I try to import my cd it loads to fast and only uploads parts of the songs

Hi hope someone can help i recently try to import some new cds but when i loaded them they loaded quicker then usual and only part loaded each song i dealeated i tunes and q time and downloaded them again but made no difference any ideas?

the safest way would be method one from this support article:
How to use multiple iPods, iPads, or iPhones with one computer.
you can still share your music if you wish:
how to share music between different accounts on a single computer

Similar Messages

I purchase songs and only a portion of the song was down loaded?

HELP - I purchase songs and only a portion of the song was down loaded?

Other people have been having similar problems with songs over a number of days, I assume that there has been a problem with Apple's servers.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

Hi, I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while." I rebooted and it didn't fix the problem. I just got

Hi,
I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."
I rebooted and it didn't fix the problem. I just got my iPhone 4s (unlocked right from Apple) several weeks ago.

Siri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
Best of luck.
(Occasionally from Lower Economy, Colchester County).

When I try to import a folder of jpeg files into iPhoto, only some are imported. I get the message "The following files could not be imported. (The file is in an unrecognized format.)" I am running iPhoto '09 ver. 8.1.2 on OSX 10.5.8. They are all RGB.

When I try to import a folder of jpeg files into iPhoto, only some are imported. I get the message "The following files could not be imported. (The file is in an unrecognized format.)" I am running iPhoto '09 ver. 8.1.2 on OSX 10.5.8. They are all RGB.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Hey, I have Final Cut Express 4.0.1 and a JVC everio camera, whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there, please help !

Hey,
I have Final Cut Express 4.0.1 and a JVC everio camera.
Whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there,
please help !

FCE 4.0.1 can only capture DV/HDV which is produced by cameras using Mini-DV TAPES and cameras shooting AVCHD which is a high definition format.
If your camera shoots standard definition on Memory Cards, DVDs or Hard Drives it will not work in FCE.
What is your camera's exact model name and number?

I try to import pictures from aperture in to a new themed project in iMovie (the one with voyages) and it won't let me

I try to import pictures from aperture in to a new themed project in iMovie (the one with voyages) and it won't let me. Any ideea?

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

When I try to import clips from my Sony Handycam HDR-CX150 only non-HD clips show up.

When I try to import clips from my Sony Handycam HDR-CX150 only non-HD clips show up. I have imported HD content successfully many times before. Any suggestions?

iMovie's supported cameras site shows this for your camera:
The supported camera site is here:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
Apparently the import problem was resolved in update 9.0.1 (the latest version of iMovie '11 is 9.0.2) - see the article link in my first post above.
John

I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That's all we know. in English

I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That’s all we know. in English

Bookmark and use this;
Download the '''[https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
This add-on is very simple: on installation, it backs up
and then resets your search preferences and home page
to their default values, and then uninstalls itself. This
affects the search bar, URL bar searches, and the home page.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels. Any easy solution?
Steps:
1. I finished an Aperture 2 (Two) book project and tried to submit it to Apple for printing. At that point I learned (belatedly, obviously) that Apple no longer accepts books from Aperture 2. I don't know how I would have known to even ask if Aperture 2 had been sunsetted as far as book projects go.
2. So I tried to download Aperture 3 ($79.99), only to be told that I couldn't download Aperture 3.5.1 because I was still running OSX 10.8.x. So I read current reviews for OSX 10.9.x, and ...
3. Downloaded and installed the current operating system (about a 3-hours process for me). OSX 10.9.2, here we are!
4. Then I returned to the Apple Store, found, and purchased Aperture 3. [For safety's sake, it would sure be nice to have a .dmg file I could copy and file away. I lost a perfectly legal and good copy of Adobe's Photoshop Elements 3 years ago because I wasn't smart enough to make a safety copy, and when my iMac crashed (fried electronic components), I was left with a copy of the software that wouldn't run, and couldn't be verified as legit.]
5. When Aperture 3 finished installing, I found and imported my COMPLETED Aperture 2 book project, which import seemed to proceed nominally -- the right number of pages, the right content on those pages, that sort of thing -- until I started looking more carefully at the pictures themselves. All of them, about 300 of them, have been imported into an Aperture 3 book project in such a reduced resolution that they are fuzzy at the size the book will be printed. Screen-capture of just one example (at 100% viewer setting):
I don't know what to do at this point to correct the problem, short of going through the entire book project, copy the custom captions (since those go away when you "delete" photo content), delete the photo, re-insert the photo, and paste back the custom caption. Lather, rinse, repeat - ~300 times! An estimated 2-3 hours of additional work.
Or does anyone in this community know either (1) that I did something wrong in the Aperture 2-to-Aperture 3 import (I don't recall being offered any options or choices in the process); or (2) that there is a wholesale one-step solution to my problem?
BTW, I tried to edit my "Product" info, but OSX 10.9.x is not in the pick list. I am running OSX 10.9.2
<Re-Titled By Host>

Frank, thanks for your note. I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it. Too much to ask?
And yes, I upgraded the Aperture 2 Library first. [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.] That step took a number of minutes, but seemed to work fine (no error messages of any kind).
Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so. As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely. You did see the blurry example I included, didn't you? That is what each and every photo looks like.
Text-box content appears to have been rendered pertectly, for the record (including captions).
So, ... is this result something you have heard of before? Do you know of a one-step solution? Or am I looking at an extended picture-by-picture fix?

