I'VE STARTED AFRESH ON MY C DRIVE - HELP NEEDED WITH ARTWORK ETC

I deleted the itunes from my external hard drive and am now downloading it from this site to my computers c drive, all of my 13,000 songs are on my harddrive and all of the albums artwork are in a folder on the c drive - not sure how.
I want to reload all of the songs into the nue itunes but keep them on the D drive and also apply all the artwork- how is the best way to go abou this?
Thanks in advance.

Right, I'm loading the songs back into my new down loaded itunes by dragging and dropping from my H:drive (external hard drive) and the artwork is being loaded as well although thats all on my C: drive, I have changed the location of the songs in the itunes - so far so good, am I right in assuming then that I should be okay for now then, the music is all on the H: drive but the itunes is on my C: drive??
Thanks

Similar Messages

  • I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

    I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

    Hello,
    That means it can find the Hard Drive, or can't find the things needed for booting.
    See if DU even sees it.
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss....

    Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss..

    The startup disk may need repairing.
    Startup your Mac while holding down the Command + R keys so you can access the built in utiliites to repair the startup disk if necessary or restore OS X using OS X Recovery

  • External Hard drive help: use with mac and pc? how to backup everything etc

    Hello! I need some help regarding a new external hard drive I got from OWC. It is a 500 gb firewire 400 + usb 2.0 7200 rpm hard drive. I am running it from firewire. The software suggests the first thing you do is make a clone of your macbooks internal hard drive, that way if it fails later you can use the external to back everything up. If I do this ...
    1. do I have to make the drive "Bootable" ? I have software called Data Backup 3 by Pro soft I think. It came with my external.
    2. Can I still back up other stuff like my audio recordings and record onto that drive to a seperate folder?
    3. If I make a bootable copy will it try and boot from the drive everytime I turn it on or something?
    My other question is... how can I use this drive with a pc? I have a pc as well and I heard that the only way it will work is to format it in ms-dos mode (fat32?)
    If I write it to fat32 will it slow down my drive or make it worse? I heard that you should format external drives specifically for mac if you have a mac; so it will only work with macs...
    (sorry this is going on and on; it's like a chain reaction of questions)
    so If its formatted to mac drive format then can I do this with my current situation:
    1. I have wireless internet, the router is on a pc downstairs
    2. Can I send files over a network somehow from the pc to my mac
    3. then store it on my external?
    If so can someone point me in that direction with a link?
    Thank you for reading, sorry for making this so long.

    1. No, you don't have to make a bootable clone.
    2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
    3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
    If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
    FAT32 is slower for read/write on the Mac than using Mac formatting.
    Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
    You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
    Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
    Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
    Mac OS X 10.5 Help- Sharing with Windows computers

  • [Solved] help needed with wireless setup (ralink 2860 driver)

