I want to be connected to the encoder with umi board.

hi anyone help me please !!!
i'm beginning labview
I use labview 2009 sp1 , MAX 4.6 ,PCI 7354 ,umi 7774 motion interface. i want to drive DC servomotor and p
osition control with encoder.
i have questions?
UMI 7774 have to connect with encoder that have A,A-,B,B-,index,index- ?
If not how to do?
Do i have to wire inverting gate?
I want to test the encoder test on MAX and wiring follow manual but no have encoder signal.
If measuring with oscilloscope have a signal. why is it?
thank for any advice you have
P.S. sorry my writing is bad. If i am not polite so sorry.
Solved!
Go to Solution.

i use second hand motor " pittman 14202 series".
a name plate is 14202D335-R1 385-22-001 24VDC 1000CPR 05-10-00.
a encoder maybe E30A. It have not Index channel because i measure A signal and Index signal.they're inphase.It's strange.
Do you think about it?
and if i haven't Index channel. what should i do it?
thank you very much for reply
Attachments:
E30 encoder.pdf ‏99 KB
Pittman Motor__14202 Series.pdf ‏44 KB

Similar Messages

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello. I can say that you have a quite strange „huge question”… It’s non-sense to stay connected with your car which is hundreds miles away. Unless…
I have a theory. You don’t want to controll your car, you want to controll somebody who is driving the car. Volvo XC 60 is a nice family car, usually used by married men between age of 35-45, probably with small children, so it’s very unlikely that you want to controll your teanage kid, mainly because probably even if you would give him/her to drive the car in the neighborhoud, I don’t think that he/she would be „several hundred miles away”… If your child is not young teneage anymore, and he/she has his/her own life, but you want to control him/her, that is sick… So I am convinced that you want to controll your husband who probably travelling often! Am I wright?
Isnt’t nice at all! Would you like if you would be monitorized in such way? I bet you don’t!
Anyway, iPhone is smart, you can use for many things, but come on, you really were thinking that there is such kind of application???
What could you do it's to put in the car a GPS survelling system, however I don't think that you could do it without your husband knowledge, otherwise he won't be able to start the engine...

WRT 120N- Cannot connect to the internet with more than one PC at a time.

Before I went on a three month vacation,I could connect 3 or 4 PC's either wireless or wired to my router with no problems at all.I have a desk top and a laptop computer which I use at home.After I returned,I found that I could connect to the internet with only one PC at a time.
If I was say,connected via my laptop,my desk top would continuously keep getting disconnected and vice versa.I have been reading the suggestions from experts here and have done a few checks based on them.I also cannot get to my router page which is 192.168.1.1 I keep getting a message that says "Problem Loading Page" and this happens with both,Firefox and Internet Explorer.I am running Windows 7 - 32 bit on my desk top and Vista Home Premium on my laptop.
I have opened the "Command Prompt" dialogue and pinged 192.168.1.1 and thereafter I typed in "ipconfig".These are the results:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Gordon>ipconfig
Windows IP Configuration
PPP adapter Brownwolf:
   Connection-specific DNS Suffix . :
   IPv4 Address. . . . . . . . . . . : 92.98.42.65
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . : 0.0.0.0
Ethernet adapter Local Area Connection* 22:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:35a2:8753:8832:f494
   Site-local IPv6 Address . . . . . : fec0::c:35a2:8753:8832:f494%2
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:35a2:8753:8832:f494
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:a408:59a3:918e:f0ab
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:a408:59a3:918e:f0ab
   Link-local IPv6 Address . . . . . : fe80::35a2:8753:8832:f494%12
   IPv4 Address. . . . . . . . . . . : 192.168.0.1
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:413:cf4f:77af:474d
   Site-local IPv6 Address . . . . . : fec0::c:413:cf4f:77af:474d%1
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:413:cf4f:77af:474d
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:1591:ad9:13da:8fea
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:1591:ad9:13da:8fea
   Link-local IPv6 Address . . . . . : fe80::413:cf4f:77af:474d%11
   IPv4 Address. . . . . . . . . . . : 192.168.1.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : fe80::35a2:8753:8832:f494%11
                                       192.168.1.1
Tunnel adapter Local Area Connection* 7:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 14:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 15:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 19:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 20:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41::5c62:2a41
   Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
Tunnel adapter Local Area Connection* 23:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 24:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 28:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
I presume that this model is a modem **bleep** router as I do not have a separate modem with my system.I have a DSL connection and the firmware version of my router is ver.1.0.If I recall,I did upgrade to the next firmware upgrade a few months after I purchased the router but I am not sure.
I use both my PC's to run a small business venture and I am worried that resetting the router may cause some other problems and will stop me from using the internet.
The Command Prompt information above was taken from my laptop.
Any help will be really appreciated.
Gerard.
Solved!
Go to Solution.

