I tried to send a calendar to the US by changing my Canadian shipping address to that in the U.S. It didn't work

I tried to send a calendar to the US by chandhing my Canadian shipping address to the American address that I wanted to send it to. It would not accept the change. Why?

I believe it's decided by the billing address of your credit card.

Similar Messages

  • My iPhone apps wouldn't open they just blink for a second and the home screen comes back again...i tried installing a free app from the AppStore but it didn't work and also tried resetting the iPhone but ddnt work as well please help what do i do??

    My iPhone apps wouldn't open they just blink for a second and the home screen comes back again...i tried installing a free app from the AppStore but it didn't work and also tried resetting the iPhone but ddnt work as well please help what do i do??

    Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
    First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
    Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
    When I went back to my phone and tried installing them again (still on my computer), it worked!
    I hope this helps, because it was incredibly frustrating. Good luck!

  • I downloaded ios8 on my laptop, and when i was updating it, the screen gave me the logo connect to itunes, i tried to restart it in all the ways, but it didn't work!!!!!! i need a solution, my phone is USELESS and i need it badly!!!!

    i need to know how can i fix my phone, after it gave me the black screen with the connect to itunes logo!!!!!!!! I NEED THE PHONE, and i can't have another one now, it is night!!!!!

    If you are seeing the "Connect to iTunes" logo, then your device is in Recovery Mode, and you will need to restore it:
    If you can't update or restore your iOS device
    iOS: Back up and restore your iOS device with iCloud or iTunes
    Cheers,
    GB

  • Attempted to mail an email with a large attachment file.  One of the addresses was bad.  When my Outlook is running, the Mac tries to send it and shows the progress.  However, when I look in my Outbox the files are not there.  It does show up in the Outb

    attempted to mail an email with a large attachment file.  One of the addresses was bad.  When my Outlook is running, the Mac tries to send it and shows the progress.  However, when I look in my Outbox the files are not there.  It does show up in the Outbox progress section but I can not delete it when it is there.
    Where do these files reside?
    Is there a hidden Outbox??
    MacBook Pro, Mac OS X (10.7.1)

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • While trying to send a message to the receipient outside the domain...

    While trying to send a message to the receipient outside the domain,the server
    sends back the delivery error email message to the sender. this is OK. But for
    some reason the the mail server keeps searching for the wrong recepient and
    sending back the deleivery error email to the sender periodically. In this way,
    it has sent around 450 such messages to my mailbox.
    the mail delivery error looks like this :
    451.. Name Server timeout while searching a.com in DN
    Reporting -MTA;: dns; s-ghq-csc-ocsapp1.tawasul.mil.ae
    Received -From-MTA:DNS;w-anh-sic-004.ANH.mil.ae
    Final Recepient:RFC822; [email protected]
    ACtion: Failed
    Remote-MTA:DNS; a.com
    Diagnostic-Code:SMTP;451... Name server timeout while searching a.com in DNS
    Last-Attempt-Date:Tue, 18Feb 2003 08:34:38 =0000
    solution ???

    Hi,
    This is apparently the week for integration questions!
    There's no such product as "WebLogic MQ". I assume that what your trying to do is communicate with MQSeries or some other non-WebLogic vendor.
    You cannot use a WebLogic client to communicate with MQ or vice-versa. You must create an MQ client using a MQ JMS connection factory in order to communicate with an MQ destination. Similarly, you must create a WL client using a WL connection factory in order to communicate with a WL destination. This advice applies to any JMS vendor, and is quite similar to the way JDBC drivers work.
    Note that if you're communicating with MQ from a client rather than an application that's running on a WebLogic server, then there's often little purpose in using the "Foreign JMS" mapping facilities (in addition, these facilities may not work on the client for all foreign vendors -- I assume it depends on whether the foreign vendor connection factories and destinations are fully serializable/transferable between JVMs). Instead, you might want to consider using the standard JNDI and JMS APIs to communicate with MQ directly (eg, there's no need to involve WebLogic code in this case).
    For information on integration, see the WebLogic doc for [ Integrating Remote JMS Providers | http://download.oracle.com/docs/cd/E12839_01/web.1111/e13727/interop.htm#JMSPG553 ] and, if the "MQ" your refering to in this case happens to be MQSeries, also see the blog post [Integrating WebSphere MQ 6 with BEA Weblogic Server 10|http://ibswings.blogspot.com/2008/02/integrating-mq-broker-6-with-bea.html].
    Note that the majority of MQSeries integration customer apps that I've run across require "exactly-once" behavior, which means they must run on a WebLogic server (not a client) in order to participate in a WebLogic JTA transaction.
    Hope this helps,
    Tom

  • TS1559 I have iPhone 4s, after i updated my software to 7.0.4 my wifi stopped working. The wifi icon at the top is gone. Its annoying that i have to us my data all the time. I've tried the network reset, it didn't work.

    I have iPhone 4s, after i updated my software to 7.0.4 my wifi stopped working. The wifi icon at the top is gone. Its annoying that i have to us my data all the time. I've tried the network reset, it didn't work. My phone works fine, just a lilttle bit slow before i upadated to 7.0.4. And now not only the wifi, the phone itself is slower than ever. I wish i didn't udgrade to iOs 7. There's too much problems. There's this one time that I can't send iMessage at all.

