I've bought a new USB flash memory. I plugged it in the USB port then a message come out: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.... Please help...

I don't know what to do. I plugged that USB in both ports but the same message came out. I charged my laptop and the same thing happened again. The surprising thing is that I tried plugging the USB in my cousins laptop (Macbook Pro) and it worked!!! but not with mine. The USB flash memory made by PNY. Please help...

There are two types of USB 2 devices - low power which consume 100 milliamperes or less from the USB bus and high power which consume up to 500 milliamperes. Your flash drive is probably a high power device and is overloading the USB bus of your computer. (Some notebooks can support only low power USB devices.)
I know that my MBP's USB ports support high power devices but I've come across reports that not all high power devices will work on the MBA and that might be the case for your flash drive. My guess is it has a large capacity? 32GB or more?

Similar Messages

I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."

I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELP

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." HELP!

When I plug in my son's iPad I get this message "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I only have one charger for this iPad all my other chargers are for iPhone 4s. I have pluggerd it in different outlets around the house and the iPad will not charge. When I plugged it on my lap top to back it up it gave me the warning message. HELP!!

I have the same problem on my Air. The message first came up while my iPhone was connected to it for some time. Since then, it pops up ALL THE TIME, whithout anything being connected to the USB port, at what appear to be random intervals that vary between about one hour and a few seconds. I have tried resetting the SMC and the PRAM, but no results. A quick search revealed that thousands of users are facing this problem, but Apple has yet to provide a solution. Please help!

New iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?

I have a new iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?

If you just bought the iMac and the Sjuperdrive take the superdrive back and get a refund. The by any other brand external DVD drive that connects by USB and try that. Most come with a Y USB cable to allow you to connect to 2 USB ports to supply enogh power to the drive IF Needed.
Or take both back and get a refund on both, you have 14 days to return it no questions asked, and buy another iMac and some other brand external DVD drive.

I keep getting this message : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.

I keep getting this mesage : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
I need to charge my phone but it's not letting me!! Please help!

Solution may be found if you search in the "More Like This" section over in the right column and in the article - http://support.apple.com/kb/HT1151.

HT1212 i get this message? "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."

Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled?
What do I do?

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. One symptom of a bad Lightning cable is the message you are getting.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u

Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any help

If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.

I have message in screen ,Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.

i fix my iphone 5 to syn with my macbook in begging is ok after i have message in screen ,Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled

Unplug whatever other devices you also have plugged into USB, and try again. Better not to plug the iPhone into a USB hub.

Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. This shows up even when I am not connected to a USB. what do you think the problem is?

Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. - This is what shows up sometimes even when no USB is connected. What could be the reason?

Try a different USB cord, seen this many many times, its highly likely a damaged USB cord.
Restart the computer to redefine Port definition. If still a problem
You can also resetting PRAM/NVRAM: http://support.apple.com/kb/ht1379
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3

HT1338 what to do when this happens Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.

Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.

update to the above (my edit has disappeared !)
This appears to be a problem with the USB cable. I can make this message happen during a sync with itunes. If i lift the cable with my finger about a cm away from the join between the cable and the USB connector head of the cable I get this warning message each time I try. I must have a loose wire/connection in the cable.
Thanks

HT1151 how to fix "because a usb device was drawing too much power from your computer,one or more of your usb devices have been disable"

how to fix "because a usb device was drawing too much power from your computer,one or more of your usb devices have been disable"?

Check to see if you have a bad cable. After rebooting, connect a new one and see if it works.

When I plug in my iPhone to my iMac my computer flashes a box that says my USB device is drawing too much power from my computer and claims one or more of my devices have been disabled. Then it will not sync my iPhone. Any solution ideas?

When I plug in my iPhone to my iMac my computer flashes a box that says my USB device is drawing too much power from my computer and claims one or more of my devices have been disabled. Then it will not sync my iPhone 5. Any solution ideas?

Try unplugging any other USB devices. If you are using a hub, don't, connect the phone directly to a computer USB port.
None of these are necessarily things you should do, but might help. For instance, if you plug the phone to an already busy hub, the phone might be "the straw that broke the camel's back" and lock out the hub.

Because a USB device was drawing too much power from your computer - bla, b

In the last week or so, my iMac (Intel CoreDuo) started displaying an error message every 30 seconds saying "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled", followed by some other useless "explanations" (which BTW can't even be copy/pasted). This has happened before (for about a year now) at every startup, but that was more acceptable; now that the message comes every 30 seconds it renders this machine unusable.
I tried it with or without any USB accessories attached, with or without powered hubs attached, I reset the PRAM and SMC and reinstalled the OS twice. The only option I have left is to trow this machine out and buy a new one (believe me, it's not going to be a Mac).
This shows not only the lack of quality of the hardware (crappy logic board and USB ports) but also a complete disregard for the annoyance these constant popping messages create to the end user when designing the OS. Just while writing this message I had to press the OK button about 10 times. It's AWFUL!!!

Hi cimula. before you turn to the extremes have you tried reinstalling snow leopard. maybe you had a problem occur when it was originally installed and is missing a driver or something. also take it to an apple store if possible. take everything needed to run the imac and show one of the geniuses the problem and 90% of the time if you are nice and calm they will gladly help and diagnose the problem even if it is out of warranty. no promises it will be free it could be a hardware malfuntion. just dont force your self back to pc once all of the problems are gone you will love it again. i switched from pc which i had been using my whole life after a friend showed me his macbook and have never looked back. of course once and a while there will an error, problem or whatever but is it worth switching to a pc which has to have a security program running 24/7 to stay alive and sucking up all of the cpu and slowing you down? hope i am helping Dean

I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." PLEASE HELP!

I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!

The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."

I've bought a new USB flash memory. I plugged it in the USB port then a message come out: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.... Please help...

Similar Messages

Maybe you are looking for