I want my Test Sockets will run in loop

I want my Test Sockets will run in loop. I use BatchModel, sequential batch mode.
Now it works so:
process setup
main sequence of Socket 1...
main sequence of Socket 2...
main sequence of Socket N...
process cleanup
I want to do so:
process setup
loop 1
main sequence of Socket 1...
main sequence of Socket 2...
main sequence of Socket N...
loop 2
main sequence of Socket 1...
main sequence of Socket 2...
main sequence of Socket N...
loop N
main sequence of Socket 1...
main sequence of Socket 2...
main sequence of Socket N...
process cleanup
How can I do it ?

Marta,
Try using the PreUUTLoop and PostUUTLoop callbacks instead of ProcessSetup and ProcessCleanup.
Allen P.
NI

Similar Messages

Get individual test socket execution reference

Hi All,
Versions used: LV 2014, TS 2014, Parallel model with each DUT independently tested, Custom OI built as per need
I have an application where at most 8 test sockets can run at a time, independent of each other. Each DUT must be independently started, paused or aborted from LabVIEW custom OI. How do I get the individual test socket execution reference so that I can send the pause/abort command from LabVIEW Operator Interface? I tried using the FileGlobals.TestSocketExecutions array from the Parallel model (by setting "Shared at Run-time" flag), but these references seems to be changing constantly.
What I want to do is have a unique execution reference for each testsocket that can be obtained when the DUT is started/ even when the testsocket is spawned, store that reference in my LabVIEW code and use this execution reference when I want to pause/abort the testing in that particular socket from LabVIEW OI.
Thanks in advance,
Saranya

Saranya,
I assume (hope) that you are using the "Test UUTs" execution entry point in the parallel model. So it seems to me that you already disabled the "UUT Info Dialog", otherwise you would have blocking functionality which requires user interaction on the UI dialog.
Please look into the Parallel Model as well as the modelsupport2.dll sources (available as CVI project in TS model folder) how the synchronization is done there.
Hint: There is a queue....
Also, i hope that you mixed abort with termination. I highly recommend you to never abort executions.
Norbert

Running Unit Test from test manager that run bat file from command line

Hi ,
I am trying to run Jsystem (java framewotk) from command line using runScenario.bat thru unit test that i associated to test in test manager.
the idea is that when i ran the automated test from MTM - it will run the the unit test that will run the appropriate test case in java.
i wrote the code like this :
using System;
using Microsoft.VisualStudio.TestTools.UnitTesting;
namespace UnitTestProject3
[TestClass]
public class UnitTest1
[TestMethod]
public void TestMethod1()
try
String command = "c:\\JSYSTEM\\runner\\runScenario.bat
c:\\Users\\ryeshua\\Source\\Workspaces\\Auto1\\my-tests-project\\target\\classes scenarios\\feature1 RoeySetup.xml ";
System.Diagnostics.ProcessStartInfo procStartInfo =
new System.Diagnostics.ProcessStartInfo("cmd", "/c " + command);
procStartInfo.RedirectStandardOutput = true;
procStartInfo.UseShellExecute = false;
//procStartInfo.CreateNoWindow = true;
System.Diagnostics.Process proc = new System.Diagnostics.Process();
proc.StartInfo = procStartInfo;
proc.Start();
string result = proc.StandardOutput.ReadToEnd();
Console.WriteLine(result);
catch (Exception objException)
// Log the exception
and when i ran it from visual studio it worked perfect. and update the Jsystem logs of the junit test in the jsystem/runner/log folder.
but when i added it to associated test and ran it from MTM - it pass but it does not update the logs in jsystem folder.
the problem that i dont know what is not working. i cant see the output of it when i ran from mtm but can see when i ran from VS.
i am using VS 2013 Pro with MTM 2013.
please advice
Roey

Hi Roey,
Thank you for posting in MSDN forum.
Based on your issue, could you please tell me how you generate the log file under the jsystem folder?
Generally, I know that when we run unit test from VS IDE, the file will be saved into the local machine. But when we run unit test from MTM, the unit test method will be run on the test agent machine, so the file will be saved into the test agent machine.
Therefore, I suggest you could check if you did not see the updated logs file in jsystem folder on the test agent machine.
In addition, I suggest you could try to copy this unit test project on this test agent machine and then run the unit test method using mstest.exe in command line and then check if you can update the logs file.
https://msdn.microsoft.com/en-us/library/ms182489.aspx?f=255&MSPPError=-2147217396
If you have any updated message about this issue, please tell me.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Sync drop even in test socket.

