I want to add new mac to existing wired and wireless network

I have a imac 400mz connected (ethernet) to a network - CABLE Modem to Balkin 5.4 G Wire/Wireless router. I have 2 wintel machines hard wired, plus 1 via Motorola PCIMA wireless. I want to add either of the following new Apple products -
mini mac or imac 17 - both have Airport extereme installed. OK how do I get the new apple on to the existing network.
Please advise

On the Mac - click on the Airport menu icon located near the right side of the MacOS menu bar at the top of the screen. A list of all in-range wireless networks will appear. Click on the name of your wireless network to connnect to it. If your wireless network is protected by WEP or WPA security, the Mac will prompt you to enter the key. That's it!

Similar Messages

My ipod shuffle cannot hold any other music. i have meditations on there and wanted to add new music. i 'restored' it and now can't remember how i initially set it up. can you help?

i tried to erase my ipod shuffle. i clicked 'restore' and was asked questions that i have no answers for. i don't recall getting a 'disk' when i bought this. can you please help?

➡ https://iforgot.apple.com/

I boughtThe new iPad three week ago and I want to change it for a 32 gb and wireless / network is this possible

I bought an iPad three weeks ago and I will like to know if I can exchange it for the 32gb and the wireless and network

KP is right, Apple has a 30-day return for refund policy, but since you are beyond that time your best option may be to sell on eBay or Craigslist, or such, and put the money towards the one you want. Apple is very generous about returns during the first two weeks but they then cut it off.

How to add new infoobject to existing cube or dso?

Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
Sunil

Hi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM

Add new Column to existing Primary Key

Hi,
I have a Primary key consisting of 6 columns. Now i want to add new 7th column to that existing key.
Do i need to drop the existing primary key and then recreate agian with 7th field or is there any other way?
Regards,
Jayesh

I think what Joel was really saying is that dropping/recreating a PK is the only way to change the PK column list in version 6 - 9. Who knows about in 10g? Though I doubt that this has changed.
If the table only has one or two more columns that are not part of the key you might consider converting the table to being an IOT (indexed organized table).
HTH -- Mark D Powell --

Maintenance view: add new entry under existing ones

Hi,
I would like to add a new entry in a maintenance view, but keeping the existing entries visible. That is, I want a new line to appear under the older ones, so I can see them, instead of opening a whole new screen with empty lines.
Thanks in advance,
Ivson

If you want to add new field in the view.
Goto SE54 and carry out the following steps:-
1) Enter the name of the table or view.
2) Choose Generated objects.
3) Choose Create/Change. You go to the generated objects maintenance screen.
4) Choose Change. A screen of reasons for changes appears.
Select option(s) and choose Continue.
The new field will appear in the view.

Add new depreciation to existing assets

hi experts
can we add new depreciation to existing assets , while creating new assets i can see the depreciation that i have created recently. but for the existing assets i want to add this new depreciation.
venkat

Hi
Yes u can change the depreication
but keep in mind note the date when u chnage the depreciation of existing asset
and check any invoice not pending of asset PO at the time of change the depreciation
Suppose u create a PO with asset, whc\ich is creatd ( suppose machinary rate is 10%)
then u comlete the cycle first this means invoce entry ( MIRO)
then u chnage the depreciation
if any query revert back
Regards
Roobal

