I touch dead while updating software

I have faced serious problem while installing automatic software update. My ipod touch was totally dead, there is only displays apple icon. I tried restore older software by itunes but there is unkwon error occure. Please help me how to install previous version OS software to my ipod touch.

my itouch too is in the same state. i tried resetting the network settings, since my itouch wasnt getting connected with the wifi network, after which it wont restart at all. Jus the apple logo appears, after a few seconds, even that display gets distorted. when put in recovery mode, and connected to itunes, it gets detected, but on restoring the firmware, itunes says some unknown error and wont restore it. my itouch is now totally unusable. please help.

Similar Messages

  • While updating software on my iPod touch 4 my computerswitched itself off and now iTunes is asking me to restore to original settings but there are photos on my iPod that have not been backed up. Am I going to lose them?

    While updating software on my iPod touch my computer switched itself off and now iTunes is asking me to restore to original settings. I have photos on my iPod that were not backed up so will I lose them if I resore to original settings? If so is there any way I can get them back?

    After you restore to factory settings/new iPod you can restore from backup. See:
    iOS: How to back up
    That is your only choice

  • HT1386 my i phone 4s dead while update in process , please help

    my i phone 4s dead while update in process , please help

    You apparently aren't listening or don't understand English well enough to understand the responses you're getting.
    An unlocked iPhone will remain unlocked. Updating a legitimately unlocked phone does NOT affect the locked/unlocked status.
    It will only lock IF the phone was hacked or jailbroken to unlock it.

  • HT201263 An error has occured while updating software. Connecting to the server is slow and games etc only run for 60 seconds

    An error has occured while updating software. Connecting to the server is slow and games etc only run for 60 seconds

    Have you tried resetting your iPad? You may have to restore again if there was a problem.
    Try the reset first.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Can't use the camera function in my ipod touch 4s while updated to iOS 6.0

    I can't use the camera function in my ipod touch 4s while updated to iOS 6.0.
    There is all black screen when I turn on my camera. 
    I open the restriction setting already.
    thank you.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • My phone is locked up while update software on ITune with ITunes symboland a connector. It is still connected to ITune for over an hour. How do I recover my iPhone?

    My phone is locked up while updating software on iTunes showing iTunes symbol and a connector. It has been connected to iTune for a long time. How doI restore my phone?

    Click the restore button.
    Use iTunes to restore your iOS device to factory settings
    If you can't update or restore your iOS device - Apple Support

  • My iphone 3gs is stuck at recovery mode while updating software 4.3.3

    my iphone 3gs is stuck at recovery mode while updating software 4.3.3 and even itunes is not responding . and i m using newest software of itunes on mac. please help.

    If you followed all of the steps within that article then it's almost always a hardware issue. Reason being is that if you attempted restoring the iPhone from another computer (as the article informs you to), and you are still stuck in recovery mode, it proves that it is not a problem with the iTunes installation on your computer.
    - Greg

  • Picture of usb plugging into itunes, received error while updating software for ipod touch

    tried updating software on new (refurb) ipod touch. everything was going ok with updates, when it was almost complete i received an error. now i have a picture of itunes with a usb cord plugging into it and it won't do anything else.  accessed itunes through firefox. any suggestions?

    Try here.  iPhone and iPod touch: Unable to update or restore

  • While updating software on my Iphone 3g i am getting 1015 error

    am getting an error 1015 while updating the software, I tunes is uptodate...
    Please advise

    Is your iPhone jailbroken?. Are you trying to downgrade the iOS?. In the article http://support.apple.com/kb/TS3694 this is what it says about error 1015:
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • Error while updating software

    Hi, I have a MacBook Air (2011 release). The software version is Mac OS X 10.7.4. The erro occurs while updating the software. Files are downloading just fine, but when the system is trying to install them I get the error saying that the files cannot be installed on "Macintosh HD" and asking to restart the computer.
    Does anyone know how to resolve this issue?

    i think you really should get your phone to nokia care center
    Nokia 5730XM,200.12.87
    If my post helped you in anyway,Please click on the (Kudos!) Star, THANK YOU!!

  • Ipod Touch Bricked while updating to 3.1.3

    My iPod is a 2nd Gen. I have Windows 7. My update was going fine until the end, when it said that the update failed. I submitted the problem to Apple, but of course that did nothing. My iPod now is a black screen and responds to nothing. Won't turn on, won't enter recovery mode. When I plug it into my computer through USB, it says USB device not recognized. I have taken this problem to the Apple store, and they claim that "It's surely a coincidence that this occurred while updating". I am not in warranty, and they want me to buy a new iPod. My sister's iPod had this exact same problem twice, yet her computer is Windows Vista. She was under warranty, so she just got a new one before we could do any analysis on it. I've pretty much given up on Apple, but would still be pleased if my iPod would work. Any help appreciated.

