I've imported a lot of 8mm tape into a single project. I need to split off

I imported many hours of 8mm tape into iMovie. There are about 40 clips now and I want to split the 40 clips into about 7 different projects to edit individually. I don't want to re-import the 8mm tapes (read: I want to safely split off the clips without losing valuable import time).

Now that you have one project go to the clip you want, select it, then go to share, select Full Quality, click the box selected clips, save the name and it will make a dv file with those clips. Then after you have all the clips into a seperate folder start IMovie, create new project and drag the clips you want for that movie. It does take time to write clips into new file. You also need a good amount of drive space.

Similar Messages

8MM Tape into iMovie

Been transferring 8mm tapes into iMovie via my Sony TRV350 camcorder and firewire cable. Goal is to convert all of these to DVD via iDVD. 2 questions-
1) Should the "Automatic DV Pillarboxing & Letterboxing" box be checked?
2) On my camera settings, it has a A/V--->DV OUT option, which can be turned ON or OFF in the menu VCR settings. According to the manual, when it is OFF, it is "to output digital images and sound in analog format using your camcorder." When it is ON, it is "to output analog images and sound in digital format using your camcorder." I have tried importing with both settings (ON and OFF), and it imports fine both ways, and I haven't really noticed any difference. Do you think this actually matters? The 8mm tapes are analog and I want to convert them to digital format (DV), but it appears it's doing that with either setting.
Any help would be greatly, greatly appreciated. Thanks for your time.

My iMovie version 4 doesn't have those options, but I am guessing they are for 16:9 and other widescreen formats. Your old 8mm video is likely standard 4:3 ration, so you probably don't need those checkboxes.
I think the DV Out only matters if you need the video to be present on the analog output jack on the camcorder (looks like a headphone jack like on an iPod). My thinks that that you always get video output present at the Firewire port but the analog port is probably off when you have DV Out set to ON. So as you found, if you are not using the analog port, it doesn't really matter.
Enjoy,
Patrick
p.s. after several years, I am finally up to analog tape #12 with two more after than to finally finish my analog to digital conversion using my old Sony TRV330 Digital8 camcorder.

Is it possible to capture an entire DV tape into a single .avi

I am capturing DV tapes and even if I uncheck the "split scenes" option in the capture window, PE7 still splits the scenes into many .avi files.
Is it possible to capture an entire DV tape into a single file?
Thank-You for your help.

Steve
The split is completly turned off and I am getting multiple files anyway!

Getting video Hi8 8mm tape into MacBook--via another camcorder??

I offered to take the video from our school's music program and put it through its paces in iMovie to make a DVD for the school.
I figured that this would be no problem. I've used the school's Sony Mini DV Digital Handycam (DCR-TRV18) before and simply plugged the firewire cable into my Mac and imported.
I later found out that the video was shot with a different camera--a Sony video Hi8 (CCD-TRV43) that uses 8mm tapes. I'm not even seeing a firewire connection on the camera--just black and yellow audio and video RCA input jacks.
Is there anyway to do what I need to do with these two pieces of equipment? Can I somehow hook the 8mm camera into the mini-DV camera and then into my MacBook via firewire? Sort of the through-put that I hear about?
Since this is for school and a one-time occurrence, I really don't want to have to purchase any additional equipment.

I really don't want to have to purchase any additional equipment.
You may have to.
To get your Sony Hi8 video into iMovie, look at the Canopus ADVC300. Audio and Video go in, FireWire comes out. It also comes with a nice Macintosh application that works flawlessly with iMovie 06 and iDVD 08/09 (I have used it a few times with iMovie 08 and 09).
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source and convert it to FireWire (iMovie will treat it like a camera).
http://www.canopus.com/products/ADVC300/index.php
I would use iMovie 06 with iDVD 08/09, why?
iMovie 08/09 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
If your primary workflow is editing DV clips and making DVDs, iMovie '06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie '08 / 09, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 and iDVD 08/09 is a "lossless" combination.

HT4913 It says that when I turn on I tunes match that it will erase the music library on my iOS devise and replaced by what is in the cloud. But I have imported a lot of cd's into my iOS devise and don't want to loose those songs and I don't want them del

I Had to reinstall windows on my computer. I made sure all my songs etc were on my iPods/iPad. Now when I plug the iPod in it says (in iTunes Match) that my music library will be deleted and replaced by what is in the cloud. However I don't want those songs erased. I want them to go up to the I tunes match cloud.
so that I can down load them again.
also how do I get I tunes match to remember my playlists? It only has album etc.
thank you so very much. I appreciate any help.

