I've got a disk that refuses to be deleted

I have an external drive that doesn't let me dismount it. Disk Utility shows the disk is know longer mounted but the icon remains on the desktop. I've tried to reformat the disk but but that creates a new disk on the desktop. The original icon remans on the the decktop. Is there a Unix command that would remove the the icon?

Is it still there after a reboot?

Similar Messages

How can I delete two .jpg files from my desktop that refuse to be deleted?

How can I delete two .jpg files from my desktop that refuse to be deleted?

The two icons refused to be moved to the garbage. The good part in all this is that ater I turned off the computer at night and turned it back on the next morning they were gone!
Thanks.

I have a podcast video that refuses to be deleted.

I have a podcast video that refuses to be deleted. Normally, a swipe would bring up the delete function. For one video it will not allow the delete button. I am sure there is not content, only the label. How can I get rid of this annoying entry? This is a Iphone 4S.

Through another topic, I was advised to restore the Iphone. The restore also resolved this issue. The annoying entry is now removed.

My trash bin has one item that refuses to be deleted. Under name, it says, 0. date; dec. 31, 1903. size; 0 kb. I have no idea where it came from. When I click, info. the info. window starts to appear, then goes away. Weird or what? Hope someone can help?

my trash bin has one item that refuses to be deleted. Under name, it says, 0. date; dec. 31, 1903. size; 0 kb. I have no idea where it came from. When I click, info. the info. window starts to appear, then goes away. Weird or what? Hope someone can help?

sorry i forgot that... i use php5 so i guessed at the module name... upon looking closer at the conf its mod_php4.c
<pre>
<IfModule mod_php4.c>
AddType application/x-httpd-php .php
</IfModule>
</pre>

I am trying to upload my Iphoto library, but I just got told that I dont have enough free space... its only 60GB of images, on a HD disk that still have 460 GB free...

I am trying to upload my Iphoto library from a reinstalled OSX, but I just got told that I dont have enough free space... its only 60GB of images, on a HD disk that still has 460 GB free...

If you correctly stated that you are importing an iPhoto library into another one it will not work as TD said
The only way to do it is to drag the old library intact as a single entity to the pictures folder of the new system and then launch iPhoto
There is no importing, dragging and dropping or uploading involved
LN

HT4848 Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do

Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do ?

If this is a fairly new Mac running either v10.7 Lion or v10.8 Mountain Lion she can use Lion or Mountain Recovery to repair the startup disk or reinstall OS X.

Outgoing mail document that refuses to be sent but also refuses to be deleted.

I've got an outgoing mail message that refuses to be sent but also refuses to be deleted. It's really frustrating! I've tried pressing return and then quickly delete- quitting mail- restarting the computer- but the message keeps popping up. HELP!

Quit Mail, Trash this file...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

Can't do factory restore & only disks that keep ejecting are the osx install and apps disks

