I updated iPhoto and now can not burn a cd on iPhoto. I am getting error message: The burn to the SuperDrive drive failed. The disc drive didn't respond properly and can't recover or retry.

I updated iphoto 9.4.3 and now it will not allow me to burn pictures on disc. I am recieving the follwing message:
The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry.
I have tried to do a SMC Reset and PRAM reset and it still will not work. Before the update I was burning pics onto the same dics with no problem.
Any suggestions on what to do?
Thanks!

Hey MGRUBE,
Thanks for the question. I understand you are experiencing issues with burning a disc. The following resource may help to resolve your issue:
Disc Burning Quick Assist
http://support.apple.com/kb/ht1152
Thanks,
Matt M.

Similar Messages

ITunes 11.4 The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry.

27-inch, Late 2009
Processor 2.66 GHz Core i5
8 GB memory
Software OS X 10.9.5
iTunes 11.4
Can not burn a playlist in iTunes 11.4 to a CD, upon completion of the burn operation get error message, "The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry." Receive this message using 2 different external drives that are Apple compatible. 1. is a Pioneer SuperDrive that I had replaced from a previous Mac in a OWC enclosure, 2. the other is a OWC 8X Slim Portable USB 2.0 External. After receiving the error message I can re-insert the disc into the drive and it will mount the disc and it will list all the songs with the correct size, but none of them will play. iTunes then comes up asking me if I want to import the CD, at this time iTunes has a (not responding) status in Finder. Can burn from finder with no problem, only have issue in iTunes.
Background
Last year I took the iMac to the local Apple Store 3 times and they determined the optical drive was defective and replaced it, the last time even replacing the cable to it. When I attempt to burn playlist from internal Superdrive it states it can not burn due to media errors. I have tried Memorex, TDK and PNY media with the same results. I thought purchasing the OWC Slim Portable USB 2.0 External would resolve the issue. If I put a commercial audio CD into the Internal Superdrive it will not mount and will eject it, if I insert the commercial audio CD into the external drive it will mount and play. Now the extended warranty is expired on the iMac and I don't know what next to try.

After multiple attempts to both find an answer to this problem or to fix it myself I've given up and switched to a Windows PC. The same media works just fine at maximum write speed with no special tricks needed. I got my iMac specifically to manage my photographs and burn images for friends and family. It has been nothing but a big disappointment to say the least. To read messages saying I need to lower my write speed or buy more expensive CDs is just laughable. Unless I see something major change I'm sticking with my Windows PC.

What does this mean: The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry.??

Is this an iTunes or disc issue? I have burned music to these disc before.
Error message: "The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry."
Using........
iTunes 10.7
Memorex Music CD-R 40X 700MB 80min
MacBook Pro
Mac OS X 10.7.5
2.4 GHz Core i5
4 GB 1333 MHz DDR3

Not sure. Try this:
Troubleshooting CD burning errors:
http://support.apple.com/kb/HT2955

I've recently changed my password on my e-mail account and now I can't share i photos instead I get a message The email server didn't recognize your username/password combination. How do I change it in i photo pls

I've recently changed my password on my e-mail account and now I can't share i photos instead I get a message The email server didn’t recognize your username/password combination. How do I change it in i photo pls

I'm trying to email from iPhoto

HT201210 Trying to restore ipod and keep on getting error message: the ipod software update server could not be contacted. the network connection was reset

Hello can someone please help? Trying to restore ipod and I keep on getting error message: The IPod software update server could not be contacted. The network connection was reset. Make sure your network is active and try again.

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?

The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing!

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

I get error message "The message can't be sent right now. Please try again later."

I use the information protected by the Do Not forward template and I get error message "The message can't be sent right now. Please try again later."
My Details :
AD RMS Windows 2012 R2
Exchange 2013 CU3
I can't see any errors in the application event viewer
Help me please.

Hi
I would recommend you to run Test-IRMConfiguration -Sender [email protected] and see the results as well.
Grant access to Exchange servers to use ADRMS for IRM. Perform the following task.
Open IIS on ADRMS server – open default Website – Click _wmcs – Select Certification
Switch to content view – right click on servercertification.asmx and click edit permissions ensure that Exchange servers are listed. If not add the exchange servers and the ADRMS managed account and grant editor access to them.
Also refer below
AD RMS: Test-IRMConfiguration Command Fails with UnsupportedCryptographicSetException
http://social.technet.microsoft.com/wiki/contents/articles/16449.ad-rms-test-irmconfiguration-command-fails-with-unsupportedcryptographicsetexception.aspx
Check if the certifications are set correctly - Set Permissions on the AD RMS Server Certification Pipeline
http://technet.microsoft.com/en-us/library/ee849850(WS.10).aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

I am sorry Erickkasner but there is no longer direct support provided for Creative Suite 5.5 installation issues.
You are welcome to post any specific errors you are able to discover within your installation log to this discussion. Since you are using Windows then Exit Code 15 could mean one of the following:
Installer database is corrupted
Update pending to your operating system
Improper permissions set for the Media.db
The installation log file should provide additional insight into the exact error you are experiencing. Please make sure to use the find command to look for the words 'ERROR' and 'FATAL' to locate the relevant error messages.

TS1718 I tried to update, did not work, unintstalled did not work. Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable. Looking for itunes64.msi path.

I tried to update, did not work, unintstalled did not work. Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable. Looking for itunes64.msi path.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I purchased the TV FRIENDS in HD on iTunes (the iTunes store stated with every HD purchase you get the SD version as well) and want to download on my I Pod Classic and get error message the I POD can play this video. How do I download?

I purchased the TV FRIENDS in HD on iTunes (the iTunes store stated with every HD purchase you get the SD version as well) and want to download on my I Pod Classic and get error message the I POD can not play this video. How do I download?

I see there's no answer.
This issue has ****** me off for a long time, and I am fed the **** up with it.
I DO NOT WANT TO DOWNLOAD the Movies and TV shows to every *^&%^$%# Apple device, ONLY the MUSIC!!!
COme on Apple!!! FIx this!!!

Can't burn discs. Error message: The disc can't be burned because the device failed to calibrate the laser level for this media can't be burned because the device

Cannot burn discs. Error message: "The disc can't be burned because the device failed to calibrate the laser power level for this media". Then the blank disc is ejected.

Two main possible causes:
1. Poor media. Verbatim DVD-R work best, burned at only 2x or 4x.
2. Dirty lens. Try cleaning the superdrive with a proprietary CD/DVD lens cleaner that uses tiny brushes.

HT4859 Can't backup my Iphone to Icloud. Keep getting error message, "The last backup could not be completed". Any suggestions?

I keep getting error message, "The last backup could not be completed" when trying to backup Iphone to Icloud. I have plenty of storage space. Phone is plugged in, connected to WI-FI & is locked. Does anyone know what is wrong? Thanks

HELP! Is there anyone out there who knows how I can fix this????
Thanks!

TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

I cannot open itunes. Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
What do I need to do so I dont lose all my loaded music, etc.?
Thanks

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

Trying to restore/update 3rd gen ipod touch - keep getting error message - THe ipod touch could not be restored. An unknow error occurred (-1). Please help.

Please Help..
Trying to restore / update ipod 3rd generation - keep getting error message - The ipod touch could not be restores. An unknown error occurred (-1).

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. in that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I updated iPhoto and now can not burn a cd on iPhoto. I am getting error message: The burn to the SuperDrive drive failed. The disc drive didn't respond properly and can't recover or retry.

Similar Messages

Maybe you are looking for