See Recover your iTunes library from your iPod or iOS device.
tt2

Will FCE 4 Import Analog 8mm Tapes (unlike iMovie '08)

Hello--
I've had a heck of a time importing my older analog 8mm tapes onto my MacBook and was wondering if dropping bigger bucks on FCE 4 will help.
Since iMovie '08 for some reason won't import analog 8mm tapes from my Sony TRV-330 Digital8 camcorder, I've had to import the tapes using iMovie HD. The problem is then I have to save the iMovie HD project before I can import the video into iMovie '08 where I want to tag and edit it...and this takes a lot of extra time (hours per tape).
On other discussion boards, people have suggested using other video importing applications such as Vidi, iDive, and QuickTime Pro. The first two didn't seem to work out for me, so I just spent $30+ to get QT Pro...that was a mistake because the video and audio quickly got out of synch which was completely unacceptable (some of my older tapes have periodic video and audio dropouts due a problematic camcorder at the time, which I understand can cause that problem...but it didn't seem to be a problem for iMovie HD).
So, since I've read on these FCE discussion threads that FCE uses QuickTime it makes me wonder if I'd have the same video/audio synch problems in FCE (if it even would import analog 8mm video at all).
BOTTOM LINE: Has anyone successfully imported analog 8mm videotapes from a digital camcorder into FCE 4? I'd really like to be able to catalog, tag, and edit ALL my tapes (analog 8mm and Digital8) in iMovie '08 (but am willing to try to do it in FCE 4 if that's a better comprehensive solution). When will Apple fix iMovie '08 to make the lives of those of us who want to transfer old analog 8mm tapes easier??

Thanks for the response, M.R. I didn't know QuickTime was also the import engine for iMovie HD...if that's the case, I don't know why iMovie HD would import my analog 8mm tapes while iMovie '08 doesn't (assuming iMovie '08 also uses QuickTime as the import engine).
I haven't really considered a converter box since the Sony TRV-330 camcorder does the analog to digital conversion...seems like it'd be unnecessary. Do you think there's the possibility that the output from a converter box would look different than the output from my digital camcorder to iMovie '08?
--Bill

Importing VHS & 8mm tapes at highest quality?

I've been using the VHS-to-DVD USB device to import old VHS and 8mm tapes to my Mac (using S-Video cable, then work on them in iMovie. Simple, but I'm wondering if there are alternative means with higher quality results. The mpg files I get are 640 x 480. Are there some professional products that are significantly better, or should I be satisfied with the current results?

I have been using iMovie, since iMovie 02 (and now use iMovie 06 and iMovie 11).
I have been constantly exploring the best way to convert VHS to DVD with a Macintosh.
I like the Grassvalley ADVC300 A/D coverter.
I've played around with countless other conversion systems, ranging in price from $79 to $399. Short verison, this is the ONLY unit to own. No dropped frames at all, even with questionable quality tapes, no jitter, great color, excellent sound quality. Zero setup with iMovie 06 and iDVD 09/11.
This is a prosumer deck. The time code function is alone worth the price if you have old analog footage. Absolutely NO "Out Of Sync" audio.
ADVC300 is for anyone who wants to do editing and is concerned about quality of color and speed, for the novice it is an incredible gizmo that will restore VHS tapes to a state close to the original fixing midtones, highlights and shadows on the fly. Not only can you simply convert analog to digital you can actually manipulate the signal going in (if you want to).
A bit pricey but it WORKS.
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material.
For maximum quality use iMovie 06, or Final Cut Express. If you don't need to do fancy editing, then there's no reason to have Final Cut Express.
Your workflow is editing DV clips and making DVDs, iMovie '06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels, aspect ratio, and original quality.
iMovie 06 and iDVD 09/11 is a 100% "lossless" combination and my DVD's look like they came from Hollywood!

Transfering 8mm tape recordings to iMovie or iDVD.

Hi, I am new to video recording / editing and have a number of 8mm & VHS tapes that I would like to put together for a DVD to give as gifts to my children. The camera is about 15 years old so the only output is through a 3 wire video and stereo cable. Do I need another type of cable or is there an 3rd party application or piece of equipment that I need?
Thanks,
iMac Mac OS X (10.4.8)

You can do both 8 mm as well as VHS > iMovie > iDVD but you will need some way to import the video footage into the computer via firewire or iLink.
The least expensive approach is to purchase a minidv camcorder with analog to digital pass thru features. This will allow you to connect your existing camera to the minidv camera which will act as the interface to the computer allowing you to import your VHS or 8mm tapes.
Another approach is to use a sony DA1 or DA2 media converter box but these units often run as much or more than mini dv camcorder. Canopus also makes such devices.
Hope this answers your question and good luck.
btw, I highly recommend using firewire over any USB device/s to convert you footage simply because iMovie and iDVD6 are made to interface well with i/Link or FW and not as well thru USB.

