I think there is a bug in belle
i recently connect my nokia 500 to a wifi connection all things are going good then
i try to connect it by 3g nothing happens in the browser then i reinstall firmware
than it say connection fails
and then after few more trials nothing happens in the default browser
or any other app also......every app i trying to connect
nothing happens no error nothing !!!
when i goes to connectivity - setting all the things freeze in belle
i have check for virus but nothing found !!
now what to do ????
please give me kudos if u like my post
Solved!
Go to Solution.
Try 3G, nothing happens and you reinstall firmware?? You reinstalled firmware for such a small issue...?
Please clarify your problem in clear language...
In Settings you could have gone for setting it to "Always allow", from "Use Wifi only"... But you said that freezed.
==============================
My Story: Used 6670, Used N91, Used N8, Using Pureview 808 now. I requested Nokia to get N91's sound quality and features in the latest phones. No response from Nokia!
Similar Messages
-
Since I have iOS7, I can't have any USB connexion with my Macbook pro!!!! even after another my iphone was exchanged, I think there is a bug in IOS7!!!
philippefromfra wrote:
Since I have iOS7, I can't have any USB connexion with my Macbook pro!!!! even after another my iphone was exchanged, I think there is a bug in IOS7!!!
Sounds like a bug in Macbook pro. May be bug in the cable? Everything bugged up on you. -
I think there is a bug in my BB 9650
I have a Blackberry 9650 which I have been using from quite a long time now, but suddenly have started facing challneges. I phone is auto typing nmnmnmmmnnnnn continuously. It is not letting me access anything. Do not know what to do, can somebody help.
Hi and Welcome to the Community!
What you describe can be caused by moisture intrusion...if that is at all possible, then...
REMOVE YOUR BB BATTERY NOW!!!
Run, don't walk, to this FAQ:
http://http://www.ehow.com/how_7307294_dry-out-blackberry-rice.html
Do everything it says, including waiting the maximum recommended time (perhaps longer...perhaps 5 days). Applying power to your BB between it getting wet and doing this process reduces the chances of success. Further, the only thing predictable about moisture intrusion into a BB (indeed, any electronic device) is that the results will be unpredictable. I've seen some come back up right away and be fine. I've seen others never work at all. I've seen still others run for a bit, and then die later. And every thing in between.
Otherwise, I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
It is, of course completely possible that this is a physical hardware problem...which, if that's the case, then no amount of internet distance diagnosis nor OS/software level "fixes" will be of any use at all.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I think there may a bug in C++ standard library.
Where do I report it?
Hello,
I'd put it on Connect:
http://connect.microsoft.com/VisualStudio
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
I think there is a bug in the new ec bios for gt60 2OD(ver1513)
I have put a post on:
https://forum-en.msi.com/index.php?topic=182144.0
The Post:
I have bought a GT60 2OD-063CN. I download the new ec bios from the official site , the version is 1513(the stock version is 16f4EMS1 ver 5.04)
And i follow the offical instruction and unrar the files and use ecwin.bat to update the ec.
Now it is the problem.
It seems if I use the ecwin.bat, then the system will use 16f4EMS1 ver713 which is in the 353x document.
After update the v713 ec, the touch function(fan, back light etc.) is misfunctioned.
And I manually use the 16f4EMS1 ver 513 ec which is in the 352x document to update, now it seems the touch function is worked again.
So I wonder what is the differences between the 2 ec bios and what is the mechanism for ecwin.bat to judge which ec should be used?
After all the auto "ecwin.bat" file will lead you into 353x and use the wrong ec.
PS: the system is the stock win8. I have take away the barttery to reset the ec.
It seems some people faced the same problem. I hope msi could correct the ec bios update.
https://forum-en.msi.com/index.php?topic=181181.0Quote from: nex86;109588
I'm having the issue on my GT70 2PE that backlight is not working before the Steel series engine drivers is loaded.
The firmware that I have flashed is w8_1763EMS1.513 and it flashed 353x because SB_DetectToolWin32.exe reported errorlevel 3.
As I know the backlight keyboard does not light on until SteelSeries Engine is loaded. -
Serious issue.....
Might be a Safari extension issue...
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
I am a web developer. The bug is in latest versions of FF however works fine in previous versions 6-9 (I believe), IE,Chrome. Please go to http://partybannerman.com/svg2/svg-editor.php?id=108&catid=35&wch=MXx5
Select the number 7 with the arrow tool. Observe the location of the cursor
Click-drag the selection and closely watch the cursor.
The cursor no longer is in the same relative position. relative to the object selected.
This is particularly annoying when zoomed into the "7".
The precision is necessary for commands that we are implementing that require the cursor position relative to the object selected to be exact.
Please advise, and thanks for your helpNot entirely sure I follow your instructions. One thing I do note is the initial starting position of the "7" differs when I compare Firefox (17 or 10) with Chrome. Is that relevant ?
I wonder if part of the difference may be in how differing browsers cope with the code. I am not a developer and do not know how relevant this is but I note if I try the validator http://validator.w3.org/unicorn/ it is returning some errors.
If you do think there is a bug try to make a simple test-case that demonstrates this and post in [https://bugzilla.mozilla.org/ bugzilla]. If this appears to be a regression it would be handy to pin it down at least to a particular Firefox version, although users should not now be using Firefox 6-9. (Drill down from [https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ here] if you need an old version of Firefox to run tests with)
Someone more knowledgeable may provide further information, or if you need advice on troubleshooting coding issues you may find this forum useful http://forums.mozillazine.org/viewforum.php?f=25 -
Hi everyone,
I've recently updated my iphone 4s with the ios7 update and there was a bug fix I also downloaded recently but I hadn't noticed anything wrong at the time. I know it's not happened that often today but does anyone have any problems with their 'slide to unlock' button and have to reload their iphone again? Do you think there'll be a bug fix for it? Just worried as it's not old and I have a feeling I shouldn't have bothered with the update at all.Why would you think it's a bug? If it were a bug EVERYONE would be having the same issue.