    Hi,
    I'm new to Arch so please be gentle ;-)
    I recently upgraded hoping to find improved support for my wireless.  I now find that the kernel recognises and loads the appropriate module:
    [root@akoya ~]# uname -a
    Linux akoya 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686 Pentium(R)
    [root@akoya ~]# lspci | grep Net
    05:00.0 Network controller: RaLink RT2860
    [root@akoya ~]# lsmod | grep 2860
    rt2860sta 514808 1
    I checked over the kernel source and the rt2680sta module is the code from ralink cleaned up for the 2.6.29 kernel.  (I tried building the ralink release but it needs patching for 2.6.29)
    However getting the thing to connect using WPA is another thing altogether
    [root@akoya ~]# ifconfig ra0 up
    [root@akoya ~]# wpa_supplicant -B -Dwext -i ra0 -c /etc/wpa_supplicant.conf
    [root@akoya ~]# dhcpcd ra0
    ra0: dhcpcd 4.0.12 starting
    ra0: waiting for carrier
    ra0: timed out
    I'm not even sure if iwconfig is communicating with this driver (though I can find my router using "iwlist ra0 scan"):
    [root@akoya ~]# iwconfig ra0 essid "sodor"
    [root@akoya ~]# iwconfig
    ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA"
    Mode:Auto Frequency=2.412 GHz Access Point: 00:21:91:FE:DA:97
    And if I try to configure using wicd I see the following log when trying to connect to the wireless:
    2009/04/17 01:16:43 :: Connecting to wireless network sodor
    2009/04/17 01:16:43 :: Putting interface down
    2009/04/17 01:16:43 :: ifconfig ra0 down
    2009/04/17 01:16:43 :: Releasing DHCP leases...
    2009/04/17 01:16:43 :: Setting false IP...
    2009/04/17 01:16:43 :: ifconfig ra0 0.0.0.0
    2009/04/17 01:16:43 :: ifconfig eth0 0.0.0.0
    2009/04/17 01:16:43 :: Stopping wpa_supplicant and any DHCP clients
    2009/04/17 01:16:43 :: killall wpa_supplicant
    2009/04/17 01:16:43 :: Flushing the routing table...
    2009/04/17 01:16:43 :: route del dev ra0
    2009/04/17 01:16:43 :: route del dev eth0
    2009/04/17 01:16:43 :: Attempting to authenticate...
    2009/04/17 01:16:43 :: ['wpa_supplicant', '-B', '-i', 'ra0', '-c', '/var/lib/wicd/configurations/002191feda97', '-D', 'wext']
    2009/04/17 01:16:43 :: Putting interface up...
    2009/04/17 01:16:43 :: ifconfig ra0 up
    2009/04/17 01:16:43 :: iwconfig ra0 mode Managed
    2009/04/17 01:16:43 :: ['iwconfig', 'ra0', 'essid', 'sodor', 'channel', '1', 'ap', '00:21:91:FE:DA:97']
    2009/04/17 01:16:43 :: WPA_CLI RESULT IS None
    2009/04/17 01:16:43 :: Failed to find status in wpa_cli result
    2009/04/17 01:16:43 :: exiting connection thread
    It is driving me crazy being tied to a cable so I'd really like to get this working... but I'm really not sure what to try.  Do I need to rebuild wpa_supplicant?  If so is there a package-based way of doing that in arch?
    Thanks in advance.
    Last edited by drandre (2009-04-17 19:40:41)

    drandre wrote:
    If so is there a package-based way of doing that
    OK... to answer my own questions ...
    two questions:
    1. Does this mean support for the ralink driver is included by default or *not* included by default?
    It seems it means *not*
    2. If I uncomment this line then makepkg refuses to build the package because the config file's md5 is no longer valid.  How then am I *meant* to make modifications to the build configuration?
    right or wrong I used makepkg -g to generate checksums for my modified config file and pasted these into PKGBUILD.  It then builds happily.  After installing I can run wpa_supplicant with no args and confirm ralink is in the list of drivers.  Excellent.  But still no success.
    Two things I have noticed:
    1. wicd places quotes "" around my pre-shared key.  If I run wpa_supplicant from the command line and use the conf file created by wicd it reports the PSK as being unparsable.  If I remove the quotes then the file is parsed correctly.
    2. It doesn't solve my problem :-(

  • Help needed with Time Machine multiple drives set up

    Hello, I need help in finding out if what I want to do is possible.
    I upgraded to Mountain Lion today as I understood it can handle multiple back up drives. I see how to add a 2nd back up drive, however I do not see a way to put different folders onto different drives.
    iMac - backed to a 3TB DRIVE A via the time machine
    iPhoto Library original file - already on the 3TB DRIVE A - so no back up for now!
    What I'd like to do is to also back up only the iPhotoLibrary file to a 2nd drive - lets call it 3TB DRIVE B
    Can it be done with Mountain Lion or not really? I don't even seem to be able to exclude files from an External Disk actually.
    Any other software I could use that would do the trick?
    Or do I have to rearrange our already messy set up? I've put the iPhoto Library on the DRIVE A as its a faster drive. but I guess the solution would be to put the iPhoto Library original file onto the slower Drive B and only keep the iPhoto file on it?
    Hmm any help or tips greatly appreciated.
    Thank you in advance.
    Marta

