I want data series in Keynote chart to enter one at a time.

In older version of Keynote, data series can enter one at a time. In version 6.2, seems all series enter at once. Can different series be made to enter one at a time in Keynote 6.2?

Select the chart
Inspector > Animate > Build IN > Add an Effect
choose an effect
in the Delivery drop down menu select; By Element in Series

Similar Messages

Add data series to excel chart

I have an envelope on a chart in Excel. I would like to add same test data to the chart. I can open the workbook and get my data on a worksheet, but can't figure out how to add the data series to the chart using ActiveX.

Here is some vi's that I forgot that I had for excel. In it is one vi in particular called create chart.vi have alook at it. I'm sending you the whole llb. i have not tested them in LV 8 yet.
hope they help.
Joe.
"NOTHING IS EVER EASY"
Attachments:
excel.llb ‏2092 KB

Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

List and table controls -> listbox..is that what you are thinking of?
The listbox presents the user with a list of options, and you can set it to only accept one selection at a time...Adding new data to the list can not be done directly by the user but if you make e.g. a text control and a button you can programatically insert new objects described in the text box when the button is pressed...(see example).
If you need more than one column you have the multicolumn listbox. If you want the users to write new entries directly yu can use a table and read selected cells using it's selection start property to read what cell has been selected.
MTO
Attachments:
Listbox_example.vi ‏34 KB

Problem - over lie of data series in Line chart (Web Application Designer)

Dear Experts,
I have created a chart with below requiments from my user by using web application designer.
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
The line chart of Key Figure 3 must always appear in Front then others Key Figures.
Then following by, Key Figure 4. Last is Key Figure 5.
As I know the order of display line chart is infflucing by the order of Key Figure in structure by descending, likes below
1) Key Figure 3 (Rank of front -> 3rd; Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
2) Key Figure 4 (Rank of front -> 2nd; Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
3) Key Figure 5 (Rank of front -> 1st; Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
So, I have conflict on fulfilling these 2 request on assigning the color and control their visibility and lines over lie.
Please advice me if you have any suggestion on controlling the lines order.
Thanks!
~ GP
Edited by: GP Poh on Jun 9, 2010 12:32 PM

Hi Priya, thanks for input.
I think I should further elaborate the problems. Thanks for your highlight.
I have a lines chart with five key figures. So my chart will have five lines.
Some lines from chart will overlap if the data are same.
When overlapping of lines happens, I want to control the order of which series should be appear first.
Likes below example,
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK; Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED; Visibility: Visible/Hidden)
           KF1 KF2 KF3 KF4 KF5
CW 1    30     30    80    80    50
CW 2    40     50    90    60    90
CW 3    70     50    90    90    90
CW 4    80     70    70    90    70
As you can see, there is overlap in these value.
CW 1 KF3, KF4 -->80
CW 2 KF3, KF5 --> 90
CW 3 KF3, KF4, KF5 --> 90
The order which i want the series should appear first when overlapping.
- KF3 must appear on top.
- Then, follow by KF5
- Last is KF4.
So now, i have no idea to control the overlap orders except adjusting the sequence of keyfigure from query.
Feel free to give me any input!

Add a data series dynamically in charts

I am trying to add a data series dynamically in a chart but
it does not seems to work. Here is the sample code. Any idea?
var line1:LineSeries=new LineSeries();
line1.dataProvider=[something];
line1.displayName="New data";
chart.secondSeries.push(line1);
It works if I do the following but I don't want to remove
other series already there.
var arr = new Array();
chart.secondSeries=arr;
var line1:LineSeries=new LineSeries();
line1.dataProvider=[something];
line1.displayName="New data";
arr.push(line1);

I see...i don't know why the chart is not refreshing itself
in the next keyframe after you added another series. You can also
try to put the statement:
[myChart.series[(myChart.series as Array).length] = your new
ColumnSeries object goes here.]
in a new frame by doing doLater();
Apparently an asigninment statement on the series array does
the trick. If you don't like that approach, you can also try to
invalidate the display object, so that a refresh is forced.
-george

Showing data series for two charts on one

Hi
I need to represent 2 sets of data on one chart. The first is a linebar chart and the second is a scatter chart. This can be done in Excel by adding multiple named data series.
Is this possible with crystal report 2008.
Thanks

I'm a bit late to discussion, but this is I think the most relevant post I could find.
I have the same problem - displaying multiple data series on the same chart (line chart or scatter by date). My problem is complicated by the fact that number of series also depend on the data point.
Essentially I need to plot readout of test in a monitored room where different number of sites maybe tested depending on the room. So one room might have three data readouts (three sites), and another five (five sites), and when charting by room, one chart will have three series, and another five. So even considering using overlapping transparent charts, there are issues of conditionally enabling/disabling the whole chart, of determining maximum number of charts (and room might have dozens of test sites) and also displaying appropriate legend(s).
There must be a better way!
TIA,
Andrey.

