I've connected my macbook pro (os 10.6.8) to an external display, but it will not go into clam shell mode! When I close the lid the laptop goes to sleep, and I am unable to wake it using the external keyboard or mouse.
A rundown of what I've tried:
Adjusting energy settings to try to prevent sleep
Pluging the USB keyboard and wacom tablet directly into the laptop (as opposed to a usb hub)
My laptop's power cable is connected
My display (a Vizio TV) is recognized in the System Preferences panel
I'd been using this TV for about a year with my older Macbook Pro (OS 10.5.8), though using a different wireless keyboard and mouse
***Update: The issue seems to lie with the keyboard and wacom tablet. I am trying to use a wireless Case Logic keyboard (with dongal) and wired wacom tablet to wake the Macbook Pro in clamshell mode. To experiment, I tried using my Logitech wireless keyboard & mouse set (also dongal) that I had been using before and it wakes the computer without any problems! However, I really need to be able to use my wacom tablet. If I switch to the tablet after waking the computer using the Logitech keyboard & mouse it works, but once the computer sleeps it won't work anymore. I could keep switching back and forth I suppose, but it's sort of a pain. There has to be an easier way! Any ideas why the wired wacom tablet is unable to wake the computer in clamshell mode?
Thanks!
So your keyboard or mouse won't wake the Mac when you close the lid correct? Try resetting the SMC and pram
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Similar Messages
-
My mac desk top goes to sleep and I am unable to wake up
having issue with Mac sleeping and mouse nor keyboard
ALSO how do I reload the mac ios .,10.6.8 softwareSMC reset.
DALE -
I have a new macbook pro 2,6Ghz i7, 8GB 1600 Mhz internal ram, but he will not boot from an external disk with operating system Snow Leopard.
These Macs shipped with 10.7, and will run nothing older than that:
MacBook Pro
Date introduced
Original Mac OS X included
(see Tips 1 and 3)
Later Mac OS X included
(see Tip 1)
Mac OS X Build(s)
(see Tip 2)
MacBook Pro (Retina, Mid 2012)
Jun 2012
10.7.4
11E2068
MacBook Pro (15-inch, Mid 2012)
Jun 2012
10.7.4
11E2617
MacBook Pro (13-inch, Mid 2012)
Jun 2012
10.7.4
11E2617
MacBook Pro (13-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001
MacBook Pro (15-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001
MacBook Pro (17-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001 -
When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.
You are being scammed. Please ignore and close. Do not click any links or call any phone numbers!
Remove Browser Pop-up Problems
AdwareMedic
Adblock Plus 1.8.9
remove adware that displays pop-up ads and graphics on your Mac -
The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?
I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex -
As already stated, I have recently purchased a MacBook Pro with Retina display. It will arrive in 4-5 weeks so I don't assume it will arrive in less than 30 days. I would like to know wheather I will still be entitled to a free softwere update to the Mountain Lion. The laptop will ofcourse be completely new and recently purchased, so it would be very disappointing if I am not entitled to this update. Please let me know if you know anything about this or have any assuptions. Thank you
You can call apple if you need reassurance, but they will not turn you down on the free upgrade just because you have not received your computer by day 30.
-
im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active.., and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??
this says it all..Welcome to the Apple Community.
Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive. -
The program was working fine..now nothing. I have un-installed it several times...re-installed it several times. Will not even open in safe mode.
For some things you can try see [[Firefox will not start]].
I would start by seeing if a new profile works. See [http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows creating a new Firefox profile on Windows - MozillaZine Knowledge Base]
If the new profile does work, you can transfer selected data such as bookmarks and passwords to the new profile. I would not copy preferences or extensions, instead re-install the extensions. See [http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox Transferring data to a new profile - Firefox - MozillaZine Knowledge Base] -
Does any one have the same problem with their MacBook Pro i5 Intel Dual Core? If the computer goes to sleep (not the screen) and is asleep for a while, when I try to wake it up it doesn't respond. I have to power it downn and restart it and sometimes it takes two or three attempts. Otherwise it works fine. I upgraded the memory to 8 GB. That is the only alteration doen to it. I've performed one SMC restart and now it wakes up but it takes a while and a gray screen shows up. When I insert a DVD it won't start automatically I have to start the application in order to see it. Any suggestions?
http://www.apple.com/support/macbookpro-videoissues/
-
Mac Book Pro running Mountain Lion OS X 10.8.5 after the notebook sleeps audio and video does work (for example on YouTube). I have been able to temporarily work around this by toggling the settings on Built-in Output in Audio Midi Setup, Audio window between 2ch-20bit Integer and 2ch-24bit Integer. But this is a temporary fix until the laptop sleeps again.
