Showing data series for two charts on one

Hi
I need to represent 2 sets of data on one chart. The first is a linebar chart and the second is a scatter chart. This can be done in Excel by adding multiple named data series.
Is this possible with crystal report 2008.
Thanks

I'm a bit late to discussion, but this is I think the most relevant post I could find.
I have the same problem - displaying multiple data series on the same chart (line chart or scatter by date).  My problem is complicated by the fact that number of series also depend on the data point.
Essentially I need to plot readout of test in a monitored room where different number of sites maybe tested depending on the room.  So one room might have three data readouts (three sites), and another five (five sites), and when charting by room, one chart will have three series, and another five.  So even considering using overlapping transparent charts, there are issues of conditionally enabling/disabling the whole chart, of determining maximum number of charts (and room might have dozens of test sites) and also displaying appropriate legend(s).
There must be a better way!
TIA,
Andrey.

Similar Messages

  • Add data series to excel chart

    I have an envelope on a chart in Excel.  I would like to add same test data to the chart.  I can open the workbook and get my data on a worksheet, but can't figure out how to add the data series to the chart using ActiveX.

    Here is some vi's that I forgot that I had for excel. In it is one vi in particular called create chart.vi have alook at it. I'm sending you the whole llb. i have not tested them in LV 8 yet.
    hope they help.
    Joe.
    "NOTHING IS EVER EASY"
    Attachments:
    excel.llb ‏2092 KB

  • Printer shows wrong cartidge for my hp allin one

    Printer shows wrong cartidge for my hp allin one printer.It was working 4 /5 days ago?if noone can help me is there a toll free number i canc all hp without having to pay for it,I posred this 4 times now and nobody has helped me,,,,,,,,I have windows vista and a DX series gateway computer about 7 nonths old now...Well i cant do anything with my printer now??????????

    call 1-800-474-6836.

  • I want data series in Keynote chart to enter one at a time.

    In older version of Keynote, data series can enter one at a time. In version 6.2, seems all series enter at once. Can different series be made to enter one at a time in Keynote 6.2?

    Select the chart
    Inspector > Animate > Build IN > Add an Effect
    choose an effect
    in the Delivery drop down menu select;   By Element in Series

  • Report for two sponsors on one project

    I would like to make report for two sponsors: Each of them want to see only a Cash flow (Budgeted Expense Cost and Actual Expense Cost) that is related to him/her.
    It is possible to do something similar in two ways:
    1. Activity Usage Spreadsheet - Spreadsheet Fields - Time interval - Cost - Budgeted Expense Cost and Actual Expense Cost
    2. Activity Usage Profile - Activity Usage Profile Options: Filter by bars/curver (Expenses); Show Bars/Curves (Budgeted and Actual)
    while Timescale: Show primary Dates (Type - Calendar; Date interval - Quarter/Months).
    But in both way Expenses are grouped together and it is not possible to differentiate who is financing what.
    Thanks!

    Yes, we are only replacing image files. So--since no one here
    is familiar with merge-- if we do as you suggest using Windows
    Explorer, the steps will be:
    1) One writer works on his/her computer's local drive and the
    other writer works on his/her computer 's local drive (no shared
    drive).
    2) Each writer creates an Image folder on his/her computer's
    local drive
    3) Each writer captures (Snag-it) images from the
    application, opens the captured image in Photoshop and sizes the
    new image file to match the size and width, border, etc parameters
    of the image in the current Help's HTML code. (writer will have to
    view HTML code to get image size)
    4) Each writer will copy the new image files into his/her
    local drive-based Image folder--giving the new image the same name
    as the image that is being replaced).
    5) The image files in the first writer's Image folder are
    then copied to the Image other writer's Image folder.
    6) The new Image folder containing all the new image files is
    copied into the RoboHelp source directory, overwriting the old
    Image folder.
    7) The writer with the new Image folder (containing all the
    new images) then generates and publishers the RoboHelp project.
    Is this correct?

  • How to include two charts in one web template

    I need to dispaly two charts which are based on same query and on characteristic 1 vs KF's and the other on characteristic 2 vs KF's in one web template.
    How can this be done?
    Thanks in advance,
    Murali.