Importing a cassette tape into I tunes

Can I import and save a cassette tape into itunes thanks

You can't import the audio from your tape directly to iTunes you need software to digitise the audio first. One way is to connect your Cassette deck (through the Tape out sockets of your amplifier) to the audio in socket of your computer. On the computer you'll need audio editing software to capture and edit the resulting long file into individual tracks that can be added to the iTunes Library. There are a number of commercial programs for this (I use Sound Studio for the Mac). If want to try out the process first you could try the open source program Audacity which has Linux, Mac and Windows versions at this link: Audacity
In addition to the software you'll need RCA to 3.5 mm audio plug cables to connect the Tape Out sockets of your amplifier to the audio inputs of your computer. There's a short guide to recording here: How to record from vinyl and cassette to a computer also from the BBC Copying Vinyl Recordings to CD
If your Mac or PC hasn't got an audio in socket you can have a look at the Griffin iMic which connects to a USB port and comes with some software of it's own: iMic USB audio interface

IMovie Stops Importing at Break in 8mm/VHS Tape

Hello:
I am using iMovie 11 with a Grass Valley ADVC-300 to import old (20+ years in some cases) VHS and 8mm tapes - primarily old home movies. My problem is that whenever there is a break in the tape where the video signal ends (i.e the camera was stopped and recording started at a later point in the tape) iMovie loses the signal from the ACVC-300 and it stops importing.
The converter works very well for the tapes I have tried so far, but I would like to be able to import an entire tape without having to catch every break that occurs and avoid sitting at the computer while the tape is importing. I would like to be able to keep importing regardless of the breaks, and then edit these out as necessary when the entire tape is imported. I have no drop outs when a video signal is present.
FYI - I have iMovieHD and tried importing with it as well, with similar results. Any help would be greatly appreciated!

I also am having the identical problem while using the ADVC - 300. I am using manual mode which should just keep recording through breaks but doesn't. If you find an answer please post here and I will do likewise.
Thanks.

Importing 8mm tapes,

I converted 8mm tapes using a digital8 camcorder but think the camcorder has issues, because I just picked up a 8mm camcorder and footage looks better, not noisy like on the d8, anyhow now I have a canon elura set up with pass through ready and an analog camcorder, I have 2 options, basic video cables for input to the mini dv or s-video, which should I use?

That's not so good. Perhaps check this recent post about a video "cleaner."
http://discussions.apple.com/message.jspa?messageID=7188567#7188567
Thanks,
John

Importing A-Dat tapes into Logic

I have lots of 8 –track Adat tapes of recording sessions that I’ve done for the last 10 years or so. The recording session were for various Jazz projects. I have rough mixes from those sessions that I’ve been able to listen to. But, I don’t have a A-Dat player. So the original A-Dat tapes have gone un-used for some time.
The thought occurred to me that maybe I can import the a-Dat tapes into Logic and mix and master them on my own. The thing is that I’m not totally sure of the “best” way to go about it.
At the moment, I am using a small Firebox interface. I suppose that I would need to get a larger 8track interface like maybe a Firepod? I would also need to buy a A-Dat machine. I’ve seen these on E-Bay for a couple of hundred. I would imagine that I would take each of the 8 A-Dat track to a separate input on the Firepod, create 8 new audio tracks in Logic, press record in Logic and press play on the A-Dat?
Is that it? Or is there a proper way to do this that I don’t know about?
Thanks,
Morris

Hi,
Yes you can definitely import your ADAT tapes into Logic.
Here's how to solve the issue:
1.You should buy an ADAT tape machine,make SURE you get the right one,as the newer one recorded at 20bit,and the older(blackface)only did 16bit.This part is crucial.I would probably recommend you get as newer an ADAT machine as possible,and look for low head hours too.
2.Buy an audio interface that supports the ADAT lightpipe format.Usually this can be from a cheap box to an expensive one.Just make SURE it does support the ADAT standard.
3.Buy 2 ADAT optical lightpipe cables long enought to connect the ADAT machine to your audio interface.You WILL need both cables to ensure correct digital audio synchronization.
4.You will need another interface,such as a Unitor8mkii or a Motu MTP/av USB model,in order to slave Logic to you ADAT machine via MMC protocol.Please refer to chapter 19 Synchronization page 605/619 of the Logic Pro reference manual to learn how to sync Logic to the ADAT.
5.Yes,you would be able to record ALL 8 ADAT channels at once,in one "pass".
Just make SURE you read the manual in step 4 thoroughly and test your setup BEFORE recording,to ensure you are doing it correctly.
Cheers