First of all let me say, this is my first Apple computer and I'm not experienced in forums. Please do not read rudeness into what is actually frustration at searching forever for a solution and trying not to wish I had been talked into an Apple. With that said....
I've had my iMac for about a year and a half. We had lost our internet and were using a hotspot for awhile so we could look for another provider and get online if we needed to. One day I signed on and, we didn't have an isp mind you, but the browser opened up to the dominant isp in this area saying a virus was detected coming from this iMac address? I thought that was strange and panicked so decided to do what I would on a pc, just restore the whole thing to factory settings. Everything was going smooth, (my updates were at 10.6.8 at the time)... when I restored I was back at 10.6.2. (osx disk) I was doing systems updates and one apparently hung.... when told to restart, I did... but the computer would never boot back up. It would turn on.... go to gray screen... then blue screen... then shut off. I couldn't boot in safe mode, pram reset did nothing, smc reset did nothing, couldn't hold 'd' to get to diagnostics, couldn't boot to recovery... it kept spitting out disks after trying to read them... with all those solutions I found online and nothing helping I had to call Apple... they couldn't help over the phone because Apple Care expired, unless I purchased help... this frustrated me because every where I found my problem and a different solution their Apple Care had expired too.... so had to set an appt at an Apple store.
So took it in to Apple, just got it back yesterday. I let them know I was restoring to factory settings so wasn't worried about losing anything. When I picked it up, I was told no charge... it was a software issue they saw where it hung and fixed it. I tried to ask questions about the 'software repair' but they didn't seem to want to answer my questions. It just says 'software repair' on my order. So I asked 'okay, so it's back to factory settings like when I bought it?' I was told yes and I said great that was my goal anyway. I get home and it's NOT like when I first purchased it or like a factory restore. Everything I was doing before it crashed is on there. So I'm back to trying to do a factory restore. But for some reason now, it seems the only disks that keep self ejecting are the osx install and application disks. I still can't do a boot recovery, AHT, or 'c' boot... since the apple disks eject I can't use start up to get to them.
I find it odd that both the oxc install disk and applications disk would be damaged at the same time when they both previously worked. I called the Apple Store where I took it to talk to the geniuses that worked on it because I had a question about the repair they did....
Apple: I'm sorry we don't offer tech support
Me: I understand but I had a question about the repair done from there the other day
Apple: We are just a store and can't answer tech questions
Me: I understand and get that but since I took my mac to your store to be worked on I thought I could ask the person that worked on it a question about the 'software repair' and meaning and what software was repaired
Apple: No you will have to set another apt to bring your computer in if you are still having problems
Me: UGHHHHHH (pulling hair out)
So (a little late huh?) to make a long story short giving what I stated above:
Why is it, only the osx install and application disks not working now? They worked before taking it to Apple
What can I do at this point?
Can you do a factory restore without disks on a Mac?
If by chance both disk did for some reason go out, how do I get them replaced?
If I gave TMI without enough important info let me know.
My OS X install disk says version 10.6.2 on it
About this Mac currently says Mac OS X version 10.6.8
Batteries died on keyboard and mouse so am using usb wired keyboard and mouse
At some point I had used bootcamp and then later found parallels so I could install a Corel product and keep using... could some windows files be messing something up in there somewhere?
It used to say Mac OS X Version 10.6.8 and I could have sworn I saw it said 'snow leopard' in there somewhere, now I can't even find that word in search on the computer. Long post I know but trying to set what was going on at the time I took it in.
I'm not sure what else needs to be added to get this to the correct thread or help. As I stated my goal is to have it like I just pulled it out of the box for the first time so no solution will scare me off about loss of data.
Thanks for any help.

Wow, sorry to hear of your experience. Seems strange that your disk would just eject like they did. It could be a lot of things but more than likely you just kind of have to start all over.
What I would do is insert your system disk and instead of going immediately to an install I would go to disk utility and erase the drive. That will erase everything on the disk and give you a new blank disk to start with. After that I would try to reinstall the system. Assuming that goes well then you should be restored to where it was when you purchased it. After that you can reinstall all your applications or personal files. I hope you have good backups.
I remember one time I was having a similar problem and don't ask my why I did it but I actually could not get it to install a system. I removed both of my ram sticks, shut the computer down for about 10 minutes including unplugging it from the wall plug, then reinstalled the ram, plugged it back in and started up from the system disk and all worked just fine. To this day I have no idea if pulling the ram helped but I have never had to do it since and for some dumb reason that solved the problem I was having, which is the same problem you are having now. Call it voodoo but it worked.
Good Luck!!
Message was edited by: Al Van Malsen

Imac will not see my hard drive on start up, wants to start from network start up disk that does not exist. How to get rid of it? So there is just one choice / my hard drive.

I have a Intel duo Imac. Everything has been running relatively smoothly for a few years now. All of a sudden my computer will not start. I get the flashing folder with a question mark.
When I go to Start up disk in my system perfernces while the computer is on. I see 2 possible choices. One is my hard drive with the operating system shown. The other is a non-existant Network Start up disk with a question mark in it ( looks like a hard drive with a question mark and it say's its a "network start up disk).
All I think I want to do is get rid of the Network startup with the question mark. I can not find anywhere how one can just remove an old or non existant start up disk without reformatting.
I believe this came from a clients hard drive who had a network system on it. We no longer have that drive. It no longer exists. But a latent icon shows up in start up disk.
When I go to change the start up disk. I can change it to either the hard drive or the network with the question mark. But when I select my hard drive and then got to restart the computer. I get the flashing folder with a question mark on start up. I have also seen the flashing globe a couple times.
When I attempt to run disk utility from may install disk ( holding down "C" on start-up ). Disk utility does not see my hard drive. Just the Apple install disk with the disk utility on it.
What can I do to remedy this short of re-installing? Will a program like Disk Warrior or Tech Tool help?

Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know? It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks.

