I want to bcc myself when sending mail from one account but not another. When I check "automatically bcc myself", it bcc's me from both accounts. Can I set this to work with only one account?
I have two mail accounts on my Mac. I want one account to bcc me when I send emails from that account. I checked "automatically bcc myself" under mail>preferences>composing, but both accounts bcc me when sending mail. Can I set this to only bcc myself from one specific email account? Thanks.
It does not make sense that your ssh does not have a dash capital Y (-Y) option. It is in "man ssh", and my 10.6.6 has the -Y option, and I've had a -Y option since at least Tiger (10.4) days.
My ssh is in /usr/bin/ssh
I'm not very good at X11 issues, so I'm just throwing ideas out there.
Does your broken account have a $HOME/.ssh/config file, and if so, what is in it?
Does the broken account have any $HOME/.x* or $HOME/.X* files that X11 might be reading to configure your X11 behavior differently from the new test account?
$HOME/.Xauthority
$HOME/.Xdefaults-<hostname>
$HOME/.Xresources
$HOME/.ICEauthority
$HOME/.keymap.km
The above are a few names I found looking through "man X"
While I'm thinking about it, I assume that when going to the server, you are using the exact same user account on the server, so that you have a constant at least at that end.
Have you tried trashing your
$HOME/Library/Preferences/org.x.X11.plist
file, to see if that is affecting the broken account?
Again, I am just throwing out ideas to see if anything sticks.
Similar Messages
-
Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?
You have to look at the email protocol being used. the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
Does the email system permit delivery receipts to be requested?
Just some of the things one needs to determine from the information provided by the email service provider. -
My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host> -
I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation. It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0. How can I get this to work?
Oaky, at least we got that far. Next step is to determine if all those "numbers" are really numbers. Changing the format to "number" doesn't necessarily change the string to a number. The string has to be in the form of a number. Some may appear to you and me as numbers but will not turn into "numbers" when you change the formatting from Text to Number. Unless you've manually formatted the cells to be right justified, one way to tell if it is text or a number is the justification. Text will be justified to the left, numbers will be justified to the right.
Here are some that will remain as strings:
+123
123 with a space after it.
.123 -
hi all,
I would appreciate if anyone could confirm whether this adapter will work with a micro SD card? I have the adapter that converts the micro SD to normal SD, so would this adapter work:
http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit#ove rview
thanks very muchi have a helmet camera that records videos and i have been told my the manufacturers that this will work for that too?
-
How can I get this to work with NAT?
Hi Masters,
I need to add a route-map to a static NAT but the option seems to be available only if using inside/outside NAT, not if using enable NAT.
This is a CISCO1921/K9 running 15.2(4)M6
Here's what I mean:
R2(config)#ip nat inside source static 192.168.3.20 10.10.10.20 ? --> allows the route-map option to be appended
extendable Extend this translation when used
mapping-id Associate a mapping id to this mapping
no-alias Do not create an alias for the global address
no-payload No translation of embedded address/port in the payload
redundancy NAT redundancy operation
route-map Specify route-map
vrf Specify vrf
<cr>
R2(config)#ip nat source static 192.168.3.20 10.10.10.20 ? --> no route-map option
extendable Extend this translation when used
no-alias Do not create an alias for the global address
no-payload No translation of embedded address/port in the payload
vrf Specify vrf
<cr>
What I need is multiple dynamic and static NAT rules between multiple interfaces, so I need a way to assign multiple static NAT depending on the destination.
For example, if server 192.168.3.0 wants to go to VLAN A, get statically translated to IP 1.
If the same server 192.168.3.0 wants to go to VLAN B, get statically translated to IP 2.
AS far as I know I need a route-map attached to the static NAT statements to make this happen, but the option is not available as shown above. And I don't want to use normal inside/outside NAT since I need the interfaces to allow NAT in both directions.
If anybody can share some light will be very appreciated!Paul,
The commands:
ip nat source list or ip nat source route-map works fine for dynamic NAT or PAT, but I need static NAT.
And the Static PAT statements won’t work since we need all ports defined.
So, I guess I need a way to map static NAT depending on the destination using domain-less NAT.
Can this be accomplished? -
I do not have a pc or mac. how can i set up hp photosmart with only an ipad 1 ?
See subject line.