    Sharlo wrote:
    So here's my question: After reinstalling system TM started normal back-up procedure and I get message not enough space on external disk. I use 200Gb for around 100Gb that I have on my computer (I know not so much but works well for me). What I do not get is why does TM need around 30% more space compared to the space I'm using (wants to back-up 130Gb) and why is it not backing-up the system I've just installed but tries to back-up everything from scratch? Is there a procedure to back-up only changed files since the last version?
    Ordinarily, that's exactly what TM does. But this situation isn't ordinary. Everything you restored is considered "*new to that disk"* and will be backed-up again. See #14 in the Frequently Asked Questions *User Tip* at the top of this forum, and http://support.apple.com/kb/TS1338
    The 30% you ask about is actually 20%; the initial estimate of the space needed might be low, and TM needs workspace on the TM disk, so it adds 20% (see #7 in the FAQ Tip.)

  • HELP I am missing 340 gig's!! "hard drive help needed"

    ok so i had a 160gig hardrive in my macbook pro. i bought a new 500gig for it. i used Drive Genius 2 to copy the old hard drive to the new one. when i installed the new one everything works great except it only see's the 160 gig not 500? so my question is how can i make my computer recognize the whole hard drive?
    thanks for any and all help!!

    Start over by first prepping your new drive as follows:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from theUtilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Connect your old drive that you have installed in an external enclosure and boot from it by restarting the computer and after the chime press and hold down the OPTION button until the boot manager screen appears. Select the icon for the external drive and click on the downward pointing arrow button. Now clone back to your new drive:
    Clone using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the internal drive.
    Source means the external startup drive.

  • Transferring iTunes Library to an external hard drive - help needed

    I recently moved my iTunes library (aka all of my 32 GB of music) onto an external hard drive so as to save space on my laptop, but I messed up somehow and now I can't add songs to my iPhone. The chain of events went something like this:
    1. I copied my iTunes library onto my external hard drive.
    2. I changed my iTunes library location (in the itunes settings) to it's new spot on the external.
    3. I deleted the songs off my laptop.
    This worked fine at first, but then I think I opened iTunes with my external NOT connected and I got a blank library. I plugged in my external but my itunes was still blank. Then I decided I'll just add everything back to my itunes library. I did that, but I lost all my playlists and whatnot, but I didn't really care - all my music was there.
    Now I just tried to add new music to my iPhone and it won't let me. When I try to turn manual music management it gives me an error saying "this iPhone is synced with another itunes library".
    Is there some way I can retrieve my original itunes library from before I did all this stuff? Help much appreciated.

    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to choose a library, then select the copied iTunes folder.
    If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music  then you don't even need to start with the option key held down, iTunes will automatically look for it there.  (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)

  • Help needed with iTouch not appearing as a hard drive ?

    Hi all, 
    I need some important data that I had saved in my itouch as disk drive.  Usually when I plug my itouch into pc, it will auto-play on windows and will show it as disk drive. It will also auto-sync to my itunes. I can also find the disk drive through "my computer". 
    For now, it can still connect and auto-sync to my itunes. However, it is not working and showing as a hard disk now. Neither can I find it in "my computer".
    Is there any way that I can retrieve the data? Help please~  Any advice would be appreciated. Thanks!

    hmm, I did not use any program to get documents into the itouch. It is the 1st/2nd generation itouch so it originally has disk mode .
    Previously the itouch went dead and I sent it to the apple service center. They told me that it is not worthwhile repairing it so I just brought it back and kept it without using it. I took it out to try again this morning while clearing up my stuff and it works! I have not been using this itouch for quite a while so I'm not too sure why it will come back from the dead ^^ To make matter worse, my external hdd crashed so this is my last copy of my documents.
    Anyway, I will try the few programs that you recommend to see if it works. Thanks!