I currently have a MAC Mini, which has 1 Firewire 800 port. I have a 1TB external hard disk that runs at Firewire 400. Can I insert another external hard drive that runs at Firewire 800?

Here's the deal. Currently running SL 10.6.8 on a MAC Mini. Planning for eventual upgrade to ML. Have a 1TB external hard drive partitioned into two volumes, one volume for Time Machine and one volume for SL which I periodically update using Superduper. Thus I always have a point-in-time bootable backup on the external hard drive.
The MAC Mini supports Firewire 800. However, booting from my current external hard disk is pretty slow, since it only supports Firewire 400. I am considering buying an Iomega MiniMax which supports Firewire 800. Then, I would use the MiniMax as my bootable backup volume, and relegate the older hard drive to Time Machine.
So, question #1 is, can I daisychain the new MiniMax between the MAC Mini and my existing external hard drive? My expectation is that the new Mini Max would run using Firewire 800 and that the existing hard drive would run at Firewire 400 speed as it does today. If it doesn't (e.g., daisychaining in the Firewire 400 external disk with the MiniMax Firewire 800 external disk ends up running the whole leg at 400), my resolution will be to run the existing hard disk off an available USB port and have just the MiniMax running at Firewire 800.
Why am I going to all this trouble? That's question #2. I don't trust upgrades; they always break something. When I upgraded from 10.5.x to 10.6.x, the web directories got renamed, and all of my web apps 403'd until I figured out what happened. Plus, I have accounts for other family members, and in order to ensure their ability to use the computer during my upgrade process, I need to have the ability to fall-back quickly to a known-stable version of OSX. So what I'm trying to do is insulate myself from problems by partitioning the MiniMax into two volumes, taking a Superduper image of my current installation on the Mac Mini to MiniMax external drive volume 1, then upgrading to ML on the MAC Mini, and take a SuperDuper image of that to MiniMax external drive volume 2. Then, if the upgrade results in problems I can't resolve immediately, I can simply reimage the MAC Mini from MiniMax volume 1. BUT ...
... I've read that the ML installation creates a "service and support" partition that is different than the startup disk. I'm concerned that I won't be able to reimage the hard disk in the MAC Mini once I upgrade it to ML because of the partitioning changes it introduces on the startup disk. Theoretically, I +should+ be able to use the disk utility on my SL system to repartition the disk in the MAC Mini prior to reimaging it from my backup, but I'm considering the possibility that the new partition may be of a type that the SL disk utility cannot identify, and might therefore be unable to delete or even detect. So I'm hoping someone else has been down this road and can advise me. Even at Firewire 800 speeds, booting from an external disk is still going to be slow, so I want to be able to restore my SL image to the MAC Mini hard disk.
A little background on me. I work for a major disaster recovery provider. I used to have a Mac PRO G5, which I got used, and the first thing I did with it was install a second hard disk, SuperDupe an image from the first disk to the second, and made sure I could boot from the second. THEN I started using and customizing the MAC. I really feel vulnerable with the MAC Mini, since it only has the single internal hard drive - sort of like going out in public dressed only in a long T-shirt. So my whole thing is, I ABSOLUTELY MUST BE ABLE TO PUT THINGS BACK THE WAY THEY WERE before I do the migration to ML.
Obsessive-cumpulsive? Yep. Anal? You got it. That's why I'm in the DR business.

You may have overloaded the port, following the instructions below it should reset:
+1. Shut down the computer.+
+2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).+
+3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.+
+4. Plug the computer back in and turn it on.+
+5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.+
http://support.apple.com/kb/HT1317?viewlocale=en_US

When installing Maverick on my 17" Macbook pro I got the message that my HD is damaged and can't be repaired. I now can't restart without simply repeating the attempt to install Maverick and thereby returning to the same message. How do I abort install

When installing Maverick on my 17" Macbook pro I got the message that my HD was damaged and couldn't be repaired. (not good news!!) I now can't restart without returning to the Maverick setup and therefore returning to the same message. How do I abort the Maverick installation so that I can try to return to the previous OS so that I can try to recover/repair the HD

I have the same problem with my 2008 MacBook. Repair disk from disk utility says it was successful but the installer thinks it's groundhog day after a reboot. I also tried fsck -fy after booting in to a command mode and it came back clean but again the installer gives the same error message. It seems like a bit is stuck somewhere indicating my HD is bad when it isn't.
I had the latest version of Mountain Lion and have applied every upgrade up to then without issue.
Anyone find a solution yet without having to erase the entire disk and staring over?
Attached is a screen shot of the error.

