HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u
Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any help
If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.
Similar Messages
-
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?
Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. - This is what shows up sometimes even when no USB is connected. What could be the reason?
Try a different USB cord, seen this many many times, its highly likely a damaged USB cord.
Restart the computer to redefine Port definition. If still a problem
You can also resetting PRAM/NVRAM: http://support.apple.com/kb/ht1379
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3 -
I have a new iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?
If you just bought the iMac and the Sjuperdrive take the superdrive back and get a refund. The by any other brand external DVD drive that connects by USB and try that. Most come with a Y USB cable to allow you to connect to 2 USB ports to supply enogh power to the drive IF Needed.
Or take both back and get a refund on both, you have 14 days to return it no questions asked, and buy another iMac and some other brand external DVD drive. -
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
update to the above (my edit has disappeared !)
This appears to be a problem with the USB cable. I can make this message happen during a sync with itunes. If i lift the cable with my finger about a cm away from the join between the cable and the USB connector head of the cable I get this warning message each time I try. I must have a loose wire/connection in the cable.
Thanks -
I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELPGet a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
I keep getting this mesage : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
I need to charge my phone but it's not letting me!! Please help!Solution may be found if you search in the "More Like This" section over in the right column and in the article - http://support.apple.com/kb/HT1151.
-
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled?
What do I do?Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. One symptom of a bad Lightning cable is the message you are getting.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
how to fix "because a usb device was drawing too much power from your computer,one or more of your usb devices have been disable"?
Check to see if you have a bad cable. After rebooting, connect a new one and see if it works.
-
Everytime I plug in my android USB, I get a message that states the USB device is drawing too much power from my computer. The only other USB device connected to computer is my printer. Even when I disconnected the printer, I was still unable to use the android. When i use a non-android USB to say charge my phone, it will charge it, but it won't recognize any of my android data. What gives?
I'm going to guess that you are plugging into either the USB port on your keyboard or an unpowered hub. USB has two both low power and high power port specifications that determine how much electricity the port can supply to a device. The ports on back of your iMac are high power, the keyboard ports are low power. If you have an unpowered hub it has to 'share' power with all the devices you plug into so it too would have low power ports.
-
Here is the total error message:
"Because a USB devce was drawing too much power from your computer, one
or more of your USB devices have been disabled.
To prevent damaging your computer, the USB device drawing too much
power has been disabled. Other devices may have also been disabled.
When you disconnect the device drawing too much power, your other USB
devices will be enabled again."
Now in contrast to every other thread on this i get this error message eveytime i connect my soundcard (interface). Not when i start up the mac or anything, just when i connect the sound card. (the soundcard does not have its own power source but note that this has never happened before and i have had this soundcard for about a year!)
It deactivates so i cannot use it.
I have tried:
Connecting the soundcard to my mothers mac -> it worked!
Connecting an external harddrive to my mac -> it worked!
so basically, i can't be the soundcard or the cable and it cannot be the mac USB port?
I don't know what to do! i really need this to work! anyone got an idea??Hi, ryankeenanrk.
Thank you for visiting Apple Support Communities.
I would recommend trying the steps in both articles below and test the results.
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/ph11243
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Cheers,
Jason H. -
When I plug in my son's iPad I get this message "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I only have one charger for this iPad all my other chargers are for iPhone 4s. I have pluggerd it in different outlets around the house and the iPad will not charge. When I plugged it on my lap top to back it up it gave me the warning message. HELP!!
I have the same problem on my Air. The message first came up while my iPhone was connected to it for some time. Since then, it pops up ALL THE TIME, whithout anything being connected to the USB port, at what appear to be random intervals that vary between about one hour and a few seconds. I have tried resetting the SMC and the PRAM, but no results. A quick search revealed that thousands of users are facing this problem, but Apple has yet to provide a solution. Please help!
-
i fix my iphone 5 to syn with my macbook in begging is ok after i have message in screen ,Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled
Unplug whatever other devices you also have plugged into USB, and try again. Better not to plug the iPhone into a USB hub.
-
When I plug in my iPhone to my iMac my computer flashes a box that says my USB device is drawing too much power from my computer and claims one or more of my devices have been disabled. Then it will not sync my iPhone 5. Any solution ideas?
Try unplugging any other USB devices. If you are using a hub, don't, connect the phone directly to a computer USB port.
None of these are necessarily things you should do, but might help. For instance, if you plug the phone to an already busy hub, the phone might be "the straw that broke the camel's back" and lock out the hub.
Maybe you are looking for
-
Error Happened at RFC Server Cannot Open the Job Batch File.
We have BW 7.0 and Data services 12.1. We are scheduling a Infopackage in BW that triggers a job in Dataservices server. We had checked the connection between Dataservices source system in BW and RFC server on Dataservices side and these connections
-
How to add cell editor to cell variant dynamically?
Hi everyone, I'm developing a web dynrpo component. In one of the views , I need to modify the view dynamically because the data structure only can be determined at runtime. And the table column should have two cell variants. I don't know the exact
-
I feel silly: Music plays only thru iPhone, not Bose speaker, when docked
Hi--I've read the threads on the Bose Sound Dock and they seem to conclude that yes, the iPhone is compatible with the Sound Dock as long as you put it in Airplane Mode. No problem with that--but when I dock it, the sound is still coming only from th
-
Hi Experts, I am a Computer Science engineering Graduate with approx 2 years of SAP experience. My experience includes: OOPS-ABAP programming (8+ months) ABAP-HR (7+ months) SAP-NW XI (4+ months) I am getting option to choose ABAP-HR or XI for my ne
-
Even logon distribution using load balancing
We are trying to scale our system to distribute logons across multiple app servers. We have setup Logon groups and have set MSHOST in our connection configurations but since all logon's occur at roughly the same time, they all end up going to the sam