Currently in my 10 day waiting period having just signed up to BT, but unplugged the hub a few times to experiment with the orange wire and combinations of that and the i plate. My sync has dropped at the test socket from 1856 to 1216. Is this something that I have done, or am I right in thinking that the sync speed on the test socket will not change unless its a problem at the exchange?
Thanks in advance.
Dave

You could do a quiet line test by
dial 17070 option 2 and listen - should hear nothing
preferably with an analogue phone a digi one may have slight hiss otherwise silence
but only if it dont improve
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

How to change Number of test socket in Model option during run-time

I wanna be able to change the the number of test sockets(in the Model Options menu) during runtime. I have overriden the Prebatch callback and used my own instead. I have a LabView program in my Prebatch where I would select the test script each time before running the batch. I wann be able to also modify the number of test sockets each time before I run the batch again. I tried setting the "Parameters.ModelData.ModelOptions.NumTestSockets" from the Labview program which is in my Prebatch before running each batch, but get into errors. Please help?

Hello Kumar,
The Batch process model shipped with TestStand does not handle this scenario, but you can still do this. Attached is a sequence file that utilizes the Batch Model's ProcessCleanup callback to reset the next execution point. It still uses the method of setting the Parameters.ModelOptions.NumTestSockets variable in the PreBatch callback. The change I added was three steps to a different callback (the ProcessCleanup callback):
Message Popup - prompts Yes or No to continue testing with a new batch size.
Statement 1 - based on the response to the message popup (via precondition), resets the Batch Model's next step to be executed and the ContinueTesting flag:
RunState.Root.RunState.StepGroup = "Setup"
RunState.Root.RunState.NextStepIndex = 0
RunState.Root.Locals.ModelData.ContinueTesting = True
Statement 2 - based on the response to the message popup (via precondition), loops to reset each TestSocket's ContinueTesting flag:
RunState.Root.Locals.ModelData.TestSockets[RunState.LoopIndex].ContinueTesting = True
These two statement steps force the next step to be executed in the Batch Process Model to be the first step in the "Setup" step group, and reset all necessary flags for the batch itself and the individual TestSockets. I discovered the flags that had to be reset by trial-and-error (that was the time-consuming part).
You can run continuous batches of the same size you first chose (for as long as you like), but when stop the batch execution this new message popup will prompt (yes/no) whether you want to continue testing with a new batch size. If no, then processing terminates. If yes, then the next two statement steps are run and execution resumes back at the beginning of the Batch Process Model's Setup step group. This forces the ModelOptions callback to be executed again, so your VI (in my example here it's just a Message Popop) can then set NumTestSockets appropriately.
Thanks for contacting National Instruments!
David Mc.
NI Applications Engineering
Attachments:
kumar.seq ‏27 KB

HT4759 I want to use icloud mail on both iPhone 4s AND my pc. icloud mail on PC is mega glitchy and frustrating because my PC is ancient, I run XP, & these DO NOT MEET req's for iCloud. Is there a email platform that will run well on both XP and iPhone?

I NEED to use icloud mail on both iPhone 4s AND my PC. I need to use both.
Trying to use icloud mail on PC is mega glitchy (STOP SCRIPT WARNINGS EVERY FEW MINUTES) and frustrating because:
1. my PC is ancient (but nicely refurbished/fast)
2. I run XP (with both Firefox and Chrome- newest versions)
3. thusly, I DO NOT MEET SYSTEM REQUIREMENTS for iCloud.
In my passed attempts I found that
1. Yahoo doesn't work well on iPhone
2. Gmail doesnt work well on iPhone.
I must be missing something... an app or... maybe a donated/ NEW FREE MAC! (That would be sweet! Ha.)
Is there an email platform that will run well on both XP and iPhone?
or... Please say it isn't true: I would love a Mac tablet or desktop. We have no money for a mac. SOL? Is this iCloud apple tech only for wealthy middle class and above who can afford to have the newest and best of everything?