Overlapping of data series in Combo Chart

Hi All,
We are working on VC7.0
I have three data series elements and I would like to display them in a combo chart with two columns and a line .
( 1.Actual Gross Turnover - Column
2. Planned Gross Turnover - Column
3. Actual Gross Turnover prior Year - Line )
I tried with different options present there in Configure Element , but the two columns overlap with each other i.e the highest column is overriding the lower column.
Can someone help me out in this ?
Thnks,
NR

Hi Pasha ,
yes, i am quite sure that bars are overlapping and checked with the 3 options you have mentioned.
3. I have tried streching the graph horizontally but still the same display.
2. I did moved to mouse to the edge points of bar .. it only mentioned one data series instead of two
1. See if the db column contains NON-ZERO values ? ..
I am not sure of it but when deploying the model in VC , i got a warning message saying " Zero fill is checked without Max length in field "Gross Turnover Actual " of entity " query name "
Let me know, how this efffects the display and what do i need to do to resolve the issue .
Appreciate your valuable inputs ...
Thnks,
NR

Wanted: Popup which allows the user to enter one string

Hello,
as the topic states, I am searching for a (modal) popup which lets the user enter one string in a text field and returns this string.
I am currently using the function module 'POPUP_TO_GET_ONE_VALUE' for this purpose which works quite good - BUT it has one major drawback: the string that is returned is entirely in capital letters. This is not acceptable as I want to build a case-sensitive search based on the input...
Any suggestions are greatly appreciated !
Best regards,
Patrick

Anand,
I'm just finished with your first reply - checked out 'POPUP_TO_SEARCH_VALUE' - and you already gave a second option - marvellous !
Will try the other one out right now.
You are right, the parameters that reference to the DDIC made me wonder and decide against this FM when I searched through all the available popups some time ago.
To your first reply:
the popup is quite good. It does indeed deliver a 'case preserved' string. What I don't like is the checkbox and the fact, that the confimation button is labeled 'search' rather than just the 'ICON_OK'. I should mention at this point that I reuse the popup in other scenarios where the string is not used for a search but to name certain objects. Again an all uppercase string (or all lowercase string as well) is unwanted.
Now on to the second popup...
Regards,
Patrick

How can I change the bar color (data series) in a chart on the iPad version?

The number of different. colors used in a char (line, bar, pie, ...) appears to be limited to six, quite short for my needs, however, Excel imported charts show up in the original colors (12)... until I change the chart type (to get a homogenous look with the rest of the content) it gets changed to the 6 basic colors. Any clue on how to modify individual series colors? Note that I am asking about the iOS version.
Thnx

Does any one know how you can adjust the font size (point size) for the file
names.
Sadly enough you can't chance that, feel free to add a feature request for
that, the more there ask for the bigger chance it will be realized.
It would be great if the colors for the image name (background and font color)
could be changed so the contrast could also be increased so it is also easier
to read.
And this the cheerful part, go to Bridge preferences General tap and play
with the sliders for user interface and Image Backdrop until your satisfied.
BTW using the slider for thumbnail size bottom right of the Bridge window to
increase the thumbs does not increase the font but makes it nevertheless a
little clearer.

Formatting data series in charts

Hello all,
Need help in how to format data series used in charts(pie and bar). The charts show proper data but i need the amounts in the charts to be formatted using comma separators and $ symbol. Had tried using the NSTR functions and these work properly for table data , but not for charts. Could someone pls conform if this is a known limitation with charts or is this yet another issue with ehp1 ? If so , are there any other alternatives for this approach.
Vc version is 7.01 SP5 (ehp1)
Any help would be appreciated.
Rgds

Did you try:
OracleBI/web/app/res/s_.../popbin/
EX:
line.pcxml Look for <SeriesDefinition ...
we modified the line width and a few other things. You'll have to modify all the pcxml files for all the chart types you want to customize.

Data Series Missing in the chart.

Hi ,
I have included 4 data series in the chart item.
But its displaying only one data series in the output.
that is its displaying only the last series. for eg
i have included Data series1,Data series2,Data series3,Data series4,
in output its displaying only Data series4.
what settings i have to make inorder to get all the four data series to be displayed.
Please Help.
Thanks
Tulsi
Edited by: Thulasi ram on Jun 16, 2008 9:34 AM

Hi,
GML File is developed when you are developing your apllication.
Procedure to Send the GML.
Click on Model Menu bar in the Tool bar->select Export option
Then Zip it and send to me
Regards,
Govindu

SP2010: Different colors for chart bars in Chart Web part with single data series?