    Welcome to the discussions,
    make sure that all needed drivers are installed: http://support.apple.com/kb/TS1538
    and that Apple Mobile Device Service is still active: http://support.apple.com/kb/TS1567
    More troubleshooting for iTunes not recognizing your iPod here: http://support.apple.com/kb/TS1495
    If all drivers are installed and still no connection, connect in recovery mode: http://support.apple.com/kb/HT1808 to restore.
    Also delete the ipod software file located in C:\Documents and Settings\username\Application Data\Apple Computer\iTunes\iPhone Software Updates to make iTunes download a new copy when you connect in recovery mode. Maybe the file stored on your PC is damaged.

  • I Pod touch Will not Update Software

    HI, I got an I Pod Touch Model MC540LL (Dont know what Generation it is), Ive tried several times to update software from 4.3.3 to the new 5.0.1? Is that possible? When I try updating using Itunes, the downloading stops and tells me (server reset) I am trying to restore settings to my I Pod because I lost my Passcode for the restriction function (the Restriction function is stuck on (ON)). I am unable to do this with out updating software. Is there any way to restore my I Pod without updating software?

    Yours is a iPod Touch 4th generation with 8 GB storage. Yes, it's possible to update to 5.0.1. Do you have the latest iTunes 10.5.2? Update iTunes and do a restore.

  • HT4623 error 502 while updating software

    error 502 while updating software

    Hi EU@,
    Thanks for using Apple Support Communities.  If you're not able to update your software due to an error, I recommend this article:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Cheers,
    - Ari

  • N96 dead while updating

    hello ,
    my n96 died while updating ( powered off ?? ) 
    now it doesn`t turn on ,
    when i try to turn on only white screen for a second and then goes off ,
    when usb is connected and pressing power button , there are 2 new "devices " in device manager  , these are
    Nokia USB Flashing Generic
    Nokia USB Flashing Parent
    but these devices dissapear after 10-20 seconds , Nokia software update cant connect phone , 
    i don`t think that battery needs recharge , i tried to charge it with  + - wires , but still the same 
    so what should i do ? 
    Message Edited by ogres on 18-Nov-2009 07:28 AM

    hi there.
    I have the same problem as "ogres". so I have E52 and I live in Georgia. I buy my phone in Italy.
    my phone do not start now. battery is not empty. when i press on power button there is not any reaction. when i plug original charger there is not any reaction. when i plug phone on laptop with usb cable, in device manager appears 2 devices about 10 seconds:
    Nokia USB Flashing Generic    &
    Nokia USB Flashing Parent.
    I have 2 year warranty in Italy.
    I have question:
    are there any chances to save my contact list ?
    if yes, how ?
    I think if i send my phone with dhl in Italy to nokia shop, I will loss my contact list. is that true ?

  • How do I get my pics back if they deleted while updating software

    I had a short in my cord while updatiing to IOS 6 so the update was interrupted. when it was done i had no pics
    PLEASE HELP!!

    Restore from your most recent backup.
    You did backup your device beofre updating the software, right?

Maybe you are looking for

  • RSS Feeds on Yahoo Front Page/My Yahoo are no longer loading. Please help!

    After "fixing" my installation of Firefox I am unable to load any RSS feeds onto My Yahoo Front Page! They are all gone. Please help me to recover these important feeds. They are my only source of News every day.

  • Get rid of the 'duplicate' fiasco?

    In amongst the trolling on a closed thread I noticed someone saying that it was possible to reinstall old versions of iWork, textedit and preview to fix this and restore the 'save as' functionality - can anyone confirm this is possible, and if so hel

  • Mail, preview, photo booth, will not open

    After installing Leopard (on my 3rd attempt, clean install) mail, preview, and photo booth will not open at all. i'm opening them from the applications folder, not from the dock. i get an error message that says the programs unexpectedly quit. hopefu

  • How to I play safari videos on TV through apple TV?

    I have an iPad2 with the latest version of iOS. I have an apple TV updated to the latest version. How do I get my TV to be a screen for my iPad? In particular, can I display any safari accessed video on my TV?

  • Can't receive the CANCEL of SIP request through MSPL routing application on Lync

    We have written an application of routing sip messages with MSPL script. It works well except the two things below: It never receives the CANCEL sip request, e.g. when a caller hangs up the call while it is ringing on a lync client; It receives nothi