Hi,
In this case, firstly your printer must be in the floowing list
http://support.apple.com/kb/ht4356
And you can check this:
http://www.apple.com/au/support/iphone/assistant/airprint/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Cannot send mail from .mac account in Entourage
I am a new mac user so my troubleshooting skills are very weak. Until about one week ago, i was able to send mail from both my hotmail account and my .mac account. Now, i get this error (just on my .mac account):
An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.
i read through much of the support articles, but did not find my specific error. can anyone help??
thank you
mknz
MacBook Pro Mac OS X (10.4.7) new mac user
MacBook Pro Mac OS X (10.4.7) new mac userit may be that your server (internet provider) has just started blocking outgoing mails not authenticated by them.
Go to your account set up...
and fill in the following details.
SMTP SERVER: smtp.mac.com
then click on advanced sending otions...
click on override default SMTP port... type 587
click on SMTP servber requires authentication...
use same setting as receiving mail server.
try this... -
Cannot send mail from Exchange 2013 to Exchange 2007
I have an
Exchange 2007server with all roles in the same server (Version:
08.03.0327.001 ) on a Windows 2008 R2 server. I have now installed two Exchange 2013 servers both with CAS and MBX roles on Windows 2012 servers
(full patched). There is also a DAG between the new servers. All mail goes through a BorderWare besides the internal mail.
I can send mail from both environments to the Internet. I can also send internal mail from Exchange 2007 to Exchange 2013.But the problem is that I am unable to send from Exchange 2013 to Exchange 2007. I've debugged, but not solved the problem and there are
few articles on the Internet.
Any suggestions?These two sentences are in conflict : "I can also send
internal mail
from Exchange
2007 to
Exchange 2013. But
the problem is
that I am unable
to send from Exchange
2007 to
Exchange 2013. "
Can you describe what is your real problem? Flow from E2007->E2013? Or vice versa?
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir -
How do I send email to a group but not have their address show?
Entourage has a function where you can create a group but check a box that says "do not show addresses when sending to group". I want to be able to send email to my HOA, but not have everyone show up and not use bcc if possible. Is there a way to do this?
Mail Prefs, Composing, uncheck the box, "When sending to a group, show all addresses."
-
I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!
In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie -
I am not receiving mail to one of my email accounts. I can send mail from this account and all other accounts seem to be working.
Is this work email account on a BES server?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network
Hello Jesslb23,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Best of luck,
Mario -
When I try to send mail to multiple addresses, it tells me it cant send with selected server. It sends mail to one address fine.
contact your email service provider and ask them (it might treat multiple e-mails as SPAM)
-
Cant send mail from i phone 3s, with a tiscali account
I can no longer send mail from my tiscali mail account on my i phone 3s, or my ipad without going through web mail account. please can anyone advise
Isn't mail.virgin.net the name of the Incoming Server -- the incoming server, which you say is working is set up at Mail Preferences/Accounts/Account Information as to name of the server, Username, and password, along with entries in Mail Preferences/Accounts/Advanced for Port select for the Incoming.
However, if that is working for you, you must have it correct. For the Outgoing server, isn't the proper name for Virgin services smtp.virgin.net? In Mail Preferences/Accounts/Account Information, click on the arrows beside the name of the SMTP, and choose Edit Server List. Remove all, or all but one of any references to the smtp.virgin.net. Enter anew, or with the remaining server, click on the Advanced Tab there, and choose Use Custom Ports. Then enter the Custom Port to be Port 25, and set the Authentication to None, and have no entries in Username or Password. This is consistent with those specs I can online saying the SMTP does not require Authentication.
Also click Use this server only. Now if the smtp.virgin.net server is online, it should work.
Ernie
Maybe you are looking for
-
I have two computer terminals. One is connected to internet. THen I have another with an internal network set-up, not connected to internet. Thunderbird installed on both. I download emails on the internet computer, export the messages on a USB stick
-
JOIN for BSEG, BSIS, BSAS, MSEG, BKPF and MKPF
I am developing a report related to G/L . i am using the Tables BSEG BSIS BSAS MSEG BKPF MKPF ............please give me the Joinings of these tables.......how exactly we can join and get the prefect Data.... Thank U waiting for ur replies.... Title
-
Pictures in icon mode in folders some tiled..some not..ugh!
I have a MacPro tower, running OS 10.5.5, my question is when I am going through my various folders looking for pictures some are clear and some are tiled and I have to open them to see them clearly, it's a hassle and time consuming, anyone know why
-
-
HT2234 Why is my writing so big?
My writing in the Notes app is way too big and in Messages too. I looked everywhere but I can't find how to fix it.