I want Apply trigger to all the forms in application

I have written a trigger when_timer_expired,it runs only when the form is runs.
it does not execute when that form calls another form.
Is there anyway by which the can apply the trigger to all the forms In the Application .

When you call Form B from Form A then Form A is Suspended until Form B Exits.
You could use OPEN_FORM instead.
If not you'll just have to duplicate the TImer creation and WTE trigger in the called form as well.

Similar Messages

I want to put unable only the form in use!!

hi!
jdeveloper 10.1.3.0.4
i have a mdiform(mainForm) and that mainForm call a internals Frame.
when i have a internalFrame(Internal A) in runtime, InternalA call an InternalB.
When internaB have a focus, i want to can use only InternalB, all the forms must be disabled.
how do can i do this?

Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
Thanks again,
Rob

Want to get back on the former firmware: h

Hi!
I have downloaded the new firmware and I have got the same bug as the other with energy drain when the player is off. Actually, did Creative eventually heard the problem? The only thing I have seen is that they removed the firmware from their website.
Anyway, I want to get back to the former one the .02.05 How shall I proceed to ensure the good working of my Zen?
Thanks for reading!!

I think there's a cover all warning that it might reformat the player and therefore you should backup. As long as you're on a v firmware it won't reformat, but you should always backup anyway when doing something like a firmware upgrade (and in my opinion you should always backup full stop).
With the firmware reload, you just run the function from Rescue Mode, and it will take a few seconds. Then you connect the player to the PC straight after this (don't turn it off and on) and run the firmware upgrade.

When I open "Pages" all the forms are in spanish. ( I am english speaking) I travel a lot and wonder if the program picked up on me being in Spain or something similar. How do I change it to english?

When I open "Pages" all the forms are in spanish. ( I am english speaking) I travel a lot and wonder if the program picked up on me being in Spain or something similar. How do I change it to english?

See
http://en.wikipedia.org/wiki/Lorem_ipsum
If that is what you are seeing, you just select it and type in your own text.

Make all the forms at a user level or responsibility level to be read only

Hi,
Please suggest me to make all the forms at a user level or responsibility level to be read only. So that when a particular user logs in, he gets all the form in read only mode or at a particular responsibility all the forms are read only so that we can attach this responsibility to the user for the same purpose.
Any ideas will be highly appreciated.

check this blog,
http://www.oracleappshub.com/11i/oracleapps-responsibility-vs-sap-functions/
Re: How to change OM responsibility as read-only in oracle applications 11i
read only responsibility-user

HT1296 I have lots of apps that I don't necessarily want on my iphone all the time, but I don't want to delete them from my itunes account permanently. Is there a way to add apps manually?

Is there a way to manually manage apps? I have lots of apps that I don't want on my iphone all the time, but I don't want to delete them from my itunes account permanently.

Deleting apps on your phone does not remove them from your account. They can be re-downloaded for free from the App Store, or synced from your computer as needed.
The easiest way to manage apps is to connect to iTunes on your computer, go to the Apps page of your device in iTunes, select which apps to remove, then sync.

I am a SAP Netweaver Consultant , want to know from all the SAP Experts out here that according to you which are the highest paying modules in SAP ? rank them.

I am a SAP Netweaver Consultant , want to know from all the SAP Experts out here that according to you which are the highest paying modules in SAP ? rank them.

Hi S. Vishwam.
Many peoples says that BI , APO , BW and HANA are the highest paying modules.
But with the passage of time the value of the professional decreases because many people go work with this modules then ...supply and demand = decreases.
Only the people that really knows continue making lots of moneyand the characteristic of these people are the same:
They always read the SDN community of his modules.
They really study the sap help.
They do not want to make lots of money early on.
Hope helped you.

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello. I can say that you have a quite strange „huge question”… It’s non-sense to stay connected with your car which is hundreds miles away. Unless…
I have a theory. You don’t want to controll your car, you want to controll somebody who is driving the car. Volvo XC 60 is a nice family car, usually used by married men between age of 35-45, probably with small children, so it’s very unlikely that you want to controll your teanage kid, mainly because probably even if you would give him/her to drive the car in the neighborhoud, I don’t think that he/she would be „several hundred miles away”… If your child is not young teneage anymore, and he/she has his/her own life, but you want to control him/her, that is sick… So I am convinced that you want to controll your husband who probably travelling often! Am I wright?
Isnt’t nice at all! Would you like if you would be monitorized in such way? I bet you don’t!
Anyway, iPhone is smart, you can use for many things, but come on, you really were thinking that there is such kind of application???
What could you do it's to put in the car a GPS survelling system, however I don't think that you could do it without your husband knowledge, otherwise he won't be able to start the engine...

