. Everything was fine until yesterday. I closed my system last night and rebooted this am. The problem still exists.
    I didn't reset my Firefox printer settings because I don't want to create any other problems.
    I'm using version 32.0.3 of Firefox and Windows XP
    What should I do?
    I appreciate your help with this.

    hello, could you go to the firefox ''menu ≡ > help ? > troubleshooting information'', copy the contents of that page and paste them here into a reply on the forum? this might give us a clue what is going on...

  • IPad won't print wireless since power went off and on yesterday,  but will print wirelessly from laptop.  What do I do?

    iPad says my printer is off line ( since power went off and on yesterday.  My laptop prints wireless though so I am wondering how to get my IPad back to printing?

    Restart your printer and router by removing power to them for 30 seconds.

  • I have a print hp laserjet 2605dn with operating system windows 7 but not printing on color

    Hola comunidad tengo un laptop dell con windows 7 y le instale una impresora hp laserjet 2605dn pero no imprime a color me puden decir si alguien ya soluciono este problema? 

    Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
    In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
    [[Flash Plugin - Keep it up to date and troubleshoot problems]]
    [[Flash 11.3 crashes]]
    [[Flash 11.3 doesn't load video in Firefox]]
    Other, more technical information about these issues can be found under these Links:
    http://forums.adobe.com/thread/1018071?tstart=0
    http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
    Please tell us if this helped!

  • Connected wirelessly to Canon printer MX340. Duplex printing option is grayed out for me but not on my daughter's non-Mac laptop or husband's PC which is connected to the printer. Mine has two-sided option available at the Apple store. Any ideas?

    We use a Canon MX340 series printer/fax/scanner. My husband has his PC hooked to it and my daughter prints wirelessly from it with no problem with her non-Mac laptop. I have trouble printing. Often it does not print and I have to delete the job from the queue. Other times it will print OK but two-sided printing is always grayed out in my printing options. When I took it to the Apple store and printed on their network (selecting their printer) the two-sided option was available. Makes me think the printer is set up wrong, but I am not certain. A fw times at home when trying to print I got an error message about incompatible fonts, but it printed anyway after deleting the job and starting over. Does anyone have any ideas? Thanks

    OK, just an update.
    Two years into this, I still find I can only do full duplex printing by using Windows XP running inside of VMWare. I've had occasional, ephemeral luck with duplex printing, but nothing long lasting.
    I've tried this in Tiger and Leopard (now at 10.5.6), and I've had this issue with Canon printers MP780 iP4300 and MP610, direct connected to my Core2Duo 17" MBP. I also have this issue when printing over a network, but that's a much harder problem to solve.
    Currently, this is my #1 most pressing issue for my Mac, because not being able to print from a computer when you print a lot is a really big drag, and using VMWare all the time is also a really big drag. Other people posting seem to be able to print in Duplex using the very same printers. What could be wrong with my MBP? I see the duplex box option, but most of the time it's grayed out as if my printer doesn't support duplex.
    I've tried direct selecting printer drivers from the system preferences, but nothing seems to have an effect. And this is off of a clean Leopard install.
    My wife now has similar problems with her new MBP - the Canon print drivers (CUSP & non CUSP) aren't allowing the Duplex box to be checked.
    I am willing to pay good money to anyone who thinks they can fix this problem.
    Thank you,
    - Jeff

  • BPEL - multiple receive elements for same partner/operation

    Is it possible to have more Receive elements for same operation in one BP? I need to create a business process for approving requests in a number of steps. The process looks like this:
    RECEIVE (createRequest)= INVOKE (...)
    < REPLY (createRequest)
    RECEIVE (approveRequest)= INVOKE (...)
    < REPLY (approveRequest)
    RECEIVE (approveRequest)= INVOKE (...)
    < REPLY (approveRequest)
    (...)The creation and first recieve element for "approveRequest" is ok, but the others are never executed. I believe the correlation sets are set correctly. I also can't use a While element since every step could be a bit different. If I substitute the other recieves for different operations, the whole process executes correctly.
    Can someone please advice me on what i am doing wrong? If it's somehow not possible to have more then one Recieve for a particular message in one BP, what is the best way to do it differently?