I want to add new field to this list

hi all,
i want to add new field to this list.
kostenstelle from table zfmkstel
*& Report ZFM_MOBLIST                                                 *
REPORT ZFM_MOBLIST.
TABLES: zfm_handy , pa0002.
TYPE-POOLS : slis.
DATA: g_repid LIKE sy-repid,
      gs_print            TYPE slis_print_alv,
      gt_list_top_of_page TYPE slis_t_listheader,
      gt_list_end_of_page TYPE slis_t_listheader,
      gt_events           TYPE slis_t_event,
      gt_sort             TYPE slis_t_sortinfo_alv,
      gs_layout           TYPE slis_layout_alv,
      gt_fieldcat         TYPE slis_t_fieldcat_alv,
      fieldcat_ln LIKE LINE OF gt_fieldcat,
      col_pos TYPE i.
*DATA : BEGIN OF it_moblist OCCURS 0.
       INCLUDE STRUCTURE zfm_handy.
*DATA : nachn TYPE pa0002-nachn,
       vorna TYPE pa0002-vorna,
     END OF it_moblist.
DATA : BEGIN OF IT_MOBLIST OCCURS 0,
       TELNUM TYPE ZFM_HANDY-TELNUM,
       KARTNR TYPE ZFM_HANDY-KARTNR,
       ZUTART TYPE ZFM_HANDY-ZUTART,
       PERNR TYPE ZFM_HANDY-PERNR,
       nachn TYPE pa0002-nachn,
       VORNA TYPE pa0002-vorna,
       ZDATE TYPE ZFM_HANDY-ZDATE,
       PINNR TYPE ZFM_HANDY-PINNR,
       PUKNR TYPE ZFM_HANDY-PUKNR,
       TARIF1 TYPE ZFM_HANDY-TARIF1,
       TARIF2 TYPE ZFM_HANDY-TARIF2,
       TARIF3 TYPE ZFM_HANDY-TARIF3,
       GTYPE TYPE ZFM_HANDY-GTYPE,
       IMEI TYPE ZFM_HANDY-TARIF1,
        twincard type zfm_handy-twincard,
        twinbill type zfm_handy-twinbill,
        einbau type zfm_handy-einbau,
        beschr type zfm_handy-beschr,
        text1 type zfm_handy-text1,
         text2 type zfm_handy-text2,
          text3 type zfm_handy-text3,
          end of it_moblist.
DATA : BEGIN OF IT_zfm_handy OCCURS 0,
     TELNUM TYPE ZFM_HANDY-TELNUM,
     KARTNR TYPE ZFM_HANDY-KARTNR,
     ZUTART TYPE ZFM_HANDY-ZUTART,
     PERNR TYPE ZFM_HANDY-PERNR,
     ZDATE TYPE ZFM_HANDY-ZDATE,
     PINNR TYPE ZFM_HANDY-PINNR,
     PUKNR TYPE ZFM_HANDY-PUKNR,
     TARIF1 TYPE ZFM_HANDY-TARIF1,
     TARIF2 TYPE ZFM_HANDY-TARIF2,
     TARIF3 TYPE ZFM_HANDY-TARIF3,
     GTYPE TYPE ZFM_HANDY-GTYPE,
     IMEI TYPE ZFM_HANDY-TARIF1,
      twincard type zfm_handy-twincard,
      twinbill type zfm_handy-twinbill,
      einbau type zfm_handy-einbau,
      beschr type zfm_handy-beschr,
      text1 type zfm_handy-text1,
       text2 type zfm_handy-text2,
        text3 type zfm_handy-text3,
        end of it_zfm_handy.
*DATA : BEGIN OF it_zfm_handy OCCURS 0.
       INCLUDE STRUCTURE zfm_handy.
*DATA END OF it_zfm_handy.
DATA : BEGIN OF it_pa0002 OCCURS 0,
        pernr TYPE pa0002-pernr,
        nachn   TYPE pa0002-nachn,
       vorna     TYPE pa0002-vorna,
       pernr TYPE pa0002-pernr,
       END OF it_pa0002.
INITIALIZATION.
g_repid = sy-repid.
PERFORM print_build USING gs_print.      "Print PARAMETERS
START-OF-SELECTION.
PERFORM data_selection.
PERFORM build_fieldcat.
PERFORM eventtab_build CHANGING gt_events.
PERFORM comment_build CHANGING gt_list_top_of_page.
PERFORM call_alv.
*&      Form TOP_OF_PAGE
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = gt_list_top_of_page.
WRITE: sy-datum, 'Page No', sy-pagno RIGHT-JUSTIFIED.
ENDFORM.                    "TOP_OF_PAGE
*&      Form END_OF_PAGE
FORM end_of_page.
WRITE: /.
WRITE AT (sy-linsz) sy-pagno CENTERED.
ENDFORM.                    "END_OF_PAGE
### PRINT SETTINGS
FORM print_build USING ls_print TYPE slis_print_alv.