When it's not working, all system sounds (emails "dings", delete file "swish", etc.) are silenced, and video playbacks on YouTube and elsewhere freeze and have no audio until the Audio Output settings are toggled then they all immediately start working.
Has anyone encountered the same? Have a long term fix for this annoyance?
I cannot upgrade the OS to 10.9 Mavericks yet because of a corporate policy - there is some conflict with 10.9 and our corporate VPN connection.Apple support article:
Startup Grey Screen
You can try to check your hard drive.
Apple Hardware Test doesn't catch everything, so even if it doesn't find a problem, you could have one.
Apple Hardware Test -
How to connect new Macbook pro 2014 to iMac 2010 for a secondary display
I have a new Macbook Pro 2014 and an old iMac 2010. How can I connect them to have an additional secondary display? I thought I would need a thunderbolt cable with a Thunderbolt to Mini DisplayPort adapter but I can't find that. There's lots of options and I don't understand what would be best.
Macbook Pro 2014
iMac 2010
Any help would be much appreciated!Hi Nathaniel,
Thunderbolt is another way of calling it a Mini Displayport, thunderbolt is just faster and has more usage with other products (i.e. hdds, displays etc.) You can hook up a thunderbolt to a mini-display port because both are the same size and serve the same function. Just don't connect anything to the display port on the iMac other than a computer.
Kind Regards,
Sidney Ramirez -
My computer goes to sleep and is almost impossible to wake up
I have a HP Pavilion HPE with windows 7
After it goes to sleep you can hardly get it to wake you havve to shake and shake mouse and hit the space bar finally it wakes up. Is there a setting to correct thisSMC reset.
DALE -
I's trying to connect my macbook pro to my pc so i can share files but i cant figure out how
i tried to connect my macbook to the pc through workgroup, but when i pressed on it it dissapeared. I cant figure out how to connect my macbook, to my Pc to share files.
http://macs.about.com/od/filesharing/ss/file-sharing-win7-snow-leopard.htm
-
Unable to change my Apple Id fully, the Apple I'd screens still show my old Email address even though my apple email has been changed correctly? This means that when I go to ITunes or try to update my apps the old I'd (email address ) is shown and you cannot change it on these screens. How can this be resolved?
Does the updated version of your account show in Settings > iTunes & App Stores on the iPad ? If not then try logging out of the account by tapping on that id and then log back in and see if that 'refreshes' the account on the iPad.
-
I bought a MacBook Pro from Indonesia on 24th of February 2012, but it doesn't boot up from last week, Then I took it to Sri Lankan authoriser( future world) with the invoice which I got when I purchased it, but they say that my warranty is not available. WHY I S THAT?
Give Apple a call:
http://support.apple.com/kb/HE57
Ciao.
Maybe you are looking for
-
Saving that always a file should be opened with a program does not work correct. I want *.nzb to be opened with a certain program. I save this combination and still everytime I get the option of an other programm.
-
How can I prevent a negative cash discount?
The logic being used to determine a cash discount for an invoice billing document is: Total Cost of Materials u2013 Total Freight Cost - Base Value. Base Value x Cash Discount % = Calculated Cash Discount. Base Value u2013 Calculated Cash Discount
-
I am having trouble with losing chunks of text and loss of functionality re: the back-key that erases text; it stops working for a few minutes at a time. Any clues? It is an iPad 2.
-
MDX Query for Top 10 in SSAS Project
Hi Guys, Please I need an MDX query that will help me calculate Top 10 inside the SSAS project. Your help will be greatly appreciated. Thanks me
-
How to run a vi without using menu button on top
i got to execute or run the labview program without using the menu button.There should be a button on front panel clicking on to it must run the vi.