    Thank you for your answer. I tried to change the Receive elements to Pick + OnMessage, but it's not working either. It goes past the first one but it never reaches the second one. That's what i had in the first place - two Pick elements after each other, each with an 'approve' and 'dispprove' branch, but it didn't work so I simplified it to an easier process with just receive elements.
    If it's working for you, do you do something special in the process? Which version of OpenESB are you using? Would it be possible for you to send the BPEL file? Here is a part of mine I've just made to test this solution.
    <bpws:pick name="Pick1">
        <bpws:onMessage partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemIn5">
            <bpws:correlations>
                <bpws:correlation set="orderItemId" initiate="no"/>
            </bpws:correlations>
            <bpws:sequence name="Sequence2">
                <bpws:assign name="Assign7">
                    <bpws:copy>
                        <bpws:from>true()</bpws:from>
                        <bpws:to part="return" variable="ApproveOrderItemOut4"/>
                    </bpws:copy>
                </bpws:assign>
                <bpws:reply name="Reply3" partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemOut4"/>
            </bpws:sequence>
        </bpws:onMessage>
    </bpws:pick>
    <bpws:pick name="Pick2">
        <bpws:onMessage partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemIn6">
            <bpws:correlations>
                <bpws:correlation set="orderItemId" initiate="no"/>
            </bpws:correlations>
            <bpws:sequence name="Sequence1">
                <bpws:assign name="Assign6">
                    <bpws:copy>
                        <bpws:from>true()</bpws:from>
                        <bpws:to part="return" variable="ApproveOrderItemOut3"/>
                    </bpws:copy>
                </bpws:assign>
                <bpws:reply name="Reply2" partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemOut3"/>
            </bpws:sequence>
        </bpws:onMessage>
    </bpws:pick>

  • 5520 turns on and paper runs thru but nothing prints

    I have a 5520. It has HP cartirges. I didn't use it for awhile and now it won't print black or colors. The paper runs thru but nothing prints. I use Windows 7 and this the second time this has happened to me with a HP printer! The last time I was able to remove the printhead and clean it. The insructions for the 5520 indicate you can't remove the printhead, but somewhere on this forum were instructions how to clean it by yourself. just my luck I can't find that post. I've run all the recommended HP solutions and none of them work. Any suggestions because I'm fed up with HP printers.

    Hi @chico1119 and welcome to the HP Forums!
    I'm sorry to hear that your Photosmart 5520 has been having issues printing black, but I will certainly do my best to help you out and hopefully get this resolved
    You had mentioned you tried all the recommended solutions. Are those solutions the steps contained within this Printer Prints a Blank Page or Does Not Print Black or Color Ink document?
    Once you've verified that for me, can you also let me know which country you're in? Thanks so much, hope to talk with you soon!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
    Thanks,
    Shir

    sbmgrams wrote:
    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
    See here:
    Reading PhotoDeluxe PDD Files

  • Print Slides With Notes: change size/layout of elements?

    Is there any way to change the template Keynote uses when printing Slides With Notes? I'd like to reduce the size of the slide & increase the size of the Notes box.

    Here is a somewhat klunky workaround that I use
    First make a custom paper size that is bigger than the paper you will end up printing to (I use 8 1/2 by 16 to print to 5 1/2 by 8 1/2)
    When you go to print the keynote file change to this paper size in page setup
    Then instead of printing save to a pdf file
    Open the pdf with Adobe Acrobat Reader
    Set the paper size to the size you actually want in the page setup dialog
    Go to the copies and pages drop down menu and select "paper handling"
    Click the "reduce to fit" item
    Print the file
    If anyone has a simpler way I would love to know it too!

  • When I print my airline boarding pass in FF, (either printer or to a pdf) it is too small. When printed in IE, it is full size. Is there an add on or setting I can change to allow full size printing?

    I fly Alaska Airlines. When I web check in from home and print my boarding pass I either print to Adobe and save the file for later printing or print directly to my printer. The PDF version is about 1/3 the normal size, the direct print is 1/2 the normal size.
    This only happens with FF. When using IE, it prints normal size for both the PDF and direct printer version.

    I recently tried sending myself an email through Thunderbird to another email account to see if that was the case, but the email came in with a font so tiny that it was unreadable. I had chosen a font type and size (arial 10) and just coming into my outlook inbox was virtually unreadable.
    And referring to the person I work with, she doesn't have problems getting anyone else's emails, just ones I send from Thunderbird.

  • Print settings missing from Elements 8.0 for my canon ip4820

    I have the exact installation on my windows 7 pc and I get a detail screen with 5 print settings, on the macbook with Lion I get only 3 settings and I can't bring up the canon printer settings dialogue that allows me to set standard, photo, etc along with borderless, high quality, etc, you get the idea I think.  On mac I only get 1. Select printer 2. select paper size, and 3. select print size.  On windows 7 I have installed the same printer and I get 1-5 which includes also step 2 is a "printer settings" which includes a change settings and brings up an advanced settings box.
    Any Help is appreciated.  

    Well I am using a mac with photoshop elements and I imagine the print settings would be the same whether it was elements or full photoshop.  Maybe someone could provide a helpful response for a beginner here, thanks in advance.  but I'll look around for a more appropriate forum if there is one. 

  • Printing borders from PS Elements 5.0 Organizer

    My PS Elements 5.0 Organizer mode will print a nice photo but without a border that would enhance the photo content, even though I have checked the little box requesting a border of a certain size and color. What is the correct procedure?
    The Editor mode will print a border, but the image is way off center. Perhaps that is because I am chosing the wrong paper size from the coded list of A4, A5 etc. Where can I find the dimensions of those codes?

    Are you asking for the paper sizes selected?If yes you can do so by opening the printing preferences and then choosing the paper size.You can also do so by opening the page set up dialog box.

Maybe you are looking for