I used to i could burn cds now it says no cu burn system found, i used to i could burn cds now it says no cu burn system found
i used to i could burn cds now it says no cu burn system found, i used to i could burn cds now it says no cu burn system found
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.
Similar Messages
-
I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found. Would you like to locate it now?" It happens on each tune I select and a "?" appears beside the song. Does this sound familiar to anyone?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
Dear Apple,
I have an iPhone 4 32GB (black), i bought from softbank, japan. Now, I have recently finished a graduate and i'll comeback home in Laos. But i can't continue to use my iphone.
Could you please help me to unlock my phone so I can use it with other carrier Sims. I would appreciate it.
Please let me know if you could help me out. Thanks again.
<Edited by Host>Like ckuan said, Apple does not unlock iPhone; your carrier does, provided that the carrier offers this service.
Unfortunately, SoftBank does not offer authorized unlocking of iPhone.
Your best option is to sell this phone and buy another iPhone from the carrier of your choice or better buy a factory unlocked iPhone so you would be able to use it with any compatible GSM carrier around the world. -
I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?
Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.
-
i have bought a iphone 4s from uk. but i face problem in using sim on it. this is updated with 6.0.1 version. this phone also have a chip in sim plate. now how could i use it?
Where did you purchase in UK and is the iPhone carrier locked ??
-
When I started my new iPad 2 I could not start from a previous backup because the os on the new iPad is not the latest 7.x used to backup the previous ipad2 to install the new os I had to start the iPad as new. But now I cannot backup from the previously backup ipad
Hi there,
You may find the troubleshooting steps in the articles below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/ts2529
-Griff W. -
Burning CDs to a network library that anyone in house can use
I would like to leave my iTunes library intact on my computer, and burn all my CDs to a network drive (using Apple Lossless). The goal is to have an original copy of the music stored, and have all our CDs accessable so that anyone in my family can import selected CD music into their own iTunes and then to iPods for listinging on the go.
How can I do this? I'm just curious on how to burn the CDs to the network drive, and then be able to add to that network drive, while not destroying my own laptop's iTunes library.
Thanks in advance.I'll answer my own question here.
I just created a new login account on my laptop, logged in with that user, started iTunes and changed the settings to use the network drive for the iTunes Media Folder Location. I'll just use that login account to burn all the CDs to the network drive, and then anyone else can see them. -
lost my phone. reset my icloud password, now its asking me to sign in from the phone before i could use it on the web, and i need to access my icloud account from the web. what shall i do ?
Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
i have lost my phone. reset my icloud password, now its asking me to sign in from the phone before i could use it on the web, and i need to access my icloud account from the web. what shall i do ?
Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
Help? Time Machine could not complete the back up due to iMacsparsebundle is already in use??? This is the error message I am getting now with my Time Capsule as the back up device. Any suggestions?
Pull the power cord from the back of the Time Capsule
Wait a few minutes
Push the power cord back into the back of the Time Capsule
See if the Time Capsule will back up now
If not, see #C12 in this document:
http://pondini.org/TM/Troubleshooting.html -
I have two iPhones, one is a 4s and the other is a 3g. I have not used my 3g in some time now. I recently restored it but I cannot use it without a sim card, it says i have to "activate it." I cannot place my iPhone 4s sim card in it (too small), and i do not want to get a new contract or sim card for an iPhone that i do not ues very much.
Thanks for your help, but i cannot borrow a noral sim card now, my family has all up graded to iPhone 4s's, i have done this before, but one of my family had the same type of iphone so i could use theirs. Now i am the only one who still holds on to their old phone... I am not sure about buying an adapter...
-
I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.
Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
Thnaks, for anyones ideas on how I can get this working again.....First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme).
Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external. -
when I try to burn my slideshow.mov to a dvd disc, it will burn but when i put it in the dvd player it says 'disc error'. I have burned it thru iDVD before but forgot how to do it and it won't do it now. The slide show is on my desktop
Rather than burn directly to disk follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums. -
Hello, I am running Mac OS X 10.9.3. Someone has been pestering me with unwanted e-mail. There used to be a feature that allowed one to "bounce" unwanted mail back to the sender, a message saying they have reached a wrong address. How do I do that now? TYIA
It is not available in Mail any longer (for quite a while, now).
You can add a rule to have Mail mark them as junk, or you could possibly log onto your Email provider's web site and block that address. -
Hi anybody,
I have a number of cds referring to X-rays and MRI scans taken over the last few years, and I used to be able to open them on my old PC, but having recently migrated to an imac none of these will open. Any suggestions to a complete non-expert in the mac world would be greatly appreciated.
Ray in GalwayAnother thought, if they're just typical image files like jpegs, or PDFs or some other universal file format. Have a friend with a windows computer copy the contents of the CDs to an external media source (flash drive, external HDD etc) and copy them to your mac.
If they were burned by the medical staff to be ran as a program then they may not be comptable with Mac OS. If this is the case see about having a friend copy the images for you.
Maybe you are looking for
-
Hi Experts, There is a problem in my query output. I have a CKF for sales documents number created with replacement path which gives the correct count of number of Sales documents. But the req here is to create two more counters which will be countin
-
Installation ColdFusion MX 7.02 on SUSE Linux 10
I tried to install ColdFusion MX 7.02 on SUSE Linux 10 with Apache 2 web server and I have this very unusual error. .. ./coldfusion-702-lin.bin Preparing to install... Extracting the JRE from the installer archive... Unpacking the JRE... Extracting t
-
Camera RAW Update, Bridge default settings
I just updated Camera RAW. I use CS6, but now the Bridge is set to open in PS CC by default and CS6 is not even listed as an option. How do I get CC back off and CS6 set back to default? Thank you!
-
Should I Optimize for "Memory" or "Performance" in Preferences?
I've been rendering the timeline prior to export and finding that it renders in just over an hour for a 30 minute project. Then, almost miraculously, the MPEG2-DVD export only takes about two hours or so. This is with "Maximum Render Quality" selecte
-
How to insert Google analytics in BC website
Please can you assist with how we can insert our Google Analytics in our clients BC websites thank you Michelle