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?

I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Sudden Motion Sensor:
State:          Enabled

Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)

I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

The only way that would work out is if you ran exactly the versions that were made for old PowerBooks. Anything newer may require Intel and not run, or will strain the poor old G4 CPU.
Your needs have to be modest, too, because the problem with older music and video software is that they are not current as far as formats and codecs for the Web. If you want to output H.264, the current standard for YouTube/Flash video, older software may not support it, and in addition, H.264 is processor-intensive and is tailor-made for today's multi-core, 2+ GHz processors. It will overwhelm a G4. A PowerBook G4 can barely play YouTube videos.
More perspective: The PowerBooks worked great for miniDV format editing. In other words, 480i SD/standard definition video in use from the late 1990s to the late 2000s. If that is all you want to do, edit tape from an old miniDV camera to SD output, then OK.
But if you want to edit today's HD video, whether 720p from a snapshot camera/iPhone 4 or 1080p from a DSLR, the PowerBook and the software for it will either not recognize AVCHD/H.264, or it will slow the PowerBook to a dead crawl.
I'm in agreement with the above: Intel Macs have been out for so many years that getting a used one is a much better deal than a dead-end PowerBook. And I loved (still love) my PowerBooks.

I have an eMac that shipped with 10.4 and want to set it up so that it will run in Classic mode?

I have an eMac that shipped with 10.4 and want to set it up so that it will run in Classic mode? However, when I launch System Restore it asks me to load the disc marked with teh sinfgle dot but then doesn't seem to run it?

Follow up. I went to the site at the link I refered to and downloaded the recomended
"NetBoot for Mac OS 9." http://support.apple.com/kb/DL1192
The netbook9.dmg needs to be mounted on a PPC Mac as it would not open on a the intel Mac I used for downloading. (Reason - legacy image should be converted.) I copied to a G4 iBook and mounted it then saved the english folder conaining the NetBook.pkg. From there follow the attached picture using Pacifist to extract the NetBook HD folder which contains an OS 9.2.2 System folder.

I want to buy a refurbished Macbook Pro solely to use 'protools 8' on-nothing else. I am being told there are only certain year Macbooks Pro that will run this programme. I know I need 8gb, can anyone give me advice on what to buy/look for?

I want to buy a refurbished 'Macbook Pro' solely to use 'protools 8' on-nothing else!.
I am being told there are only certain year Macbook Pro that will run this programme.
I know I need 8gb, can anyone give me advice on what to buy/look for please?

It appears to depend upon the version you will be using:
http://avid.force.com/pkb/articles/en_US/Compatibility/en352429
Based on what I can tell, you may have to go to the second hand market in order to get a MBP that will run a compatible OSX.
Ciao.

Want to buy the new MacBook Air 13in i5 processor, but I have to know if this will run RuneScape on high quality SMOOTHLY. Thank you

Want to buy the new MacBook Air 13in i5 processor, but I have to know if this will run RuneScape on high quality SMOOTHLY. Thank you

I can say World of Warcraft runs smooth.

IF I RUN A EDITING WITH PREMIERE ELEMENTS TEST VERSION, WILL BE POSSIBLE TO SAVE THE WORK WITHOUT THE MARK AFTER THAT I BUY THE LICENCE? THANKS

IF I RUN A EDITING WITH PREMIERE ELEMENTS TEST VERSION, WILL BE POSSIBLE TO SAVE THE WORK WITHOUT THE MARK AFTER THAT I BUY THE LICENCE? THANKS