Hello,
I've been asked to create a chart for visual display and summary of Status values within a SharePoint list of job positions. The list of positions includes a Status field with the only values being Open and Closed. I created a page that shows the list, and
at the top I inserted a Chart Web part that displays two bars - one showing the number of Open positions and one showing the Closed positions. Because I was having difficulty getting the totals for each Status value to show up in the chart, I followed
the instructions at
http://highbrowse.wordpress.com/2012/07/04/chart-counts-from-sharepoint-lists/ and pointed my chart at the new "Status values" list - this worked well to display the sum counts for each of the two Status values in separate bars.
This was all fine and good, except that because I am only using one data series for my chart, both of the bars (for Open and Closed) show up as the same color. I've been asked to make them different colors but cannot figure out how to do so. Can someone
provide guidance on how I could make the two bars different colors? Thank you so much.
cheers

Hello,
as far as I know, the chart web part does not have any settings to change the color of individual data points or plot data points of a series in different colors. If you only have two values in the series, you could use a pie chart instead of the column
or bar chart. In a pie chart, the different slices have different colors.
cheers, teylyn

Calculate Data Series Dinamically

Hello Everyone,
I've a requirement in Visual Composer that I would like to know if anyone can help me.
I want to build a lines chart.
In the chart you can define what you want to put in the "category Axis", that normally is defined dynamically.
In the data series you cannot define them dinamically.
For example you have this table/query:
Month/Process A B C D ...
01                     33
02                              34
03                         35
So in a lines chart, you can define the "category axis" as Month, and in this case, if you have 3 months, the chart adapts to only 3 months, if you have 5 months, the chart adapts and displays the data for the 5 months.
But for the data series, I have to insert (in my example), all the process that exist, process A, B, C, D, etc., so for example if you have 100 process combinations, but only have data for three process, you have to define your dataseries for 100 process, and all 97 process that have the value zero (or no value) are displayed on the chart and represented in the legend.
My requirement is to display dynamically on the data series, only those that have in fact values, so in my example if only the process A, B and D had values, only those process should be displayed on the chart, if for other query execution only the process B and D had values, than, only the process B and D should be displayed.
Does anyone knows how to dinamically display the data series on a chart in Visual Composer?
Thanks for your help,
Diogo.

Hello Sandeep,
For that issue I got another workaround,
let's say that one of my dataseries is named xpto_value,
So in dataseries of the chart I define a formula something like this:
NVAL(IF(@XPTO_VALUE==0,"",@XPTO_value))
So if I have 0 for the XPTO_VALUE it is returned nothing, and the line of the data serie is not printed in the chart, otherwise it is printed.
I can work with this.
But my question is I have to do that for all the data series, i.e., for all the columns of the query.
So in my case, I have for now 6 columns, 6 data series, and I can define this for all these 6 data series in the chart.
But let's say that tomorrow, I have new data on my query and instead of 6 data series, I have 8. In this case the chart is not adapt dynamically, i.e., I still have only the 6 data series, I have to go once again to the chart and create this formula for the 2 new data series, having all the 8.
So the chart does not adapt dynamically for all the data series that exist at the time of execution, I have always to define the data series one by one.
Do you know a way of dynamically define the data series, so if the query returns n columns, then the chart will display automatically n data series independent of what n number is?
Thanks,
Diogo.

I am setting up a time machine backup to a external Hard drive. I want to backup by Mac book Pro running OSX 10.8.5. I would like to Partition the disk and use one partition for Time machine backups and the other for my Lightroom backups. How to do this?

I want to create a two partition disk. One partition for time machine, the other for Lightroom backup. Currently Time Machine is using the entire drive and it is doing the intial encryption and is about 29% complete after two days. I've decided that I want to turn encryption off and partition the disk. So I do I start over?

With the external drive attached, open Finder>Applications>Utilities>Disk Utility. Select the external drive from the list in the left side panel of the DU window. In the main window panel, click Partition in the buttons top center of that panel.
Select the number of partitions you want and adjust their sizes.
For the first partition, click to highlight the partition, then select the format, Mac OS Extended (Journaled) and then the partition table as GUID [both of those are the defaults]. Click Apply and it will ask to confirm and erase and format that partion...oh, give the partition a name, like Backup.
Then repeat those steps for the second partition..and remember to name it...something like Lightroom.
Close Disk Utilitty and you are ready to send TM to the one partition, and do your backup of Lightroom to the second partition.

Editing colors of Keynote chart data series

I am attempting to edit a Keynote chart (Scatter plot) with 3 data series. I selected the first Chart option which plots the data by color (Blue, red, white). I do not see an option to adjust or change the default colors. In the "Edit Chart Data" dialog, the series colors appear at the column head but there is no apparent way to change the default color. The white data series wouldn't be so bad except that the background of the chart is also white.

A pie chart shows the proportions that make up the total, therefore what your chart actually shows is a $150 transaction with $50 profit.
The definition of profit is: total price less expenses, then the pie chart should show:
Profit in a $100 sale

I want data series in Keynote chart to enter one at a time.

Similar Messages

Maybe you are looking for