I updated my software last night and when I came back to the computer its says there was a problem and I need to restore factory settings. How do I get my photos and videos off the phone

I plugged in my phone to update to the latest software. After a while, I went back to the PC and it said there had been a problem and that I needed to restore the factory settings.
I am worried that I will lose all the photos and videos that I have on the phone. How do I get them off.
When I now plug the phone it the screen looks like when you first get it - i.e. itunes logo and asking me to plug in.

If the device has been used as designed, the pics and via taken with the device would have regularly been copied off to a computer.
The first step in the update process via iTunes on the computer is a backup.
Restore the device from the most recent backup.
If data is lost, then it is merely the fault of the user for not backing up the device or saving their data regularly.
Once the device is in recovery mode, the ONLY option is to restore.

Similar Messages

  • HT1657 I rented a movie and when I go to play it, my IPAD says it cannot open.  It has not been previously played.  How do I get a refund?

    I rented a movie and when I go to play it, my IPAD says it cannot open.  It has not been previously played.

    iTunes Store Movie Rental FAQ - http://support.apple.com/kb/HT1657

  • ICloud backup, the error msg says "There was a problem enabBackup."  Now what do I do?

    I just restored my iPhone 4S because I was having trouble with the battery draining too quickly.  I got everything back, but when I go to turn on iCloud Backup, I get the error message, "There was a problem enabling iCloud backup"  No explanation, no pointers of how to correct it, no nothing.  Ideas to enable iCloud Backup?

    Hello slm22125
    If iCloud is not creating a back up, check out the following article for troubleshooting options.
    iCloud: Troubleshooting creating backups
    http://support.apple.com/kb/TS3992
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • When I connect my iPhone to iTunes its say, "There Is A Problem with your iPhone." Please can you assist me in fixing the problem

    How do I fix this?

    What does it say other than that?  That's a very vague description.

  • The error message says, "There was a problem downloading 'X'.  You do not have enough privileges for this application."  Any suggestions?

    I have recently added an iPhone 4s, and cleaned out the hard drive of my eMac to use solely for iTunes, but now it will not let me download iCloud items from iTunes Match.  Do I need to change settings on the iPhone, or did I erase something I shouldn't have from my hard drive?

    I should have explored other threads before writing this, as I found the answer elsewhere. Turns out, the folder I was saving the podcasts to had been changed to 'read only'. Changed to 'read and write' and podcasts download successfully now. I'm not sure how that changed during the upgrade, but no matter, I'm back at it now.

  • I cant download ios 6 from itunes its says there was a problem in downloading software

    i cant download ios 6 from itunes its says there was a problem in downloading software

    i have a same problem bigfoo.. i mean whenever i do it...downloading goes halfway but after that it says an error occured

  • Having problems accessing any apps on my iCloud. Set up and signed in successfully but then when I click on an app it just says there's a problem but doesn't say how to fix it. Please help, am very new to this!

    Hi
    I am very new to updating my iPod touch and this is the first time I've used the iCloud. However, I am having problems accessing any apps on my iCloud such as photos, reminders etc. I've set it up on my iPod touch successfully and I can sign in on my PC. However, when I try to access any of the apps it says there was a problem. It doesn't tell me how to fix it or what the problem is.
    Is anyone able to help?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • I'm trying to download an episode of Dr. Who but it keeps telling me it's going to take 24 hours, and then it crashes and says "there was a problem downloading an unknown error occurred 50.  Any Ideas on how to fix it?

    I'm trying to download an epsiode of Dr. Who, but the download is saying it will take 24 hours, and then it stops and says "there was a problem downloading; an unknown error occured (50).  How can I fix this?  I don't think it's my internet, it's really pretty fast. 
    Thanks! 

    Try fixing up the validation issues...
    http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.stereogol.com%2Faudi o%2Fwimpy_podcast.php
    Not promising it will help, but it's worth a shot.

  • HI , yesterday my iphone 4 running on 5.1 died on me completely,so i placed it to charge and walked off and when i came back about 3 hrs later it was still not charging. The entire night i tried to reboot it and nothing works itunes wont even recognize it

    HI ive been phonless since night and im really worried, wondering if anyone can give me some advice! so yesterday my iphone 4 running on 5.1 battery died on me completely,so i placed it to charge and walked off and when i came back about 3 hrs later it was still not charging. The entire night i tried to reboot it and nothing works! itunes wont even recognize it on my mac!:(please help!

    Try a reset by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.        

  • I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures??????

    I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures??????  When I have 500 pictures on it!!!!!  Im soooooo mad I did the update! Worst decision ever!!!!!!!!!!   I am SOOOO ready to leave the IPHONE alone- maybe throw it in the river or lay it on the train tracks.   Its been NOTHING BUT TROUBLE since the update!