NUNU
Media cache files are not involved in the removal of the Adobe watermark from the project.prel file from a tryout.
Just a re-enforcement mention...you cannot remove the Adobe watermark from a tryout "saved" exported product; whereas, you can from a saved/closed project file (project.prel).
By exported product, I mean a burn to disc in the tryout or the Timeline of the tryout exported to a file saved to the computer hard drive.
In the case of removing the Adobe watermark from the tryout project.prel, classically you delete the rendered files (Timeline Menu/Delete Rendered Files) in the purchased program. In no way is media cache involved in this. Some of us have found that there was an automatic removal of the Adobe watermark resulting from just opening the tryout project.prel file in the purchased program.
Please review and consider.
Thank you.
ATR

Sharing a communication object between test sockets

Hi everyone, I am having some trouble using teststand in batch mode as it is my first time doing so. Here is my question:
I am creating a test sequence that uses multiple test sockets. I am using a switching matrix that is controlled over ethernet to allow me to connect different loads to the hardware under test. I only have one load, but I have several different devices that need to connect to that load for the tests to be run, and they can only be connected one at a time.
My approach was to initilaze the connection to the switching matrix and store the resulting object reference as a global variable, which allows me to send commands to the switch matrix from any sub-sequence. I then created another sub sequence for the load tests called "External Load Tests". In this step, the load is connected to the hardware via the switching matrix, and tests are run. I am using batch mode, so I put a lock on the "External Load Tests" sub sequence so that only one thread can enter at a time.
This sequence works if there is only one active test socket. If there is more that one, the first thread will get inside the external "External Load Tests" step and try to send a command to the switch matrix using the object reference that I mentioned. However, when this happens, the step hangs indefinitely until the other threads are manually stopped. It seams like the thread isnt being given access to the switch matrix object, becuase usually if there is an error the switch matrix driver throws an exception, but in this case it just hangs.
Any ideas on how I can fix this? I don't have a lot of experience with multi threading, so any advice would be greatly appreciated.
Thanks!

For the batch model you could use a serialized batch synchronization section rather than a lock. A lock should also work though, it just doesn't guarantee that all threads get to the section before any of them continue and doesn't guarantee the order like batch synchronization does. Typically you should use all default settings for the batch model (other than perhaps number of sockets). Which setting did you change? The 'Default Batch Synchronization' setting? You should typically leave this as "Don't Synchronize". Setting this to Parallel makes it synchronize at every step which requires all sockets to get to each step before any of them to continue. This is not the behavior that people typically want. In most cases you should use the default of "Don't Synchronize" and then set synchronization manually in your sequence where you want it, either using the step synchronization settings, or the batch synchronization step types, or other synchronization step types such as locks.
Hope this helps,
-Doug

Kisight: FAQ 1: Want to Test your iSight With Another Person? (replacement)

Original
kisight: FAQ 1: Want to Test your iSight With Another Person?
Suitable for iChat 2.x and iChat 3
This FAQ follows on from EZ Jim's "How To Ensure Your iSight Is Functional"
Testing with Another User
This FAQ presumes you have done the preliminary tests in EZ Jim's FAQ and can see yourself in the Preview windows of iChat.
If your iSight works and you want to test your ability to connect iChat AV for instant messaging, see the iChat AV FAQs for further help.
Apple runs three AIM names:-
appleu3test01,
appleu3test02 and
appleu3test03 are available as Autoresponders. (They answer your call and start to show Video (adverts).
They will accept invites from iChat 2.x, iChat 3, the AIM application on a PC and Trillian also on a PC.
See Table 1 here for clarity
In Addition to these there are several people who post regularly in the iChat and iSight discussion areas who may offer their help. See the list below.
Other people put their details in their Apple profiles which you can see by clicking on their name on the left of any post.
Please be aware of Time Zone differences.
Current Known test users (Be polite and Text a request first).
Rather than post iChat names on a page that could possibly be trawled for info, I linked the list to peoples profiles.
Ralph Johns (UK) See under "Biography" in new Discussions Profile. Using Tiger (iChat 3 Panther at 10.3.9 possible still) Can also host 4 ways
EZ Jim By invite on the Boards only
Defcom (UK) From New Disussion Profile. Using Tiger (iChat 3)
Ryan Mathus New DIscussion Profile. Maryland.
ChrisBel New Discussions. Please note the @mac reference (Paris).
James A. Weston New Discussions Profile. California (Please Text first. Has PCs and Macs. Mac on Tiger and an Intel Mac.
Jeremy Varner Pennsylvania On Tiger
John Holt In Austailia.
See More about their Whereabouts and abilities to test here in Table 2
The people who have offered to be testers have put their iChat details in their profiles.
The Links are to prevent Trawling.
From there you can copy and paste them into the Add Buddy set up screens to put them in your Buddy list. Please note you need to select the correct account type when adding a Buddy.
To start a chat can be done in four ways.
1) Double click the green camera icon next to the person's name in your Buddy list
2) Click the person's name once in the Buddy list and use the icon at the bottom of the Buddy List
3) Click the person's name once and use the Buddies menu items.
4) Right Click on a Buddy and use the Pop Up Menu.
3:54 PM Friday; March 30, 2007