How do I repair a disk that's OK?

I'm trying to do a remote install, and it fails, telling me that the Macintosh HD needs to be repaired. But when I verify the HD, Disk Utility tells me that the disk is OK. How do I repair a disk that's OK?
Here's the context. I want to install Lion on a MacBook Pro (“MBP”) that’s currently running Leopard. Apple says to install Snow Leopard and then get Lion from the App Store. So I bought a Snow Leopard install disk and thereby discovered that my MBP’s SuperDrive is no longer working. Had I known, I could instead have bought Lion on a flash drive, but I’ve already paid for the install disk. I’ve also got an eMac running Leopard, but I don’t have a FireWire 6-pin to 6-pin cable, so can’t use target disk mode. So I’m trying a remote install.
To remote install, I put the DVD into the eMac and turn on DVD Sharing. Back on the MBP, I use Terminal to enable ODS:
$ defaults write com.apple.NetworkBrowser EnableODiskBrowsing -bool true
$ defaults write com.apple.NetworkBrowser ODSSupported -bool true
and reboot, and now I get a Remote Disc in the MBP’s Finder Sidebar Devices. I select the Remote Disc and the eMac shows up in the Finder window. I double click the eMac icon, and the remote Mac OS X Install DVD opens in the Finder window. I double click the installer and it starts running, so I’ve succeeded in starting a remote install. The problem is that the installer quickly fails with this message:
The disk “Macintosh HD” needs to be repaired.
Go to the computer with the Mac OS X Install DVD, open Remote Install Mac OS X (located in the Utilities folder in the Applications folder) and follow the onscreen instructions for restarting your computer using the DVD.
When the Mac OS X Installer opens, follow the onscreen instructions to install Mac OS X. During installation, the Installer repairs the disk automatically.
I think what it’s suggesting is that I boot my MBP from the remote disk. (Right?) I think that won’t work for me because I’ve got a MacBook Pro rather than a MacBook Air or Mac Mini, which are the only types that can boot from a remote disk. (Right?) Instead I thought I’d do whatever repair is necessary to the MBP’s Macintosh HD and then try the remote install again. So I ran Disk Utility on the MBP to verify the Macintosh HD, but it succeeds with “The volume Macintosh HD appears to be OK.”
I can’t remote install until the disk is repaired. But how can I repair a non-existent problem?

Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.

I was loading some CDs into my iTunes library when the disk drive refused to "suck in" the next CD. Does anyone have a suggest on how I might proceed?

I was loading some CDs into my iTunes library when the disk drive refused to "suck in" the next CD. Does anyone have a suggest on how I might proceed?

Yes, that is a Catch 22. If you have another Mac you can connect your Mac to it in the Target Disk Mode, Transferring files between two computers using FireWire, and use Disk Utility on the second Mac to try to run the Hardware Test from there. Not sure if it's possible to a connected Mac though.
You can try this several times in the Terminal app and then see if a disk can be fully inserted:
Enter the following command followed by the Enter or Return key:
drutil eject
Do it several times and then try another disk. (A long shot).

Solaris 8 - No Disks that meet the Criteria in the solaris installer documentation

Hi there
I am installin sloaris 8 in Pentium Pro Machine with Quantum Firball Hard
Disk 10 GB , at installation time the Solaris recognize the existance of the hard disk by givingme the option to load from CD ROm or the Quantum Hard disk but later on it gives me the following message
No Disks that meet the Criteria in the solaris installer documentation
Your help will be appreciated
Thanks

Hi
I am using IDE Controller not SCSI, the Hard disk is being partitioned using Dos FDISK , When i got this problem Solrais write this message after the error i mentioned before
Please Check the system or try another installation option
then it gives me Unix Prompt , I tried to use FDISK but could not get the right Disk name , I tried FDISK /drv/dsk/c0t0d0s0 or /drv/rdsk/c0t0d0s0
but no way , I am new to Unix any way , I tried to get the disk name through df,sysdef,prtconf but could not as well , I guess may be the solaris partition is the problem ? may be if i could creat a solaris partition it will solve it ? , I am using the full version of solaris 8 not the beta one.
Thanks for your help
Roushdy

I've got a disk that refuses to be deleted

Similar Messages

Maybe you are looking for