    Just to be clear: Tap on the Photos app to start the app. Then tap on Albums at the bottom of the screen. You might have several albums but only one is named "Camera Roll." Are there photos in that album?
    If there are NO photos in the Camera Roll album there are no pictures to import. The remaining albums might have come from a sync with your computer or they might be your PhotoStream.
    If there ARE photos in the Camera Roll album, connect your iPhone to your computer and start your camera application on the computer. Your phone should be recognized as a camera.

  • I've iPhone 4s, and I am trying to update it to iOS 5.1 I've downloaded the software from iTunes, but when I click to install it, it says: "There was a problem downloading the software for the iPhone 'Donnbjj1's IPhone'. An unknown error occurred (1480)"

    I have an Iphone 4s 32gb and i'm trying to update it to ios 5.1. i've downloaded the software from itunes but when i click on it to install it to my actual phone it says: "There was a problem downloading the software for Iphone 'Donnbjj1's Iphone' . An unknown error occurred (1480)."

    iOS: Resolving update and restore alert messages
    For error -50: See error 13 and 14: 
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library  it says There was an error opening the database for the

    Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library  it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

    Try starting Aperture with the command and option keys held down.  You'll get 3 options.
    Try each, starting at the top, in order, checking after each to see if it fixes the issue.

  • I made an iMovie project with a bunch of stills and when I came back later today they had turned black like they weren't there. What's with that? How's the best way to fix it?

    I made an iMovie 10.0.4 project with a bunch of stills and when I came back later today they had turned black like they weren't there.
    Like this:
    When I play them they're black as well.
    Normal Still:
    "Missing" Still:
    What's with that? What's the best way to fix it?
    Thanks.

    Hi
    Magic solution - NO
    Some thoughts - YES
    Is the iPhoto Library still where it was previously (or on external Hard Disk - now turned off) ?
    One approach might be to - Repair iPhoto library (but this takes hours - so try below first)
    Trouble-shooting guide
    When iMovie doesn't work as intended this can be due to a lot of reasons
    iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    Creating a new User-Account and log into this
    This forces iMovie to create all pref. and cache files new and error free
    Event or Project got corrupted - try to make a copy and repair
    a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
    version miss match of QuickTime Player / iMovie / iDVD
    preferences are wrong - Repair Preferences
    other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    USB-flash-memories - usually do not work
    Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
    iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
    This You do by
    First -  close iPhoto
    Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
    Thirdly - now select all five options presented
    THEN - WAIT a long long time (>20 hours are not strange)
    free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    Screen must be set to million-colors
    Third-party plug-ins doesn't work OK
    Run "Cache Out X", clear out all caches and restarts the Mac
    Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

  • My nano was working just fine and I had been using it as my fitness watch ( music). I plugged it in to charge and when I came back to unplug it, it was so hot that it burned my hands.  I continued to unplug it and that was the last time it worked.

    My nano was working just fine and I had been using it as my fitness watch ( music). I plugged it in to charge and when I came back to unplug it, it was so hot that it burned my hands.  I continued to unplug it and that was the last time it worked.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.."  HELP!  Not sure what my settings shoud be..

    I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.."  HELP!  Not sure what my settings shoud be...
    I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

Maybe you are looking for

  • PDF problem when used in Pro/ENGINEER

    Since the company I'm with now does not use separate part numbers for every different part, and a lot of times the description is the same (i.e. "TUBE"), many times everything with the description of "TUBE" comes in on the parts list in the same row

  • Receiver Determination conditon issue

    Hello All, I have a scneario where I need to send only Division type A, scenario is IDOC to File IDOC Filed1 <J>   Field1 <A> Filed1 <C> </idoc> When I see in SXMB_MONI I see all the records in the payload in receiver determination (Where the receive

  • Smartforms, Output device WA_EKPO-NETPR not defined., ME9F

    Hi I am creating a form of purchase order, I am trying to have the price printed, but I have the following message when I try to print: Output device WA_EKPO-NETPR not defined. Message no. SSFCOMPOSER011 Diagnosis The output device specified is not k

  • Bandwidth percent - ios xr

    hi everyone, in a policy map - when you configure your classes - ex class 1 bandwidth percent 25 class 2 bandwidth percent 25 class 3 bandwidth percent 25 class 4 bandwidth percent 25 - will this negate p2mdrr or mddr? ie. have I configured the polic

  • Functional spec clarification

    Hello gurus, I need some tips in analyzing a functional spec. I really need to know what all information I definitely need to have in a functional spec so as to start writing a technical spec. This is how my func spec looks like: It has few KPI's lis