Converting 8mm tape - please read for detailed question

Hi everyone - A few months back the Apple forums helped me convert old tapes to iMovie using my Canon camcorder as a pass-through, converting the tapes from AV-DV. (These were tapes that fit into a VHS adapter, so I plugged my VCR into my camcorder, then into my iMac and used iMovie for the project).
I'm now faced with a similar project, only this time, the tapes are 8mm tapes. I went out and bought an 8mm player (not camcorder), a Sony EVO-511 NTSC. I've checked the machine by using regular cable wire and plugged it into my tv and it works great. However, when I plug the Sony machine into my camcorder (Canon) and use it as a pass-through, it's not recognizing it so iMovie has no 'import' button (it usually becomes 'available' once it recognizes something's plugged in).
Since the set up would seem identical for the VHS conversion as for the 8mm machine, any ideas on what I can do differently? I even purchased an adapter that has a cable male on one end and an rca female on the other, so I can plug the cable wire directly into my camcorder. Any help is GREATLY appreciated - even if it's to steer me to another forum.
Thank you!

I have a couple of thoughts. First, is there a tape in the camcorder that might prevent the pass-through?
Second, can you PUT a DV tape in the camcorder and record from the Sony 8mm to it? If so, you could copy all the 8mm tapes to miniDV tapes and then import those into iMovie. I did it this way for all my VHS tapes because I wanted to have them 'digitized' as originals to save.
I also export all my created iMovies back to my camcorder onto DV tapes and save those. You never know if DVDs will become lost, corrupted, broken, etc and I want to have double backups of my movies

Converting Sharp VL-AH30 8mm tapes to DVD.

Does anyone know how I can hook up the Sharp VL-AH30 Camcorder to my MacBook? It has a single audio/video output that splits into one audio jack and one video jack. I'm just trying to convert some old home videos (8mm) to dvds... so I really need to know the cheapest way... and easiest.
Thanks!

Basicall, iMovie works with miniDV tapes rather than straight from DVD. What you will need to do is convert the 8mm films to mini DV tape format or have them put on a VCR tape from which you can use your VCR to pass through a miniDV camcorder into iMovie in the miniDV format. So the simple answer to your question is convert your films to the mini DV format. Not knowing what other equipment you have, it's hard to give specific recommendations, but here is what I did with some of my father's films from the 1940's:
*Sent the films to a commercial company to convert to mini DV tape format.\
*used my DV camcorder to import into iMovie and edited to my heart's content.
I also converted some old video tapes by using my camcorder as a pass through device (basicially played the tapes from my VCR to my camcorder so that it would convert to the miniDV format and deliver to my Mac.) Others have used devices made by Canopus to do the same thing.
Hope this gives you a start.

Problem importing "still" images from DV tape

(Setup: iMovie 9, OS X 10.58, Pansonic NV-GS250)
Hello everyone,
I m trying to solve the following problem:
I need to edit (fades, overdub etc.) a movie which has been mastered by someone else.
The DV tape I am trying to import has a lot of "still" sequences that were generated as follows:
- The source DV tape was paused while the target (master) DV recorder was recording e.g. for five seconds.
This works fine on the resulting DV tape: The paused frame from the source tape is shown e.g. for five secs, then the next "real" clip is shown seamlessly.
However, upon import from the camera/master tape, iMovie discards these pseudo-still images: They show up as 0 kB files in the event folder.
This happens both with manual and automatic import.
I do not have access to the source material, i.e. the raw tapes and clips that were used this way. This means I cannot "rebuild" these discarded clips.
Does anyone know how to solve this problem - i.e. have iMovie recognize these clips that are actually paused source material?
Or is this something that would require Final Cut? Or may a third-party tool? I would send a few bucks if necessary.
Thanks in advance!

Hello,
thank you for replying, but I probably didn't describe the problem properly ...
You suggest dragging a clip from the event into the project and then creating a Still Frame from it.
I cannot do this because iMovie will not import these clips *at all* - i.e., they are not physically present on the Mac although they show up on screen during import.
Here is what happens:
- Let's say I have three clips on my Digital Video Tape:
- the first is a short, "real" scene,
- the second was generated by pausing the source camcorder and recording this paused frame on the master camcorder for a few seconds
- the third is another "real" scene.
The resulting DV master tape (which I am working with) plays back properly on the camcorder: scene 1, scene 2 (a paused frame), scene 3.
When importing this into iMovie, I end up with these files in iMovie's event folder:
"clip-2009-07-02 01;55;37.dv" 34 MB
"clip-2009-07-02 01;56;10.dv" 0KB <-
"clip-2009-07-02 05;51;26.dv" 21 MB
I.e, iMovie discards these clips upon import - so there is nothing to generate a still frame from.
So I need to get around the import problem.
Even a third-party tool for importing such "paused still frame" clips from a DV tape would help. I just need to get them onto the Mac HD.

I've imported a lot of 8mm tape into a single project. I need to split off

Similar Messages

Maybe you are looking for