ls_print-print              = ' '. "PRINT IMMEDIATE
ls_print-no_print_selinfos = 'X'. "NO SELECTION INFO
ls_print-no_coverpage       = ' '. "NO COVER PAGE
ls_print-no_new_page        = ' '. "NO NEW PAGE
ls_print-no_print_listinfos = 'X'. "NO PRINT LIST INFO
ls_print-reserve_lines      = 2.   " FOOTERLINE
ENDFORM.                    "PRINT_BUILD
*&      Form data_selection
      text
--> p1        text
<-- p2        text
FORM data_selection .
data : n(8) type n.
SELECT * FROM
             zfm_handy
       INTO CORRESPONDING FIELDS OF TABLE it_zfm_handy where pernr ne space.
IF NOT it_zfm_handy[] IS INITIAL.
    loop at it_zfm_handy.
      n = it_zfm_handy-pernr.
      it_zfm_handy-pernr = n.
      modify it_zfm_handy.
    endloop.
    SELECT pernr nachn
           vorna
     FROM pa0002
     INTO TABLE it_pa0002
     FOR ALL ENTRIES IN it_zfm_handy
     WHERE pernr = it_zfm_handy-pernr and endda = '99991231'.
   SELECT pernr nachn
          vorna
    FROM pa0002
    INTO TABLE it_pa0002
    FOR ALL ENTRIES IN it_zfm_handy
    WHERE pernr = it_zfm_handy-pernr and begda le sy-datum and endda ge sy-datum.
ENDIF.                              " not it_zfm_handy
LOOP AT it_zfm_handy.
    MOVE-CORRESPONDING it_zfm_handy TO it_moblist.
    clear it_pa0002.
    READ TABLE it_pa0002 WITH KEY pernr = it_zfm_handy-pernr.
    if sy-subrc = 0.
      move it_pa0002-nachn to it_moblist-nachn.
      move it_pa0002-vorna to it_moblist-vorna.
      move it_pa0002-pernr to it_moblist-pernr.
    ENDIF.
    APPEND it_moblist.
    CLEAR   it_moblist.
*endif.
ENDLOOP.
ENDFORM.                    " data_selection
*&      Form BUILD
      text
--> p1        text
<-- p2        text
FORM build_fieldcat .
Explain Field Description to ALV
DATA: fieldcat_in TYPE slis_fieldcat_alv.
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'TELNUM'.
fieldcat_ln-tabname   = 'IT_MOBLIST'.
fieldcat_ln-no_out    = ' '.
fieldcat_ln-seltext_l = 'TELNUM'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'KARTNR'.
fieldcat_ln-tabname   = 'IT_MOBLIST'.
fieldcat_ln-no_out    = ' '.
fieldcat_ln-seltext_l = 'KARTNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'ZUTART'.
fieldcat_ln-tabname   = 'IT_MOBLIST'.
fieldcat_ln-no_out    = ' '.
fieldcat_ln-seltext_l = 'ZUTART'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'PERNR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'PERNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'NACHN'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'NACHN'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'VORNA'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'VORNA'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'ZDATE'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'ZDATE'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'PINNR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'PINNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'PUKNR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'PUKNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TARIF1'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TARIF1'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TARIF2'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TARIF2'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TARIF3'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TARIF3'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