brownwolf66 wrote:
No,I have a desk top and a laptop and I cannot access 192.168.1.1 on either of them.In my OP,I have used the Command Prompt dialogue on both computers to ping 192.168.1.1 and I have attached the results.This is what I got:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
The results I obtained using ipconfig in the command prompt have already been mentioned in my OP.
I do not know if the above result is what it is supposed to be but I still cannot access my router's home page.How do I verify if there is a proxy server and if there is one,how do I disable it in my browsers?This problem occured suddenly as a few months earlier all was well.It's getting rather frustrating.
I suggest resetting the router. Make sure firmware is updated. You can download it here - http://homesupport.cisco.com/en-us/support/routers/WRT120N. After firmware upgrade, reset and reconfigure. Just access the link below to guide you setting up the router.
* Setting up a Linksys router for DSL Internet connection
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
* Setting up a Linksys router with Cable Internet service
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

How do I connect to the internet with my new IPAD ?

How do I connect to the internet with myt new Ipad

See here for connecting to the Internet:
http://support.apple.com/kb/HT1695
If you have any problems there is troubleshooting advice here: http://www.apple.com/support/ipad/wifi/

How do i connect to the internet with my ipad?

how do i connect to the internet with my ipad?

Did you turn WiFi on in the Settings App? If WiFi is turned on, your iPad should be able to see any WiFi networks that you can connect to and you should be able to tap on one of those, enter a password if needed and then tap the join button.
I get the feeling that you know this and the problem needs further explanation so ... Can you explain in more detail?

How do i connect to the internet with apple tv

how do i connect to the internet with apple tv

Ethernet cable from your router, or configure wifi in Settings.

My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem. Windstream tech service is useless. i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help! windstream said everything is working on their end, yea right. What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products.
these are brand new machines with lion.
This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great. Please help before my wife losses it
thanks

There is a 2701HG-B, and a 2701HG-D. If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
By the way tell your wife it isn't that bad. At least you have an ethernet DSL modem. There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access. At least now only the craziest DSL providers still use those modems.

Can no longer connect to the internet with the 580...

Hi, my PC was able to connect to the internet with my 5800 via a USB cable. Now, I can no longer connect to the internet with the 5800 via a USB cable.
I had never tried connecting the computer to the internet with the 5800 via Bluetooth prior to this incident, so I tried that. Strangely, it works.
My question is how come I can no longer use the 5800 via USB as a modem, but how come the 5800 via Bluetooth still works as a working modem?
Sorry, if my sentences are confusing. I have a terrible headache at the moment. While the Bluetooth connection works, I just feel better using the USB connection and knowing that my 5800 has a clean bill of health.
BTW, my PC is on Windows 7 Professional at the moment. I've tried uninstalling the Ovi Suite and reinstalling it, but that didn't work. I've also tried using PC suite instead of the Ovi Suite but that didn't work either. What other options do I have, beside hard resetting the phone? Thanks in advance.
Edit: BTW, the message shown when I tried to connect to the internet with the 5800 USB modem was "failed to establish a network connection".
Solved!
Go to Solution.

Hi,
I am so much tierd by trying to connect my phone to pc.
I have nokia 5800,and I used to connect my phone to PC by USB cable.
But from last 5 days I could not able to connect it.
The problem is that,
when I connect phone to pc,notification comes up that phone connected via ovi suit,but within a minute or 2,
"porable device" icon disappears from the task bar in the right hand corner,so connection could not proceed further.
Please help me in this asap.
I had tried following already:
1.format my PC
2.Installed new ovi suit
now please give me a proper solution on that.
thank you.

