I upgraded my iPAD 1 and now it will not connect to my wi-fi. It does not ask for password. It does recognize wi-fi name. I have rebooted, unplugged router, 'forget network', and reset network. Still will not connect.
I have no idea what to try next. Please help!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
Windows operating system; Firefox is up to date.
I do believe that it IS a Firefox problem. I didn't have the problem before updating Firefox. Check out this site from Yahoo Answers. It's the same problem, but the advice is no longer accurate: The question was posted years ago, and the "fix" is for an outdated Explorer version. However, the Asker poses the question quite well.
http://answers.yahoo.com/question/index?qid=20080506073911AAhE2Ye
Please let me know if you find a fix. Aggravating!! -
Mail keeps asking for passwords; incoming server in iCloud is dimmed, not available
Mail on all accounts (iCloud, gmail and comcast) keeps asking for passwords; many Internet sites that used to be filled in from Safari are blank and require password. In Mail accounts, the incoming server for MobileMe/iCloud is dimmed. I can check mail on the Internet but it's kinda handy to have it delivered to the iMac. What's up?
Got the axect same problem. HELP!!! Using me.com still tho. But I want to use mail again!!!
UPDATE!!!
Okay, it is working now. I removed my account in Mail and upgraded to iCloud. Now it is working. -
I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?
you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.
-
Im traveling abroad and while I have refused the IOS7 upgrade my iPad is now lock. The display only reflecting iTunes and the USB cable images. Now I can not access my photos and or my email. Anyway I can reset without connecting to my computer?
penny175 wrote:
Anyway I can reset without connecting to my computer?
No. Not without access to a computer running iTunes. You do want to use your own computer so that you can restore from your backup and sync your own content back from iTunes. -
HT201412 ipad screen will not slide. Tried resetting and a factory reset but still will not work.
ipad screen will not slide. Tried resetting and a factory reset but still will not work.
I have the same issue on my Ipad Air. Screen will not rotate, I have reset the settings, still only displays in the portrait mode. A couple of interesting things though. a couple of days before it completely locked up into portrait I would have to turn the ipad off and hold it in the orientation I wanted because it would not change orientation after I was in an app.
Also, I just played a Netflix video and it was in landscape mode.
Any ideas?
Thanks, -
Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that. I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house. For some reason the range is low and speed veru disappointing.
I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed. Please HELP!No silver bullet........but my suggestions may drive you in the right direction.
1. Unplug the power cable from the TC and wait 10-15 minutes before powering back up. Seriously wait!
Proceed to #2 if this dosen't help.
2. Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem.
2a. Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch) wait for all the modem lights to come on EXCEPT activity.
2b. Connect ethernet from modem to TC, and plug in the power cable to TC.
Proceed to #3 if this dosen't help.
3. Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
All really simple to do....if you need additional help let me (us) know. -
I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?
Settings > wi-fi then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
Now at the top tap on "forget this network".
After that, the iPhone will think your home network is a new network and will ask you for the password to connect. -
Want to us my time capsule model A1409 as only backup. 2 TB hard drive.
Already have Verizon wireless router. Do not want to use Time capsule as router, only back up for iMac.
Do not know which cable port to use in back of time capsule to Ethernet port back of my iMac.
And also it is asking for password for the server John Garland's Time Capsule so Time machine can access it..
Have tried all of passwords can think of and none work.
Held the reset button for one second on back of capsule and do not see if anything happened.
What a conundrum.
Appreciate any help to get this working.
Thanks,
John RI have a 2TB Timecapsule and really only use it for Time Machine backups. But the Wi-Fi side is used to sync my iPad at times.
Mine is wiredup thus;
Eth cable from iMac to modem (not the WAN port should you have one), then eth cable from modem to T/Cap in the WAN port (bottom port with an O sign above it)
I believe when its connected up you may have to set up a wireless network. Follow the instructions to set up Wi-Fi and Network
and then give it a password. The WiFi icon should appear in the menu bar where you can switch it on or off.
Its been sometime since I set it with the help of Apple Techs so I might be a bit rusty.
Alan -
I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password. I have tried my own IMAC password but to no avail. The printer also shows a pop-up box stating 'awaiting authentication.
Any help appreciatedYou are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it. -
How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive. -
I have set up my ipod touch too use the internet which is sky its been working fine but now when i try it say unable to join network and there is a padlock beside the sky wi fi thing when i tap that it asks for password and i cant remember the password is there anything else i can try
You can guess the passwoard. That is all you can do.
You can enter the router etup and change the password. You may have to rese the whole router. Look at/download the manual for the router to find out how to do that. -
ITune store keeps asking for password and will not download
Updated the iTune to the newest edition, 11.0.3.42. Now, when I try to purchase new videos or music, the itune store will repeatedly ask for password, even though I put the password in correctly, the box will pop up again asking for password as if I have not input the password at all. It will not finish the transaction or download. The only way I can purchanse anything is to sign out of iTune store, sign back it and make the purchase. Anyone else experience this problem?
I downloaded and installed iTunes and it seems to have fixed the problem:
http://www.apple.com/itunes/download/
I should note that my problem was on Mac. -
When I select the Airport Express as Remote Speaker in Itunes I just see trying to connect and it can't connect.
I changed my password on the Airport and I don't see where I can put in the new password in Itunes.
This problem is on my Imac. On my Mac Pro a window came up asking for password to connect because it was the first time.
I can connect on the Mac Pro but not my Imac.Update on my problem connecting in Itunes with my Airport Express. Not sure if anything I tried made a difference
but I finally got the Pop up window saying this device requires a Password. I entered the password and I can once again use the Airport Express as a remote speaker. -
Keeps asking for password when trying to purchase photobook and will not let me proceed - help!
Iphoto will not let me purchase photo book. Keeps asking for password . Help!
What iPhoto are you referring to? iPhoto for iOS or iPhoto on your Mac?
Maybe you are looking for
-
New apple id for 13 year - keep progress on one free app?
My son recently hit 13. Up until now he's been using my apple ID for everything (facetime, purchases) but I figure now he can have one, it's best to give him his own apple ID ASAP as he's not going to want to use mine when he's moved away from home,
-
How do I set up preferences of opening up garage band?
Hi guys...every project I start I want to have it "time" mode, have the "loops" on the right side of the screen not on, and "lock automation curves to regions" checked. I realize this is a simple 4 to 5 clicks, but was wondering if I can say, "everyt
-
When I use the shortcut in CS 6 "shift + delete" the dialog box does not show up the selection actually disappears. Does anyone know what I am doing wrong or where to find the content dialog box without the short cut.
-
Hi All, Wls 6.1 uses ANT extensively. Can any body pls tell me where can I find docs on Ant and build syntaxes for weblogic apllications ? Or is it the same that is available from Apache ? TIA, Sudarson
-
Mail not receiving incoming mail from gmail account
I have an imac with 10.5 that has suddenly stopped accepting email in one of my gmail accounts, but still gets it from another. I synched my imac with my ibook earlier today. The ibook has the same problem accepts mail from the account that the imac