'GTYPE'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'GTYPE'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'IMEI'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'IMEI'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TWINCARD'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TWINCARD'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TWINBILL'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TWINBILL'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'EINBAU'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'EINBAU'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'BESCHR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'BESCHR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TEXT1'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TEXT1'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TEXT2'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TEXT2'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TEXT3'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TEXT3'.
APPEND fieldcat_ln TO gt_fieldcat.
DATA SORTING
DATA: gs_sort TYPE slis_sortinfo_alv.
CLEAR gs_sort.
gs_sort-fieldname = 'TELNUM'.
gs_sort-spos      = 1.
gs_sort-up        = 'X'.
GS_SORT-SUBTOT    = 'X'.
APPEND gs_sort TO gt_sort.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'KARTNR'.
GS_SORT-SPOS      = 2.
GS_SORT-UP        = 'X'.
*GS_SORT-SUBTOT    = 'X'.
APPEND gs_sort TO gt_sort.
ENDFORM.                    " BUILD
*&      Form EVENTTAB_BUILD
      text
     <--P_GT_EVENTS text
FORM eventtab_build CHANGING lt_events TYPE slis_t_event.
CONSTANTS:
gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
gc_formname_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = lt_events.
READ TABLE lt_events WITH KEY name = slis_ev_top_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE gc_formname_top_of_page TO ls_event-form.
    APPEND ls_event TO lt_events.
ENDIF.
define END_OF_PAGE event
READ TABLE lt_events WITH KEY name = slis_ev_end_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE gc_formname_end_of_page TO ls_event-form.
    APPEND ls_event TO lt_events.
ENDIF.
ENDFORM.                    " EVENTTAB_BUILD
*&      Form COMMENT_BUILD
      text
     <--P_GT_LIST_TOP_OF_PAGE text
FORM comment_build CHANGING gt_top_of_page TYPE slis_t_listheader.
DATA: gs_line TYPE slis_listheader.
DATA: today_date(10) TYPE c.
CONCATENATE
sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO today_date.
CLEAR gs_line.
gs_line-typ = 'H'.
gs_line-info = 'MOBLIST DETAILS'.
APPEND gs_line TO gt_top_of_page.
CLEAR gs_line.
gs_line-typ = 'S'.
gs_line-key = 'Date:'.
gs_line-info = today_date.
APPEND gs_line TO gt_top_of_page.
GS_LINE-KEY = 'User:'.
GS_LINE-INFO = sy-uname.
APPEND gs_line TO gt_top_of_page.
CLEAR gs_line.
gs_line-typ = 'A'.
gs_line-info = 'ACTION'.
APPEND gs_line TO gt_top_of_page.
ENDFORM.                    " COMMENT_BUILD
*&      Form CALL_ALV
      text
--> p1        text
<-- p2        text
FORM call_alv .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
   i_callback_program = g_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
   is_layout = gs_layout
   it_fieldcat = gt_fieldcat
     it_sort = gt_sort
     it_events = gt_events
     is_print = gs_print
   TABLES
     t_outtab = IT_MOBLIST
   EXCEPTIONS
     program_error = 1
   OTHERS = 2.
ENDFORM.                    "CALL_ALV.