  • Help Needed with getting Started With Office 365 Development C# Rest API

    We have a O365 Tenant Setup with a Federated Active Directory Setip we want to be able to right code that will connect to our tenant and perform basic CRUD operations against it (ex. Creating mail boxes)
    The problem is we want this to be contained in a CLR trigger In SQL so say if a new user is added to our user table then we would create a new AD account for that user and also create a mailbox.
    But I cannot find and example on how to connect to Office 365 using the REST API (Not the SDK because you can not add the connected service to a class library) and before the required actions that we need to do. All the example I have found are with the
    SDK API and/or require window 8 and that is also not an option.
    Please help I do not know where to start, and I would love to see some examples done in c# and not using the SDK.
    Thanks,
    Andrew Day

    Hi,
    >> Instead of SharePoint URLs I would use the O365 API URL?
    Yes, in my sample code, I was accessing the File resource by using the O365 File API. In your case, you need to acquire the token to access the Mail resource and use O365 Mail API.
    By the way, I think the article
    Understand Office 365 app authentication concepts will help you to understand the authentication process in Office 365 Development.
    >> Why can I not use the SDK API with a class Library?
    Actually, you are able to reference the Office 365 .NET SDK in the class Library. But the class library project type was not supported by Visual Studio Office 365 Development Tool. As a workaround,
    you can reference the SDK manually in your project.
    Since your original question is about “getting started with Office 365 Development C# Rest API”, if you have more questions about the Office 365 SDK, I will suggest you posting a new thread
    to discuss the Office 365 SDK. It will involve more other community members to share their ideas and experience on a specific a question and for others who had a similar question could also find the valuable information quickly.
    Regards,
    Jeffrey
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Help needed with the installing from a USB drive

    Hi, My HD failed and will not boot on my A665-3DV. I was able to retrieve all the data from both the partitions to another computer. I copied the data from the HDDRecovery partition to the USB flash drive. How do I use that data to install to a new HD?
    Please help. Thanks!

    It's not really hidden. You can connect the hard drive to an external device like coolmax (Coolmax CD-350-COMBO USB to IDE/SATA Device Adapter) which plugs in to a USB port on any PC. You can view the contents in explorer just as any other external HD.
    Of course it took me a while to make the HD work (I beat the S**T out of it on the sides every time it didn't work). It took me a few days to get all the content out of it. It still would not work if I plugged it back into the laptop. 
    I made my flash drive bootable (http://www.ehow.com/how_5215265_make-bootable-flash-drive.html) 
    Copied the contents of the HDDRecovery partition to the flash drive and I was good to go.
    Hope that helps!!

  • Installing Logic on a PT drive - help needed

    My first post here, hello everyone.
    I am having problems getting Logic 7.1 to work on my G5 Dual 2Ghz. I have Pro Tools HD TDM 7.1cs4 working OK, and wanted to test Logic out (with CoreAudio, not with TDM). Basically when I load Logic, it scans Audio Units slowly (but with several; "the application auval unexpectedly quit after it reopened" messages to which I press "Reopen"), then opens with the usual splash screen, then a dialogue box comes up saying "No Memory for Instrument". Pressing "Abort" brings up this screen many times before Logic opens, but only shows an automation tracklist which cannot be recorded to.
    I have Logic 6.4.3 installed in the apps folder (wondering if this is a problem) but this does not open (as I think it won't work on 10.4), But when I installed Logic 7.0 from the DVD, it did not erase Logic 6. Sorry, this is may be pretty basic stuff but I'm not that familiar with Logic's quirks as I haven't used it on a G5 at all.
    From reading other posts I sort of gather that Logic 7.1 and PT 7.1 can co-exist on the same G5 partition so long as they are not used together.
    I should also explain that Logic 7.0 doesn't seem to want to even load; so I dragged a copy of 7.1.1 which I've used on my laptop, onto my G5 drive - maybe this is the wrong approach...!
    Any help appreciated, thanks.
    G5 Dual 2Ghz   Mac OS X (10.4.3)  

    Hopefully you installed PT first. Part of the problem may be 7.2 (Logic). That is the version for your PT version-though how much of an effect that has on digi as CA is greyer. Try first running Logic as CA using built in audio-after that you shouldn't have to continue with AUVal. If you then get past AUVal try configuring the digihw as CA and then enabling it in Logic. IF it is 7.2 dependant (which with CA it shouldn't be under normal circumstances) that's the answer. But more likely narrowing it down and eliminating suspects is the way to go. You can also try CA digihw with other audio apps and see if you have any similar problems.

