I updated my iPhone 4S and it completely restored my phone and now it says theres no sim card in it when there is
My iPhone cant do anything without the sim
Does the message say there is no VALID sim in the phone or that there is no sim at all ?
Similar Messages
-
I just updated my Iphone 3GS from 4.3.3 to 6.1. Now is says that my SIM Card is not supported by my carrier. I called Rogers and he says to restore my phone. But I can't get there is it won't recognize my phone. Help!
Insert a SIM from a supported carrier.
Where did the phone come from, it sounds like the device has been hacked or jailbroken to be unlocked and updating has re locked to the original carrier. It is also possible that the SIM simply needs to be reseated or replaced. -
I upgraded to iOS 5 on my 3GS without any issues but now everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? with the options of cancel, continue restore and delete back-up. what happens if i click delete back up?
I'm not getting the message anymore!
What I did:
1.- Went to preferences in itunes/ Devices --> erased the corrupted backup (there were two backups)
2.- Upgraded to iOS 5.0.1
Done!
PS: Maybe upgrading solves the problem without erasing the corrupted backup -
I had to restore my phone and before I did it I bought a ringtone and now I do not have that ringtone. How do I get that back without having to repay for it?
Call iTunes support and see if they will re-grant it back to you. Shouldn't be a problem, they have done it for quite a few people I know.
1-800-694-7466 -
Downloaded newest iphone 4 software when download was complete i tried updating the phone and an error came up phone wont update and has gone completly blank. what do i do?
the error message is (-1)
-
I Upgraded the ios to 8.3 last night For iphone 6 plus. Since morning today there is no service and no cellular coonection. The phone connects to wifi though.
I Checked the sim card in my iphone 6 and it could detect the signal/ network, so sim card is fine. Seems an issue with 8.3 for iphone 6 plus.Greetings Anuvratg,
It sounds as if you are having difficulties getting your iPhone to connect to your cellular network since updating your version of iOS to 8.3, is that correct? I would suggest that you troubleshoot using the steps in this article -
If you can't connect to a cellular network or cellular data - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L -
.
The following gives instructions for that error message, including to contact Apple support if you've tried all of the steps shown and waited 24 hours: http://support.apple.com/kb/TS4268
-
anyone having the same issue?
I am. And the people at my local apple store spent 3 hours trying to figure it out. now I'm stuck with a brick till I can get it figured out
-
I updated my iPhone today over wifi. It downloaded 6.1.3 completely and started then installed it. After the install all it does is show the connect to iTunes screen. What did I do wrong and now do I have to completely restore the phone?
Next question.... I did an iCloud save point earlier today so in theory everything should have been saved and the restore won't be a complete loss right? Please tell me my pics aren't gone.....
Thanks for the help. -
I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??
I don't follow your instructions... mine goes Settings->General->Cellular and from there it's just on/off options for Cellular Data, Enable 3G, Data Roaming, etc. Or I could go Settings->General->Profile APN Carrier Settings but when I click that it just shows as verified but no Visual Voice APN or MMS Settings. If I click More Details it goes to Signing Certificate which has a bunch of parameters for unlockit.co.nz but I am unable to change anything.
I just updated my iphone 3GS to IOS 6 and my internet (wifi and 3G), voice and text all work, but the only thing I can't do is send/receive pictures via text message. I am using At&t prepaid sim. I tried turning off the phone completely but I'm trying to avoid a complete restore.. at least until I can understand the problem better! Any help would be appreciated!
Thank you! -
I'm updating from my iPhone 4 to the iPhone 5 and have been 'restoring' for 2 hours now and the progress bar still states I hae 6 hours remaining. Will it really take this long? How long should a restore take? It's a 32gb device. Thanks.
I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems. -
Error 16 when I update my iPhone 5s showed me stuck on recovery mode and whenever I got error 16 Restore thing is the problem?
Hello Meysam321,
After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Resolve iOS update and restore errors - Apple Support
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?
You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.
-
Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
RogerHi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger
[email protected] -
I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!
Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/
Maybe you are looking for
-
Text Variable With Replacement Path : supported in Webi 4.0 or Not.??
Hello to All WebI Gurus, We are on BO 4.0 We are building WebI report on top of Bex query using the BICS connection from IDT. Our BW query is having some Text Variable with processing type "Replacement Path". Also its having fiscal year period in fil
-
XML validation: how to check ALL validation problem for XHTML
I have a lot of documents in HTML format (not very good) that I would like to convert in XML (XHTML). I know it is not so easy and I would use this strategy in a Java program: 1. Try to check the well-formness and validation with a XML parser (SAX or
-
WLC 2106 CSR Request For Web Authentication
Greetings, ive been following the guide below in order to replace the web auth certficate for guest users on our WLC2106. http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml Does anyone know of a metho
-
Env Variable setting for Oracle 11g windows 2003 R2
Hi , While installing the Oracle 11g on windows 2003 R2 getting error while running the prerequsite steps for installtion.failing the env variables path. Please guide us to set up the Environmental variable for the oracle 11g installation. Thanks..
-
hi all , my scenario is ECC--XI--customer using synchronous communication. I want customer code by java to test my scenario . can anybody help me ? thank you .