Basics from the user guide are restart, reset, restore from backup, restore as new. -
Battery running down fast using Yosemite, running the latest update 10.10.2. I think there is bug in this update. Please help me out or is there a way can i switch back to mavericks and how
1. Check the cycle count of the battery against the rated life for your model. The battery may be due for replacement. If the power adapter is connected almost all the time, the battery may need replacing even though the cycle count is not too high.
2. Follow these instructions, or these for OS X 10.8 or earlier.
3. In the Energy Saver preference pane, uncheck the box marked
Enable Power Nap while on battery power
if it's shown (it may not be.)
4. You can also try resetting the SMC.
5. Make sure your system is up to date in Software Update.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service center. -
When I had 10.6.8, itunes would have a left over amount in itunes apps, it would show you would have 8 apps that need to be updated. I would got to up date them and there would be no apps to up date. 2 days later I would go to up date apps and it would show I have 15 apps to update when I really have 6 then it would add on more invisable apps to which is not there. There is a bug in itunes that needs to be fixed please fix this app section. I have sent letters about this before and you did not listen. I a beta tester and I hate it when my requests don't get fixed.
You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface -
Is there any "offical bugs report" page?
Hi,
I am looking for the offical web page / email or something like that to report all bugs I can found on my phone.
As far as I know, this is a discussion borad, not even a offical support page from Nokia.
I tried to go to Nokia Care, and THEY NEVER DOCUMENT AND REPORT MY ISSUE AND BUGS CORRECTLY AND ENOUGHT DETAIL. They just reset my phone / fix some hardware, and send it back to me.
There is no knowagebase (sth like FAQ or MSDN) from Nokia. (wow, they even have no "What's News" for FW upgrade)
I am not sure that do they know about the problem, or any suggested solution.
Anybody know what sould I do? what is the best way to report bugs to the FW development team?do you think there will be a new firmware update for e52?
E52 - Product code 0585050
UK.
V54.003 -
I think this is a Bug of String class
I think this is a Bug of String class, do you agree with me ?
String s = "1234........"; // when "1234........". length() > 65535, there will be wrong, but
char[] c = new char[88888];...
String s = new String(c);even if c.length >65535�Cevery thing is ok.
so I think is a bug. Somebody give me a answer, thanksbelow is the two Constructors Of String
public String(String original) {
int size = original.count;
char[] originalValue = original.value;
char[] v;
if (originalValue.length > size) {
// The array representing the String is bigger than the new
// String itself. Perhaps this constructor is being called
// in order to trim the baggage, so make a copy of the array.
v = new char[size];
System.arraycopy(originalValue, original.offset, v, 0, size);
} else {
// The array representing the String is the same
// size as the String, so no point in making a copy.
v = originalValue;
this.offset = 0;
this.count = size;
this.value = v;
}=====================
public String(char value[]) {
int size = value.length;
char[] v = new char[size];
System.arraycopy(value, 0, v, 0, size);
this.offset = 0;
this.count = size;
this.value = v;
}I don't know where has the problem. -
Home sync thinks there are duplicate names when there are none
Home sync keeps complaining about some directories having the same name except for some capitalized letters which is complete bogus.
Example: I have a directory called "W3C Css geniales layout" and there is no other directory or file with the same (stupid ) name anywhere on my computer. The other example is "Moviessamlonlab". in this case there is another directory called "Movies-Tony". I suspect that homesync has problems with Spaces and hyphens in directory names. Renaming the directories helped. I still think this is a bug since any directory name that I can create (without the os complaining) is valid and should be considered valid by any other program! I have an intel core 2 duo macBook with OS X 10.4.10Hello there,
I'm having the same problem here,
tried deleting ~/Library/Mirrors/*,
tried changing/resetting to "me":wheel the user/group of the files on the client AND on the server,
tried changing the permissions to 775,
tried a "touch" on every file
tried a chflags -R nouchg
all of these amounts to the more files are touched on the server, the more conflicts occur.
The weird thing is that files ARE synchronized both ways correctly,
I just keep getting a Synchronization conflict on EVERY file (59014 files) at every background sync...
Any help here ? -
I think there should be a flash card app that let's u put in ur own info. I'm studying for a test and I think it would be really cool to have my flash cards in my phone!! Is there an app like that already?
http://www.appshopper.com/education/flashcards
-
I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!
You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store
Maybe you are looking for
-
Com.sun.tools.javac.Main: method compile errors
I had a working web project the other day, and something happened that caused every page to start throwing this error: # javax.servlet.ServletException: com.sun.tools.javac.Main: method compile([Ljava/lang/String;Ljava/io/PrintWriter;)I not found # a
-
/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:
-
TS1398 the wi-fi tool on my ipod touch is not working.
the wi-fi tool on my ipod touch is not working. i even can't turn it ON
-
Input Textfields not working in fullscreen mode
Input Textfields not working in fullscreen mode any one help me.
-
Problems referencing a primary key field in a master-detail
Hello, I am making an application where I have a master-detail page. In the detail section it is possible to add new rows using the standard "Add row"-button that the wizard creates. The detail section has a column with a link in it. This link leads