  • Help needed with formatting an external drive

    Like some of you exoerienced problems with my external drive on upgrade to 10.5.5. To cut a long story short, bought a Western Digital 500GB Studio already configured for mac. Backed up with time machine. The drive does not boot on startup of my Intel iMac as its the partition map is APM and not GUID. For some reason, when I access the drive in Disk Utility and select Partition, the Option button is greyed out i.e. read only and therefore I can't select GUID. Any ideas how to resolve this?

    You cannot boot from a TM backup in case you did not know that.
    In order to re-partition the drive for GUID you must:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Select the number of partitions from the drop down menu. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    Be aware that this is a destructive process and all data currently on the drive will be lost.

  • IrisPen Express - help needed with driver no loading

    Anyone use IrisPen (Express or Executive; they don't sell IrisPen II anymore) with their MacBook (I'm using os.10.4.8)? I used IrisPen II with my old Windows and the hand scanner worked great. But it was old and not working well.
    Bought new IrisPen Express & after installing software & rebooting (putting pen into USB after installation & before restarting) the software still doesn't recognize the pen. It says: "pen unplugged; driver unloaded."
    Tried everything I can think of. Called IrisPen (un)support help desk and they recommended testing the pen. Instead I bought another new IrisPen, thinking my 1st pen was bum. Now 2nd pen still a problem. Get exact same error message!!
    IrisPen supposed to work with Mac os.x
    Any ideas?

    Had to use the Basic connection type and get the right combination of options. I can now connect to my remote Express server with my local sql developer program.

  • Help needed with starting Oracle Enterprise Manager on win 2008 server SP2

    Hi,
    i am unable to start the oracle enterprise manager. I did the following steps:
    E:\oracle\product\10.2.0\db_1\BIN>sqlplus
    SQL*Plus: Release 10.2.0.4.0 - Production on Tue Oct 12 16:59:20 2010
    Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
    Enter user-name: /as sysdba
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Productio
    With the Partitioning, OLAP, Data Mining and Real Application Testing optio
    SQL> host
    Microsoft Windows [Version 6.1.7600]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.
    E:\oracle\product\10.2.0\db_1\BIN>emctl stop dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    https://primary:1158/em/console/aboutApplication
    The OracleDBConsoleorcl service is not started.
    More help is available by typing NET HELPMSG 3521.
    E:\oracle\product\10.2.0\db_1\BIN>emctl status dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    https://primary:1158/em/console/aboutApplication
    Oracle Enterprise Manager 10g is not running.
    E:\oracle\product\10.2.0\db_1\BIN>emctl start dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    https://primary:1158/em/console/aboutApplication
    Agent Version : 10.1.0.6.0
    OMS Version : 10.1.0.6.0
    Protocol Version : 10.1.0.2.0
    Agent Home : E:\oracle\product\10.2.0\db_1\primary_orcl
    Agent binaries : E:\oracle\product\10.2.0\db_1
    Agent Process ID : 1740
    Agent URL : https://primary:1830/emd/main
    Started at : 2010-10-11 18:12:36
    Started by user : SYSTEM
    Last Reload : 2010-10-12 12:37:00
    Last successful upload : 2010-10-12 09:31:28
    Last attempted upload : 2010-10-12 16:55:14
    Total Megabytes of XML files uploaded so far : 2.87
    Number of XML files pending upload : 264
    Size of XML files pending upload(MB) : 1.34
    Available disk space on upload filesystem : 37.95%
    Agent is already started. Will restart the agent
    The syntax of this command is:
    NET STOP
    service

    Sorry mate,
    i have no idea why its showing different versions. I installed the software using the media i received thru Oracle for 64 bits.
    I started the Windows service for dbconsole. It worked for a minute and the page disappeared again. Does it have something to do with firewall. I had set the Firewall off.

Maybe you are looking for