I set YAHOO as my home page, but it is only in the center with a white screen on both sides, how do I set to full page view without loosing my toolbars?

I set yahoo as my home page, but it only appears in the center with white screen on each side. I have tried to change to full view, but then loose my toolbar. Is there a way to change YAHOO to full screen and keep my toolbars?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can ignore the RFC 5746, see CVE-2009-3555 error message in the Tools > Error Console<br />
That message is for site Administrators to alert them to update their server software.

Similar Messages

I want to print an email which has multi pages but I can only print the first page

Can anyone help please?
i want to print an email which has multi pages but I can only print the first page
Tony

Firefox cuts off the URL in your printout, if it's really long, and you also have on the same line (header or footer), the Date and Pages
What I have summarized below is based on this page . . . http://www.watchingthenet.com/how-to-change-or-customize-firefox-printing-defaults.html
I have two questions:
To fix, do a custom setting, for the Header and Footer as follows:
Print / Page Setup / Margins & Header/Footer / "Customize" the "Left" as follows (leave Center and Right all blank)
&T
&U . . . . . . . &D . . . . . . . &PT
&D shows the Short date as: M/d/yyyy - and then the time
To change the format of the Short date in Win 8.1, go to:
Control Panel / Date and Time / Date and Time tab / Change date and time / Change calendar settings /
Date / Short date . . . change from M/d/yyyy . . . to . . . MM/dd/yy
QUESTIONS:
1.) How do you get rid of the time, which appears after the date? In IE, you use a lowercase "d" - but that doesn't work here.
2.) Is there a way to change the font just for the Header and Footer, to something like Microsoft Sans Serif 10?
Firefox leaves no room around the text in the Header and Footer at the edge. To fix:
Address Bar / about:config
Enter keyword "edge"
Then change all four values for the printer you're using to:
print.printer_Foxit_PhantomPDF_Printer.print_edge_bottom . . . 5
print.printer_Foxit_PhantomPDF_Printer.print_edge_left . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_right . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_top . . . 5

Just got a new iPad, but I don't want the info from my old on this one. How to I set it up again?

Just got a new iPad, but I don't want the info from my old on this one. How to I set it up again?

Here's an article on how to setup your new iPad.
http://ipad.about.com/od/iPad-Tutorials/ss/How-To-Set-Up-An-iPad-For-First-Time- Use.htm

I have just bought appletv and trying to get home sharing going from iPad to appletv support says it is simple just settings and iPod and home sharing but I don't have iPod as an option on my iPad settings so how do I set up home sharing please

Ipad2 iOS version 5

Thanks for your reply I have set up home sharing for music but on appletv now they want me to subscribe to iTunes match for an annual fee. I cannot find an 'advaced' option on any menu. Perhaps ihad it all wrong with appletv I thought I would be able to have the same apps on my appletv as I had on my iPad bt is it really just for renting videos off iTunes?

When I click an email link it opens a new tab but it doesn't show the website, I have to click "ALLOW" first. How do I set it to show automatically??

This started happening after a recent update, I'm running FF 16. It's very annoying when I check 10 emails at a time. Can I get it back to the way it used to be, opening websites from email links automatically. I don't need the added security as I have WOT and KIS installed.

That fixed it, thank you!

Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?

Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?
I am working on an end-user's computer, I just updated to the newest Adobe Reader and they don't ever print duplex. I want to be able to have the "print to both sides" box unchecked on the print dialog by default. Is there a way to do this? I have the printer settings all set to 1-sided but it is adobe print dialog settings that keep messing it up.
Thanks!

Hi John,
Have you tried repairing Reader and checked?
Does this issue occur only on this machine or are you facing the issue with other computers as well which have updated to Reader 11.0.10?
Regards,
Anoop

(my yahoo browser is in English but when I click mail the result is HK" and in Chinese. I want English.

(my yahoo browser is in English but when I click mail the result is HK" and in Chinese. I want English.
Somehow when I log in, the yahoo account changes to "yahoo hong kong" instead of staying at www.yahoo. thanks

Interestingly, it appears you did manage to get your podcast accepted in the Store - if you did this with an .html feed I'm a bit surprised it worked. I wonder whether you started with an .xml URL and it got changed by accident?
If you did manage to get the Store to accept a feed with an .html extension then you will need to change its attention to the revised version of the feed. This will mean that you will have to leave the present feed where it is, upload a version with the correct extension (having checked it works) and then add the 'itunes:new-feed-url' tag to the incorrect feed as described in this page:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
Of course if you managed to change the extension by accident then changing it back should do the job.

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G.

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

Cannot log in to Nationwide internet banking in Firefox. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorer

Question
Cannot log in to Nationwide internet banking. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorer

That issue can be caused by corrupted cookies.
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9

I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
I'm using Preview Version 7

Hello @kgingeri1,
Welcome to the HP forums.
If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
If ePrint works fine, it is definitely a Google Cloud Print issue.
Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

I bught a new Time Capsule 2Tb. I connected it to my internet router. I manege to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

I bought a new Time Capsule 2Tb. I connected it to my internet router. I manage to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

What IP address does the TC have and what IP does the computer have?
We need more info as we really have no idea what your network looks like.
Modem router, model, type of broadband?
TC setup as bridge or router?
Is the computer getting internet via the TC?
Are you using wireless or ethernet?
Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

I'm trying to set up a sync account but when I get to the window with the "Create a new account" and "Connect" nothing happens when I push either of the buttons.

I'm trying to set up a sync account but when I get to the window with the "Create a new account" and "Connect" nothing happens when I push either of the buttons.

By the way, this is in the brand new Firefox 4, not an extension.

I created an obituary using indesign but it will only print the even nuber of pages. What am I missing?

I created an obituary using in design but it will only print the even number of pages. What am I missing?

Check your print dialog box, see if Even Pages Only has gotten selected.

This is my first mac, it is a macbook pro. i restarted it but when it started back up i saw a white screen and then it prompted me to insert the reboot disk. anyone else have this problem?

I recently bought a Macbook Pro, this is my first Mac. I restarted it, but when it started back there was a plain white screen and then it prompted me to insert the reboot disk. Has anyone else had this problem and is there a way to do this manually like with PC's?

The new Mac's came with OS X Lion 10.7 and there are no boot disks.
Since it's so new, take it back to the Apple Store and let them deal with it.
If not you can hold Command and r (as in rotten) keys down and boot the computer.
You'll be presented with a several options, including one to reinstall OS X Lion provided you have a Apple ID, which means you have to use Safari in there to set one up. To do that you need to set up a email account with Google or Yahoo. Once you get the ID, then you can download Lion and reinstall it.
It's so stupid not having a copy of the OS on hand to perform your own repairs.
Of course Apple will be happy to sell you a $69 Lion USB stick.
Like I said, take it back to the store, and try to get your money back, that will force them to think about just giving you a replacement machine that works.
Lion doesn't work really but it can be acceptable until the patches get released.

I set YAHOO as my home page, but it is only in the center with a white screen on both sides, how do I set to full page view without loosing my toolbars?

Similar Messages

Maybe you are looking for