I updated my ipod to 1.02 and now songs skip and voice speaks at odd times. Any solution?
Also, sometimes it works for a while okay. I seem to be able to get it to go wierd sometimes by hitting the volume button down. Other times out of nowhere, even when off, the voice starts speaking about my tracks, authors, and playlists, etc.
Okay. I hope I can remeber all my steps exactly because I fixed my own problem...with absolutely no help from Apple. I opened itunes. I connected my ipod touch to my computer. On my itunes page that shows my songs in the upper right side under the search library box there is an itunes button and since I am connected there is an ipod button. DO NOT CLICK THE ARROW in the ipod button...just click in the mail part of the button. On mine it opened to a summary page that gave info on my ipod. The menu bar has Summary, Apps, Tones, Music and more. I clicked on the Music button. I chose to Sync the entire music library. That replaced what was on my ipod but what was on there was going to be put back on so I was okay with it. I then clicked the Sync button on the lower right side and it sync'd and all my songs are on my ipod again. I hope this might help someone else. Good luck.
Similar Messages
-
I have updated my ipod touch to ios5 and it is saying that the device is not registered in apple developers program.I have a back up fle in itunes and itunes is not prompting for restore.how can i restore my pod?pls help me to restore my ipod .am worried as it my new ipod and am not able to restore it.pls help.
i have done that .:(..PLs help me restoring it to older version.though i have a back up file.in itunes..am not able to restore it.as itunes is not asking for resotre option..pls help me
-
I updates my iPod before syncing it and lost all my song how can I see what song i lost?
I updated my iPod before syncing it and lost all my songs how can I see what songs I lost?
From your backup that is in iTunes or in iCloud or resync them from your computer.
-
Before I updated my iPod I had all of the songs to an album that I bought on iTunes. After I updated my iPod I only have 5 of those songs from the album. I would like to know how I can get the rest of the songs cause I already paid for the album and I went on my computer and it said that I have to pay for them even though I already paid for the whole album. So what do I do?
Sync with the same computer iTunes that you normally sync with.
-
Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade. Can you help please?
I too had the same issue. This is how I resolved it http://www.parkhi.net/2011/12/error-8288-ipod-touch-upgrade-ios-31.html
-
I updated my iPod Nano 7th Generation, and it wiped my iTunes library. I no longer have my playlists or movies. I was able to recover my music, but the many, many playlists I had, I could not recover. Is there any way I could recover them?
Hello apbvieira,
It sounds like your iPod Nano is not recognized in iTunes anymore after a recent update. I recommend the following article to help you get that in order named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
1. Start with the iPod Troubleshooting Assistant
If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
This step will get you started, but there are additional steps in the article if you need them.
Thank you for using Apple Support Communities.
Regards,
Sterling -
I tried to update my ipod touch 4 gen and it automatically shutoff and said connect to itunes on the screen. I did. it says it found an error restoring ipod, what do i do now to resttore my ipod back to working and functioning condition?
Hi marty292,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy -
In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I have just updated my ipod touch (third generation) and it has taken off safari, it has just dissapeared, what do i do
Could be two things:
- It is on a screen and you can't find it. Try using the Spotlight search feature and search for Safari.
- Somehow the restriction for Safari got turned on. If on Safari is hidden and will not appear on the iPod even via search. Go to Settings>General>Restrictions.
- Also try resetting your iPod?
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears. -
I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?
This has worked for some others.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i updated my ipod the other day and since i have been unable to open any apps that connect to the internet, its says "operation could not be completed. invalid argument". anybody help please?
Have yu tried the standard fixes:
- Reset the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Restore the iPod via iTunes, First from backup and if problems persist, restore to factory defaults/new iPod. -
I was downloading updates for Ipod touch 2nd gen and when the process was to the processing files point the screen changed and I wasn't given any idea as to whether the process was complete or not and if it was what was to be done next. I needed to reset the Ipod and now I am wondering what to do . Spend another Hour downloading and whatever amount on processing files and end up where I am now . Whats the next step in finding out what to do? This was the second attempt to do this with the first try happening the same except I am not sure how long the processing files part was.. Any suggestions as to what to try will be greatly appreciated.. Thanks
Likely a batter problem since high temperatures destroy a battery. I wold make an appointment at the Genius Bar of an Apple store to see what they say. It is free except for your time.
-
Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Errors related to downgrading iOS -
Hi i cant update mi ipod touch its saids that the version 4.2.1 its the current version any tip ? thanks
if your ipod has only 8GB then it is an icompatible old model ( 2nd generation iPod ).
IoS 4.2.1 on it indicates that it is a too old model.
Only 3rd and 4th generation can be upgraded to iOS5.
Maybe you are looking for
-
In SD point of view , that r things we can check in Screen MD04
In SD point of view , that r things we can check in Screen MD04 Key areas and feilds in MD04 to look after for SD and PP integration and respective roles of consultants.
-
Hi, has anybody experience with installing portal server 7 on fedora core 5? I know it's not supported, but is it possible to install it somehow? thanks
-
Is there a way to rename multiple desktops that have been created?
Is there a way to rename multiple desktops that have been created?
-
Secure PDF from Crystal Reports
What's the best way to secure a .pdf from Crystal Reports? I'm using reportdocument.exporttostream(ExportFormatType.PortableDocFormat) in vb.net(VS2005) to create an IO.MemoryStream which is then sent via email. I'd like to add a password to this fil
-
Backup disk contents wiped and name changed
I have a LaCie Starck which I use - and have happily used for several years - as my Time Machine backup disk. Recently it has mysteriously had all its contents wiped and has changed its name to "My Book". What has happened? How do I restore its pr