Can't connect to the internet with airport or firewire

I can't seem to connect to the internet with airport or firewire. I recently restored my old G4 mac mini PPC 1.42 (with airport and bluetooth) Tiger 10.4.8 with a new harddrive. I have it connected to my leopard mac pro, internet sharing is on (both computers), the systems are connected, however, the mini just can't connect to the internet. tried it also using airport, no go. network diagnosis seems to go in a constant loop.

works ok with ethernet connection though.
that'll work.

Can I connect to the internet with an Ipad in Santo Domingo, DR while I'm on vacation?

Can I connect to the internet with an Ipad in Santo Domingo, DR while I'm on vacation?

Lots of hotels in the DR have WiFi. And there is plenty of cellular coverage in Santo Domingo (and elsewhere).
One thing to be careful of, the WiFi networks are usually not secured and are very vulnerable to people "listening" for passwords and user names, so don't do any financial transactions online and perhaps consider setting up some temporary passwords for the trip and changing them when you get home.
-dan

I am connected to the computer with my phone and it says there are 0 photos to import, however I have over 200 on my phone to import. I am trying to figure out why they aren't showing up.

I am connected to the computer with my phone and it says there are 0 photos to import, however I have over 200 on my phone to import. I am trying to figure out how to get itunes to recognize the photos on my phone. This has never happened before.

Have you tried to reset the iPhone and tried again to import?
To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.

INS0009: Unable to connect to the database with user SYS

Hi all,
I'm trying to create an OWB repository with OWB repository assistant (10.2.0.2.) on a 10.2.0.1. database (windows XP platform). I get the following error every time I fill in the connect info for the SYS user:
INS0009: Unable to connect to the database with user SYS. java.sql.SQLException: ORA-01017: invalid username/password; logon denied
I can connect to the database (sqlplus sys/<password>@orcl as sysdba) and the OS user is in the ora_dba group. Also checked the database parameters remote_login_passwordfile (= EXCLUSIVE) and O7_DICTIONARY_ACCESSIBILITY=TRUE.
Does anyone know what the problem is? Any help is appreciated.
Regards,
Quinten

Ok I found the problem myself, I used the wrong sys password :-(. I thought the password I used to logon in sqlplus was right (sqlplus sys/<password>@orcl as sysdba) but the password doesn't matter when you logon as sysdba! So I altered the password for the user sys and now I can continue the steps of the repository assistant.
Quinten

I am unable to connect to the Web with Firefox, the firefox site displays on screen, yet I can connect on the same desktop computer to Internet explorer and Opera, what is preventing me from opening the firefox browser

I am unable to connect to the web on my desktop with Firefox 8, the program displays but will not connect to the Internet, Other browsers Internet Explorer and Opera do connect on the same machine. McAfee is not blocking it, virus checks detect no virus yet yesterday it worked perfectly

I tried what was suggested by starting in Safe Mode but the problem still exists. I am frustrated as I cannot connect to my Verizon Fios page. I can connect to the Internet with the Firefox Browser and can go to any web site except finding my Verizon Home page.

Unable to connect to the internet with my Fujitsu ...

Ive just got a Home Hub 4 and have connected it to my laptop, a Fujitsu Esprimo V5535. But it is only giving me Local Only Access. Which means I cant connect to the internet. The Home Hub is working fine as my netbook and other mobile devices are all connected ok but my laptop isnt.... Is there anything I can do to resolve this?

Did it connect to the Internet with your old homehub?
Make sure the network card drivers on the laptop are up to date using the manufacturers website rather than Windows which can be out of date. You will need to connect by Ethernet cable to download them or download them on another device and copy them over.

Why is it that every time I try to connect to the Internet with my Mac the whole Wi-Fi system comes down and it's only when I turn on my Mac

Every time I try to connect to the Internet my Mac always makes the Wi-Fi turned off and we have lots of iPads and iPhones and they are fine when we try to use them but as soon as I my Mac it doesn't work. When we have a PC try to connect to the Internet nothing happens but when I try to connect to the Internet with my Mac the Internet turns off

See:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]]

I want to be connected to the encoder with umi board.

Similar Messages

Maybe you are looking for