I want Firefox to open to my homepage every time after it crashes. I do not want it to return to the tabs and applications that caused the crash. I am willing to lose information. How do I do this?

Firefox crashes or seizes up when there are too many tabs and applications open, and causes my computer to crash or seize up. I use task manager to close Firefox or I restart my computer. Then, when Firefox restarts again, it automatically re-opens all the tabs and applications that caused the computer to seize or crash in first place. This is a waste of my time. I want Firefox to reopen to my homepage even if it crashes. I am willing to lose information to have Firefox reopen to a low-memory homepage. How do I do this?

Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
* http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
* http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
See also:
* https://wiki.mozilla.org/Session_Restore#Preferences
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

APPLE TECH TEAM SUGGESTED TO REPLACE MY MACBOOK PRO'S LOGIC BOARD FOR 2ND TIME?All the funtionality and applications is working fine but my screen backlight is off.If i expose it to direct sunlight , i can see what is running on my MAC(out of warranty)

APPLE TECH TEAM SUGGESTED TO REPLACE MY MACBOOK PRO'S LOGIC BOARD FOR 2ND TIME?All the funtionality and applications is working fine but my screen backlight is off.If i expose it to direct sunlight , i can see what is running on my MAC(out of warranty)

likely display inverter board.
did you get your inverter board replaced already?
Did you have a question?
If the diagnostic in shop indicates same, thats 1000X better than anyone can do online in "diagnosis" (not really genuine diagnosis of course)

What happened to all the Library and application support folders in Yosemite? How can I access them?

What happened to all the Library and application support folders in Yosemite? How can I access them?

1. They’re still there, but hidden.
2. Open your home folder, choose Show View Options from the Finder’s View menu, and check the box to show the library.
(118426)

I want to have users submit the form in PDF format but it doesn't work using the email submit button

Hi all,
I have a form that I want to be returned to a specific email address as a PDF File. This is so that reservations people can open the pdf, and extract the information from it. Keeping it as a PDF will allow them to easily read and use the form.
When I use the "Add and Email Submit button" approach, as outlined in the "How to" area, everything works fine, except that the format of the submitted file is in xml, not Pdf which is what I need it in.
I then tried adding a Button to the document from the Library, and set it's "Control Type" to "Submit". This provided me with the submit sub-tab, where I set the "Submit Format" to PDF. In the "Submit to Url", I entered the following - "mailto:[email protected]" (without the quotes)
The first approach works, but is not in the PDF format that I need (I believe).
The second approach keeps giving the following error when one selects the submit button - "This operation is not permitted".
We use Lotus Notes (yes, I know...not my favorite either, and it may be the problem here).
Any help that might be provided is greatly appreciated!!
Rob

Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
Thanks again,
Rob

I am trying to create a Form that will act as a list. I want to import data into the form from exce

My table has a list of names with product information in corresponding columns. I want to create a form that I can import this into where every row makes a new part of the form list I create. Is this possible?
Example of what I have in excel:
Name
Product 1
Product 2
Product 3
Total
a
1
2
3
6
b
0
3
4
7
c
1
3
4
8
d
1
3
5
9
Example of what I want in Form:
Customer a 1 2 3 6
Customer b 0 3 4 7
etc.
I want to put this info into a form to make it more presentable. Can anyone help me with this?

Look at the Import/Export form data functionalities already built-in into Acrobat.

My new computer wants to wipe out all the apps on my sons iphone and he has games on it that he has worked hard to get to high levels. If I allow my new computer to be the primary computer will I lose all his games or is there a way to sync without losing

My new computer wants to wipe out my sons apps on his iphone and he will lose all of his "progress" in the games he had loaded on already. Is there a way to save th info from all the apps and still designate the new computer as his new primary one?

JBapple1 wrote:
Is there a way to save th info from all the apps and still designate the new computer as his new primary one?
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.

How to reset a form instead of all the forms in the document?

I installed a button in each page of my file my (ten pages, each one with a different one form) to give the user the faculty of clear specifically through a single choice
But this reset button resets all the pages. I took care to rename this button in each page but Acrobat proceeds to execute a massive reset operation.
Thank you.

Mr Try,
You wrote the whole thing...
Thank you.
Could you please give me the last breath?
My real page numberin PDF is 25 an I tried this (placing the two pieces) without success...
function resetFieldsOnPage(p) {
 var fields = [];
 for (var i=0; i<this.numFields; i++) {
 var f = this.getField(this.getNthFieldName(i));
 if (f==null) continue;
 if (f.page==p)
 fields.push(f.name);
 this.resetForm(fields);
And then to reset all the fields on the first page, call:
resetFieldsOnPage(25);

I want Apply trigger to all the forms in application

Similar Messages

Maybe you are looking for