    When you execute the query in the bex analyzer, perform th enavigation stpes to reach to your desired layout of data. Then from the Save button on the bex toolbar, choose Save > Save View Global. Give it a technical name and  a description. Then log back into the WAD and assign the view as the data provider (Note there are 2 buttons over there: One for query and the other for View)
    Hope this helps...

  • Overlapping of data series in Combo Chart

    Hi All,
    We are working on VC7.0
    I have three data series elements and I would like to display them in a combo chart with two columns and a line .
      ( 1.Actual Gross Turnover - Column
        2. Planned Gross Turnover - Column
        3. Actual Gross Turnover prior Year - Line )
    I tried with different options present there in Configure Element , but the two columns overlap with each other i.e the highest column is overriding the lower column.
    Can someone help me out in this ?
    Thnks,
    NR

    Hi Pasha ,
    yes, i am quite sure that bars are overlapping and checked with the 3 options you have mentioned.
    3. I have tried streching the graph horizontally but still the same display.
    2. I did moved to mouse to the edge points of bar .. it only mentioned one data series instead of two
    1. See if the db column contains NON-ZERO values ? ..
    I am not sure of it but when deploying the model in VC , i got a warning message saying " Zero fill is checked without Max length in field "Gross Turnover Actual " of entity " query name "
    Let me know, how this efffects the display and what do i need to do to resolve the issue .
    Appreciate your valuable inputs ...
    Thnks,
    NR

  • HT4436 How do I set up separate iCloud's and apple ids for two phones on one account?

    I just got a new iPhone and when they transferred my contacts at the store they also replaced my husbands contacts on his phone! Major mess...how do I get the two phones on separate clouds??

    To fix this, you need to migrate your data to a separate iCloud account.  Do not delete any data from either phone until this is done or it will also be deleted from iCloud and the other phone, and will be lost.
    When you do this any data you sync with the shared iCloud account such as contacts is merged and will appear on all devices connected to the account.  To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores). 
    Decide which iPhone will be keeping the current iCloud account.  On the one that will be changing accounts, if you have any photos in your photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.  If you are syncing Notes with iCloud (Settings>iCloud>Notes>On), you will also need to email these to yourself in order to keep them.
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (i.e., deleting your husband's data from your account, and vice versa).

  • How to provide different plor series for plot chart

    How to provide different plot series for a Plot Chart.
    The IDs of the series are given in a ComboBox control

    Series are stored in an array. If there is only one series, then you can change it simply by "pushing" a series into a new array, and then assigning that series array to the chart. If you are replacing one series in the chart series array, then you have to figure out which to remove and put the new one in.
    This LiveDocs link may help:
    http://livedocs.adobe.com/flex/3/html/help.html?content=charts_intro_7.html
    If this post answers your question or helps, please mark it as such.

  • How to configurate system for two database under one server

    Hi Friends,
    I installed abd created A database by oracle 10GR4 in window 32 bit 2003.
    it works.
    Then i created other B database by DBCA under this server.
    When I shutdown immediate database.
    it works well. But I can not startup mount ot startup A database again,
    I got below message as
    SQL> startup mount;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    SQL> startup;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    SQL> startup;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    From EM, I saw as
    A listen Status Up
    LISTENER
    Oracle Home          
    C:\oracle\product\10.2.0\db_1\BIN
    Location          
    C:\oracle\product\10.2.0\db_1\BIN\network\admin
    BUT agent connect Status          
    Failed
    Details          ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
    A database instance down
    Host     salerpt.net
    Port 1521
    SID SALERPT
    Oracle Home C:\oracle\product\10.2.0\db_1\BIN
    Also I try to connect as
    SQL> connect sys/salel@salerpt as sysdba;
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor
    Form EM, I saw listen start up.
    Then I stop it. then restart it
    I can saw B db listen and can not see A db listen.
    also
    I saw that other B database works.
    My listen info as***************
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1\BIN)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = SALERPT.NET)(PORT = 1521))
    I check physical, two database use one common bin directory .
    I do not have any experience to handle two database under one oracle server.
    How to check and configurate DB server system?
    Thanks for help.
    Edited by: user589812 on Jan 4, 2009 8:17 AM