    Hi s.kouris,
    I'm afraid that unless you are able to contact the previous owner and have him wipe the device, or provide you with his Apple ID password so you can delete the iCloud account, you are out of luck.
    With iOS 7, an Activiation Lock was added to deter thieves. This lock prevents anyone but the owner of the device from deleting the iCloud account and restoring the device:
    http://support.apple.com/kb/ht5818
    Unless you are able to reach the original owner and get the device wiped or the iCloud account deleted, you are stuck with a brick.
    Sorry,
    GB

  • Well my iPod is the 2nd generation and i had to update it, but when i did i tried to put one of my pictures as the wallpaper but it didn't work. How can i fix it?

    Well my iPod is the 2nd generation and i had to update it, but when i did i tried to put one of my pictures as the wallpaper but it didn't work. How can i fix it?

    http://support.apple.com/kb/ht3406

  • After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer u

    After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer use my iPad.

    You need to restore the iPad.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If that will not work, you will need to use Recovery Mode to restore.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • My 4th Gen iPod Touch won't open up the apps I've downloaded. I've tried uninstalling and then reinstalling the app and it seems to only be a temporary fix. The reset and reboot didn't work either. Help would be appreciated.

    My 4th Gen iPod Touch won't open up the apps I've downloaded. I've tried uninstalling and then reinstalling the app and it seems to only be a temporary fix. The reset and reboot didn't work either. Help would be appreciated.
    In more specific terms. The apps that came on the iPod like the weather and maps and whatnot have been working flawlessly. It's just when I download an app and then disconnect from wifi it's almost like I'm on a timer until the app stops working. It acts like it wants to open, the screen flashes black then resets to the home pages. I've tried all of the basic fixes, rebooting, reseting, uninstalling then reinstalling. But like in my...long...question, the reinstalling option only seems to be a temporary fix. I just recently downloaded the 5.1.1 udate (I think that's what it was) does that have anything to do with it, or am I just derpy when it comes to iPods?

    Try the other suggestions here:
    iOS: Troubleshooting applications purchased from the App Store
    Then try a restore.

  • I connected to my hotspot on my phone but it took two tries, the first didn't work. The message saying it didn't work won't go away and i can't even shut down. Help

    I tried connecting to my phones hotspot and the first time it didn't connect. I tried again and it worked fine but the message saying it didn't work was still there. After a day it is still there and my computer even died and when it charged again the message was still there. My computer won't allow me to shut down or restart because i can't close the system preferences. What do I do?

    Welcome to the Apple Support Communities
    Hold Sleep and Home buttons until the device restarts, so you should be able to use it

  • I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. What should I do?

    I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. How can I fix it because nothing works?!

    http://support.apple.com/kb/ht1212

  • HT201407 I bought my iphone 4 in the UK and I am trying to use a sim in the UAE and it doesn't work.  It says that the sim is not valid, how can I get this unlocked?

    I bought my iphone 4 in the UK and I am trying to use a sim in the UAE and it doesn't work.  It says that the sim is not valid, how can I get this unlocked?

    You are saying the phone is locked, but then you are saying there is no provider. The two situations cannot peacefully coexist. Contact Apple and they can tell you if the phone is locked and if locked to which provider the phone is locked. People on this board are not Apple employees and cannot get you that information.

  • I have assisive touch so I cannot use power button on top but my phone wont turn on I tried plugging it in  and pressing the home button but nothing is working?

    I have assisive touch so I cannot use power button on top but my phone wont turn on I tried plugging it in  and pressing the home button but nothing is working?
    please help

    - Connect to computer and it it shows in iTune restore via iTunes
    - Then try letting the battery fully drain. After charging for an hour try the reset (both buttons) and connecting to computer and restore.

  • How can I drop the key board from my calendar. The normal lower right key stopped working

    How can I drop the key board from my calendar? The normal lower right key stopped working.

    You can install this extension to make it easier to edit userChrome.css:
    * ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
    The file needs to have this code:
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #personal-bookmarks #bookmarks-menu-button { display:none !important; }</nowiki></pre>
    You can reach the profile folder this way:
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    The file userChrome.css needs to be in the chrome folder in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so if the chrome folder is missing then you need to create a folder with the name chrome.

  • I just got a new iPad3 ...I was trying to download the apps but it didn't work it gives [code error 1009] what can I do .

    I just got a new iPad3 ...I was trying to download the apps but it didn't work it gives [code error 1009] what can I do .

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
     Cheers, Tom

Maybe you are looking for

  • MacBook Pro will not connect to RADIUS authenticated SSID

    We are having problems with MacBook Pros and a MacBook Air not connecting to our wireless network. We have successfully connected hundreds of iPads and multiple other machines. All of the non-working machines are running OS X 10.9.5. The MacBook Air

  • Dynamic Structure in Interface and Forms

    Hallo experts, I am creating XML from the printreport. In print Report I am creating with RTTI a Structure and a Tabletype at runtime. Is it possible to give this type in Adobe Interface as type at runtime. The problem is that the XML looks like this

  • Asynchronous Create Data with Generic Sync

    Hi, We're with the follow error: data container don't loaded .. Anyone knows which is this problem? We're using the parameter OutboundContainer.TYPE_REQUEST in OutboundContainer... MESYBODY is being deleted in a job... For example.. We synchronize on

  • Exporting a double page spread and the PDF ends up blank?

    I've created a double page spread as part of my university portfolio and wish to export this. Although when I export to a PDF the file is blank. I've tried changing everything and watching many videos but I can't seem to find the problem? I using CS6

  • Use of auxiliary class to add attributes to the schema

    I need to add some attributes to the user class. What are the pros and cons of using an auxiliary class versus adding the attributes directly to user? Thanks, Paolo Paolo Tedesco - http://cern.ch/idm