Hi,
add:
1) to IT_MOBLIST
text3 type zfm_handy-text3,
kostl type csks-kostl,
end of it_moblist.
2)...
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'KOSTL'.
fieldcat_ln-tabname = 'IT_MOBLIST'.
fieldcat_ln-no_out = ' '.
fieldcat_ln-seltext_l = 'KOSTL'.
APPEND fieldcat_ln TO gt_fieldcat.

I want to add new songs to my ipod. When I set it up with itunes years ago I had a different computer that I no longer have. Now it will not let me add new songs to my ipod shuffle without erasing everything that is already on it. Help!!!

I want to add new songs to my ipod. When I set it up with itunes years ago I had a different computer that I no longer have. Now it will not let me add new songs to my ipod shuffle without erasing everything that is already on it. Help!!! Is there any way around this?

Yes, I was aware of this but the phrase "Any items imported from audio CDs or acquired from other sources will not copy from your device to the iTunes library." is what worries me. Will this eliminate my Notes, Calendar Events, etc or will it apply mostly just to the music?

Want to add new field in QA32/QA11 transaction under inspection lot stock

Dear Experts,
I want to add new field in QA32 transaction under inspection lot stock tab or under characteristic tab.
The reason behind is: Depends upon UD decision i want to assing customer name. So already we are having one Z Report for all the lots against this lot we have to display customer name.
So in order to fetch customer name in the Z report we want to assing customer through F4 selection in the usage decision screen.
I know this is possibe for Make to order scenario, but our senario is make to stock.
Please advice your valuable inputs.
Regards.

Hi Sujit,
Can you please elaborate it,coz i'm using the same but if i place the break-point in PBO of sub screen,the break-point won't be triggered.and is there any additional step to get the data from function group? if yes, please explain me indetail.
If possible please provide the sample code for this.
Thanks Inadvance.
Madan
Edited by: Madan.ngt on Mar 3, 2011 7:16 AM
Edited by: Madan.ngt on Mar 3, 2011 7:17 AM

I am using strobe media playback but i want to add new button for subtitle in control bar,Can anybody tell me how can i do it.

I am using strobe media playback but i am not able to add new button for subtitle in control bar.
I have imported assets.fla file in Flash professional but i do not understand how add new button in this fla and then link with action script method to show subtitle.If anybody know about it please tell me.

Hi,
Yes you can add video subtitle and I can give you the details how to do
that. Can you please advise which type of files you have for video
subtitile and how many language you want to add. i.e. text files or xml
files.
Best regards,
Sunil Kumar
On Thu, Jan 15, 2015 at 5:22 PM, Add Subtitles to OSMF and <

Want to add new songs

i want to add new songs cuz i just dl some.... but iono how to add it without syning it
iono Windows XP

Well, giving us a little more info would've helped!
How do you currently have the iPod set to transfer songs, is it auto sync or manual?
Do you keep all your songs stored in your iTunes library after transferring them to the iPod?

Want to add OBTYP field in existing filtergroup in BD64

Hi Guru's,
I want to add OBTYP field in existing filtergroup in BD64 can any one help me in this regard.

Hi......
Check these links :
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d4712d2cad43ffb56f82733a560c3d/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/01/3b15301edf48169f91ec2b5b0cbe2c/frameset.htm
It may help you.......
Regards,
Debjani.....

I have an external hard drive set up as a Time Machine backup on my IMac. I want to add a second external hard drive and put my Aperture Photo Library on it. Is there a way to have the photos on this second hard drive automatically back up to the Time Mac

I have an IMac with an external hard drive set up as a Time Machine for automatic backups. I want to add a second external hard drive and load my Aperture Photo Library on to it so that the library can be shared by both me and my wife. Is there a way to automatically backup the photo library that will be on the second hard drive to the Time Machine hard drive?

Open System Preference > Time Machine
Click Options....
Ckick on external disk in list and hit the - button below the list to remove from the Exclusion list
Allan

HT5628 When will Windows 8.1 be supported on Boot camp 5? I have a new Mac book Pro 2013 and cannot install. Apple please advise.

When will Windows 8.1 be supported on Boot camp 5? I have a new Mac book Pro 2013 and cannot install. Do I return the Windows version and try to download 8.0, or wait it out until it is supported? New to Mac's.
Apple please advise.

Apple does not respond in these forums except occasionally an Apple employee will stop by. If you want to contact Apple, use the contact us link at the bottom of this page.
With respect to your question "When will Windows 8.1 be supported on Boot camp 5?" you are asking us to speculate as to when Apple will release their drivers supporting Windows 8.1. We do not know, and we can not speculate as to when. From the terms of use of this forum:
"Unless otherwise noted, do not add Submissions about nontechnical topics, including:
Speculations or rumors about unannounced products."
The planned dates of production or release of Windows 8.1 drivers are speculation about the drivers.
With respect to your other question, "Do I return the Windows version and try to download 8.0, or wait it out until it is supported? New to Mac's.". I answered you.

I want to add new mac to existing wired and wireless network

Similar Messages

Maybe you are looking for