Original
kisight: FAQ 1: Want to Test your iSight With Another Person?
Suitable for iChat 2.x and iChat 3
This FAQ follows on from EZ Jim's "How To Ensure Your iSight Is Functional"
Testing with Another User
This FAQ presumes you have done the preliminary tests in EZ Jim's FAQ and can see yourself in the Preview windows of iChat.
If your iSight works and you want to test your ability to connect iChat AV for instant messaging, see the iChat AV FAQs for further help.
Apple runs three AIM names:-
appleu3test01,
appleu3test02 and
appleu3test03 are available as Autoresponders. (They answer your call and start to show Video (adverts).
They will accept invites from iChat 2.x, iChat 3, the AIM application on a PC and Trillian also on a PC.
See Table 1 here for clarity
In Addition to these there are several people who post regularly in the iChat and iSight discussion areas who may offer their help. See the list below.
Other people put their details in their Apple profiles which you can see by clicking on their name on the left of any post.
Please be aware of Time Zone differences.
Current Known test users (Be polite and Text a request first).
Rather than post iChat names on a page that could possibly be trawled for info, I linked the list to peoples profiles.
Ralph Johns (UK) See under "Biography" in new Discussions Profile. Using Tiger (iChat 3 Panther at 10.3.9 possible still) Can also host 4 ways
EZ Jim By invite on the Boards only
Defcom (UK) From New Disussion Profile. Using Tiger (iChat 3)
Ryan Mathus New DIscussion Profile. Maryland.
ChrisBel New Discussions. Please note the @mac reference (Paris).
James A. Weston New Discussions Profile. California (Please Text first. Has PCs and Macs. Mac on Tiger and an Intel Mac.
Jeremy Varner Pennsylvania On Tiger
John Holt In Austailia.
See More about their Whereabouts and abilities to test here in Table 2
The people who have offered to be testers have put their iChat details in their profiles.
The Links are to prevent Trawling.
From there you can copy and paste them into the Add Buddy set up screens to put them in your Buddy list. Please note you need to select the correct account type when adding a Buddy.
To start a chat can be done in four ways.
1) Double click the green camera icon next to the person's name in your Buddy list
2) Click the person's name once in the Buddy list and use the icon at the bottom of the Buddy List
3) Click the person's name once and use the Buddies menu items.
4) Right Click on a Buddy and use the Pop Up Menu.
5:13 PM Thursday; April 5, 2007

Disable a test socket during execution (Batch Mode)

We are running a Batch Model with Batch Synchronization. I am wondering if it is at all possible to totally disable one or more of the test socket during execution. I know that the opening screen allows you to choose which sockets are active, but in the event that something goes astray like the RS-485 communication is non-responsive, I would like to disable one or more at anytime during the test. Thank you in advance for any ideas you come up with.
Regards
Scott
Environment: TestStand 2010
Solved!
Go to Solution.

I am not aware of how to stop a socket which is already running and facing an error midway.
But this setting will ensure that the socket is disabled for the next runs.
1) Override the preBatch callback.
2) Call this statement in the current executing thread to stop the socket from next run. ( precondition = on error)
RunState.Caller.Parameters.ModelData.TestSockets[RunState.TestSockets.MyIndex].Disabled=True

I want my Test Sockets will run in loop

Similar Messages

Maybe you are looking for