I have iTunes Match, but some of the music I loaded from CDs and I can see in the iTunes store won't play. It recognizes the album but is playing literally the only 3 songs I don't want to listen to.

have iTunes Match, but some of the music I loaded from CDs and I can see in the iTunes store won't play. It recognizes the album but is playing literally the only 3 songs I don't want to listen to.
How do I get to play all of my music that should be stored either on the computer or in the cloud?

Hi,
Initially your music should be in your iTunes library on your computer. Once match completes its scan, your music will have been matched or uploaded. I suggest that you add iCloud status column to song view. This will tell you what has been matched, uploaded, purchased, inelligible, duplicate or waiting. What is the status of your tracks that are not playing.
If space is not an issue, I suggest that you keep the music on the internal hard drive otherwise you can delete the tracks and play from cloud. In both instances, you should maintain a back up of all your music on a separate hard drive.
Jim

When I try to iTunes Match I get 'Please Sign In Again' error, I cannot access the songs which are visible in the iCloud in my music library on both iPad and iPhone

when I try to iTunes Match I get 'Please Sign In Again' error, I cannot access the songs which are visible in the iCloud in my music library on both iPad and iPhone

Did you try setting itunes to run with administrator privileges?
Since I changed that I no longer have this issue

So, I made the mistake of updating Garageband 09 to GB 11 without exporting my songs first. When i try to open one of them it freezes up and won't respond then the program crashes.... any ideas?

So, I made the mistake of updating Garageband 09 to GB 11 without exporting my songs first. When i try to open one of them it freezes up and won't respond then the program crashes.... any ideas?

stopmotion wrote:
That's what I figured from what I've been reading. Will have to see what the cost might be and if it's a worthwhile investment considering the age of the computer.
You can get a first-gen Mac Pro on eBay for around $300. It can run OS 10.4 through 10.7. Something to consider, depending on the cost of a logic board and the hassle of replacing it. You transfer your existing drives, as long as you have a spare external drive. You would clone your G5 drives to the external drive as disk images, then move the G5 drives to the Mac Pro, re-format them GUID, and clone back the contents from the disk images on the external. I did this recently when I retired my G5.

Firefox Doesn't Load Any Website and Scroll Bar Switches to the Left Side of the Screen??

First let me say this is a work computer that I am using, so there is plenty of virus protection and firewall. I have always used firefox for all my casual internet browsing and work network needs. I recently updated to the latest version of firefox and that is when I started having problems. Almost any web page I go to wether it is my work intranet home page or a common site such as google mozilla will not finish loading the page. If I hit refresh or try to go to another site it gets wierd and the scroll bar switches to the left side of the screen and the page seems to be stuck loading. At this point almost nothing responds to any mouse clicks except for closing the firefox window. If I go to tools --> options it brings up a blank options window with only the "ok" and "cancel" buttons displayed. Help please, I don't like using IE, but right now that is my only option.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; InfoPath.1; Tablet PC 1.7; .NET CLR 1.0.3705; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

There are several reasons why the site may look wrong:
* ''Bad item stored in the Browser Cache'': Follow the steps at [[How to clear the cache]].
* ''Bad cookie from the broken site'': Clear cookies from the broken site by following the steps at [[Deleting cookies]].
* Images are blocked/disabled: see [[Images or animations do not show]]
* Plug-ins are outdated: check for outdated plugins on the [http://www.mozilla.com/en-US/plugincheck/ plugin check page].
* Firewall software is blocking some resources on the page: see [[Firewalls]]
* An extension may be causing the problem: see [[Troubleshooting extensions and themes]]
For other steps to try, see [[Web sites look wrong]]

My iTunes library on my PC only displays part of the library which is on my iPod. Is there any way to load my PC from my iPod?

My iTunes library on my PC only displays "A" and some "B' titles (170) of the 3800+ titles which are on my iPod. Is there any way I can load the songs from the iPod to the PC library?

Sync the music from yur iTujes library on yur coputer to the iPod.
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod.... and follow the instructions.

Why when i try to download a audio cd to i tunes it only downloads half of the cd

why when i try to down load a audio cd to i tunes it only downloads half of the cd

Hi Jolly3jo,
If you are having issues connecting to or downloading from the iTunes Store/App Store on your iPad, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden

I try to import my cd it loads to fast and only uploads parts of the songs

Similar Messages

Maybe you are looking for