    Jim,
    Before starting the database A, did you set ORACLE_SID=A from command line? You can run as many instances you want from single server provided you enough memory, processing power. Also try starting your instances usign window services and check and post some lines from alert.log for database A.
    tnsnames.ora entry
    DATABASE_A =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = salesrpt.net)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = DATABASE_A)
    DATABASE_B =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = salesrpt.net)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = DATABASE_B)
      )Regards
    Edited by: OrionNet on Jan 5, 2009 10:55 AM

  • Is it possible to use same data source for two info cube

    Hi,
    My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
    Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
    Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
    "0IC_C03".
    Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
    and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
    Pls. help.
    Regards,
    viren.

    Hi,
    You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
    In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
    Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
    Cheers,
    Kedar

  • Add a data series dynamically in charts

    I am trying to add a data series dynamically in a chart but
    it does not seems to work. Here is the sample code. Any idea?
    var line1:LineSeries=new LineSeries();
    line1.dataProvider=[something];
    line1.displayName="New data";
    chart.secondSeries.push(line1);
    It works if I do the following but I don't want to remove
    other series already there.
    var arr = new Array();
    chart.secondSeries=arr;
    var line1:LineSeries=new LineSeries();
    line1.dataProvider=[something];
    line1.displayName="New data";
    arr.push(line1);

    I see...i don't know why the chart is not refreshing itself
    in the next keyframe after you added another series. You can also
    try to put the statement:
    [myChart.series[(myChart.series as Array).length] = your new
    ColumnSeries object goes here.]
    in a new frame by doing doLater();
    Apparently an asigninment statement on the series array does
    the trick. If you don't like that approach, you can also try to
    invalidate the display object, so that a refresh is forced.
    -george

  • How to display no data found for two different elements

    i wanted to display report either by dept wise or supplier wise
    so when I dont have deptno related data
    It should say no data found
    for that I'm using if condition
    same for supplier too
    instead of giving twice can I give it in the same if condition
    if so how

    Use logical operator 'or'
    like <?if:not(DEPT_GRP) or not(SUPPLIER_GRP)?>No data Found<?end if?>

  • Show name field for two columns Fact Table joing by one Dimension

    Hi all,
    My question is about physical joins in Oracle BI EE.
    Task is:
    In a relational fact table "star" there is two columns Entity 1, Entity 2 and a table dimension Entity witch have two filds: ID and NAME. By loadind data fact table is filled with id for Entity 1 and Entity 2.
    In a report made in Answers i need to show ID_Entity_1 NAME_Entity_1 ID_Entity_2 NAME_Entity_2
    Question is: how to do physical join between two columns fact table and one dimension table entity so, that i can show name field in a report for both columns Entity 1, Entity 2.

    You must Create an alias in the physical layer of your table dimEnsion and use it as a second dimension table.

  • How can I change the bar color (data series) in a chart on the iPad version?

    The number of different. colors used in a char (line, bar, pie, ...)  appears to be limited to six, quite short for my needs, however, Excel imported charts show up in the original colors (12)...  until I change the chart type (to get a homogenous look with the rest of the content) it gets changed to the 6 basic colors. Any clue on how to modify individual series colors? Note that I am asking about the iOS version.
    Thnx

    Does any one know how you can adjust the font size (point size) for the file
    names.
    Sadly enough you can't chance that, feel free to add a feature request for
    that, the more there ask for the bigger chance it will be realized.
    It would be great if the colors for the image name (background and font color)
    could be changed so the contrast could also be increased so it is also easier
    to read.
    And this the cheerful part, go to Bridge preferences General tap and play
    with the sliders for user interface and Image Backdrop until your satisfied.
    BTW using the slider for thumbnail size bottom right of the Bridge window to
    increase the thumbs does not increase the font but makes it nevertheless a
    little clearer.

Maybe you are looking for