I've gotten myself into the FRENCH iStore and don't know how to get back to the one in the USA. Does anyone know how to do this?

I wanted to buy a song from Midnight in Paris but couldn't get it in the USA, so got into the French ITunes Store. I got there and now can't get back to the USA iTunes store because (1) I don't know how to speak French and (2) I have no clue how to get back. Can someone help me?

Hi. Try this: From the iTunes Store front page, scroll to the bottom of the page. In the bottom left corner there should be a flag, in this case the French flag, click it and you 'll be presented with a screen to select the correct country.
Stedman

Similar Messages

How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?

How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?
I basically managed to learn how to invert parameters which allows me to be as default in the clean guitar channel and if I switch the first button on the midi foot controller I switch to crunch, but at this point I tryied so hard to programm the second and third button to switch, only through a button in one step, to a third channel for distorsion or a 4th channel for solo guitar but I couldn't figured out how this work can be done!
I would appreciate if anyone could help or share this experience with others who are experiencing the same problem.
Cheers.
F.

I cannot seem to get mainstage to recognize my FCB either. I am using IFCB. Anyone figure this out?
Thanks,
Eric

I downloaded a ringdown direct from itunes to my iphone 4S. When I go to settings/sounds/ringtone, the new ringtone is not there! I have downloaded it twice, but still not there. Does anyone know how to resolve this?

I downloaded a ringdown direct from itunes to my iphone 4S. When I go to settings/sounds/ringtone, the new ringtone is not there! I have downloaded it twice, but still not there. Does anyone know how to resolve this?

Thanks, your advice prompted me to look at it again on itunes, and discovered that i have actually downloaded the full song instead of the ringtone. False alarm...and thank you!

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?

I recently did a "over the air" sync with my notes to my email account and when i did i didnt get back all my notes, could the other notes be in another location?

i recently did a "over the air" sync with my notes to my email account and when i did i didnt get back all my notes, could the other notes be in another location?

Go to Settings>iCloud and set up the iCloud account you were using before by singing in with the same Apple ID. Then turn the data you were syncing with your iCloud account back to On, and if prompted, choose merge.

I am trying to recover a backed up version of my iphone. Does anyone know where the backups are stored? thanks

am trying to recover a backed up version of my iphone. Does anyone know where the backups are stored? thanks

Backing up, updating, and restoring iPad, iPod touch, and iPhone software
more detailed information about backing up

I have deactivated my CS6 on my old computer and now when I have downloaded a trial version and enter the serial number it says not valid? I have only used my license on one computer before? Does anyone know the problem?

I have deactivated my CS6 on my old computer and now when I have downloaded a trial version and enter the serial number it says not valid? I have only used my license on one computer before? Does anyone know the problem?

Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
OR
Asked to sign in after paying may help
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
or
http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

I own an iphone 3gs and it just turns off when it wants, like when its loading something? does anyone know whats the problem?

i own an iphone 3gs and it turns off when it wants even if the phone is 100% battery, its when the phone is loading something. does anyone know my problem

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I am trying to use the RS232 to control a circuit board. It would have to simultaneously output SerialClock, DataIn, and Chip Select signals, while also receiving DataOut signals; therefore 4 signals total. Does anyone know if it this is possible?

I am trying to splice 4 wires out of the RS232 serial cable (the 9-pin type) and wire them to a circuit board. The 4 wires would control 4 signals: DataIn, DataOut, SerialClock, and ChipSelect. The serial clock would synchronize the DataIn and the ChipSelect is asynchronous. DataOut must coincide with SerialClock also; therefore there are 3 signals that must be able to switch concurrently. All the handshaking enabled by RS232 is thus unnecessary in my opinion. Does anyone know of how this can be done?

I am trying to splice 4 wires out of the RS232 serial cable (the 9-pin type) and wire them to a circuit board. The 4 wires would control 4 signals: DataIn, DataOut, SerialClock, and ChipSelect. The serial clock would synchronize the DataIn and the ChipSelect is asynchronous. DataOut must coincide with SerialClock also; therefore there are 3 signals that must be able to switch concurrently. All the handshaking enabled by RS232 is thus unnecessary in my opinion. Does anyone know of how this can be done?

I am a residential appraiser and recently purchased an ipad4 to use for my home inspections. Some homes are foreclose without power and I am unable to get a good picture without a flash. Does anyone know of a flash attachment for the ipad4?

I am a residential appraiser and recently purchased an ipad 4 to use for my home inspections. Some homes are foreclosed poperties without power and I am unable to get a good interior picture without a flash. Does anyone know of a flash attachment for the ipad 4? I found a flash attachment for the ipad 2, but it does not work with the ipad 4.

I'm sorry to hear that.
I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago. I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all. I can go weeks between syncs.
Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist. Add another playlist ("walk" or "workout") and add different podcasts to that one.
Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff). Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for. It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do.

I keep getting the message "no volume available" when I hook my iPad up to my TV to watch netflix, does anyone know how to fix this?

I am trying to hook my iPad up to my TV so I can watch netflix on it, however, when i hook the AV cable up i get a message that says "no volume available." my iPad is not muted, does anyone know how to fix this problem?

Read this link and it may provide some help: https://discussions.apple.com/message/15460209#15460209

I locked myself out of my ipod and i have no way of getting back into it. any way i can reset it from my computer?

i locked myself out of my ipod because i forgot my password. any way of me reseting it from my computer? its not my personal compouter that i have my own itunes on though. HELP!

Since you will not be using your syncing computer,
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How can i convert the firefox-history-timestamp in places.sqlite into a normal date format? The firefox-timestamp is not equivalent to the unix-timestamp, that's why I ask. I could not find a conversion function. Does anyone know something about this?

As I opened the places.sqlite with an sqlite-editor I found out that firefox saves the last_visit_date via a timestamp which is 16 digits long. I realized that the first 10 digits are similar to the corresponding unix-timestamp but not equal. So.. how can i convert the firefox-timestamp into a normal date? Or into the corresponding unix-timestamp?

Write a bash script or 'C' program to change the date format and then use the sql update function to receive the stdio output 'where date_field='embeded date value'.

Iwas directed to an iTunes Store in the UK and now can't get back to my own store in Canada. Anyone know how?

Anyone know how I can get back to my iTunes Store in Canada? I seem to be in one in the UK.

Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
If you find that it is set to the correct region, log out of your iTunes Store account, restart your iPad, and sign into your account again.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I almost always receive the message "[filename] file couldn't be opened" when opening an existing Pages file in iCloud. Does anyone know how to fix this?

I am using a MacBook Pro running Yosemite 10.10.2, using Pages 5.5.2.
I've tried signing off and on, and restarting my MacBook, which sometimes works, but the problem re-occurs. Same problem using Apple Numbers and iCloud.
Opening local files seems to work more consistently.
This issue has made Pages and iCloud fairly useless to me. Does anyone have any ideas how to correct this?
Thanks.

Hi Ibo,
This is what just worked for me:
In Finder, I've dragged all Pages files from the iCloud Drive to the Documents folder on my iMac. (Finder asks your confirmation to remove the files from iCloud; confirm that)
Once they were on my local hard drive, the files could be opened again.
It looks to me as if something has changed in iCloud quite recently, leading to this mess. Not the first time, I've had this before. Now it's back. Sigh. And, as you wrote, it renders iCloud fairly useless. Back to Dropbox I suppose.

I've gotten myself into the FRENCH iStore and don't know how to get back to the one in the USA. Does anyone know how to do this?

Similar Messages

Maybe you are looking for