I want to change my body pavilion g6.

I want to change my body pavilion g6. because its body has borken. How can i do it or Where can i find it to buy?

Hi,
You can check this out from the following link:
   http://partsurfer.hp.com/search.aspx
or use the following manual to find the right part number then use the above link to order:
  http://h10032.www1.hp.com/ctg/Manual/c02770249.pdf
You can use this manual to repalce it yourself.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Want to change message body of OPEN_MAIL_DIRECT (Notification Mailer messag

    The default value of the BODY attribute is blank. The attribute description says 'substituted message body', type 'text' and source 'send'. How do I determine what it's substituted with?
    How would i determine which package is used to form the value of the body.

    Yes, the value for &BODY is dynamically built within PLSQL or OA Fwk (11.5.10 onwards) based on how the notification message is defined.
    PLSQL Notification
    Procedure WF_MAIL.GetLOBMessage3 procedure calls WF_NOTIFICATION.GetFullBody to get the content and WF_XML.GenerateMessage replaces the &BODY token in 11.5.10.2. Please note that these APIs are for internal use only since I don't see them in Workflow API guide.
    WF_NOTIFICATION.GetFullBody generates the notification body.
    OA Fwk Notification
    The procedure WF_XML.GenerateMessage leaves the &BODY token unsubstituted and provides an URL to OA Fwk page NotifMailerPG that generates the content. The mailer that runs within a concurrent manager invokes this URL and replaces &BODY token before sending it as e-mail.
    oracle.apps.fnd.wf.worklist.webui.NotifMailerPG generates the notification body. Please refer to Embedding Oracle Applications Framework Regions in Messages in Oracle Workflow Developer Guide for more information.
    In summary, it could be either PLSQL or OA Fwk that could be generating the content based on how you have defined the notification message.
    Hope this helps.
    Vijay

  • I want to replace the body of iPhone gold 5s

    My iPhone fell down on the floor by mistakenly. So I want to change the body of my iPhone. Now I have got a small scratch on the side of the iPhone. It's just above the silent button. Will you be able to replace it or should I buy a new case for the iPhone ?  Please let me know if it's costing me. I'm now living in Dubai. Is there any chance for me to get a new case. I want my iPhone to look as if new one with original body. Golden colour.

    We are all fellow users and not Apple employees...to do what you want to do will mean an out-of-warranty replacement of the iPhone.  In the US that is $269 for the iPhone 5 series.

  • I want to change the final date format in MM/DD/YEAR.

    HI all,
    I want to change the final date format in MM/DD/YEAR. Even my profile will be in any format like DD.MM.YY or YY.MM.DD .
    can any body tell me the way..

    declare variable:
    DATA : gv_date(10) TYPE c.
    and assign value to it:
    CONCATENATE sy-datum+4(2) sy-datum+6(2) sy-datum(4) INTO gv_date SEPARATED BY '/'

  • Display Do u want save changes or not? message while closing the window

    Hi All,
    I have one requirement.I developed one form that contains 4 windows.
    I entered in the 3rd window and i have made some changes but not saved.when i close 3rd window it is not giving any message like 'Do u want save changes?'after closing the 3rd window cursor will go to 2nd window.if i open 3rd window again it is propmting the message(Do u want save changes or not?).How can i get this message while closing the 3rd window?
    i have written the following code in app_custom body
    IF (wnd = 'WINDOW1') THEN
    app_window.close_first_window;
    ELSIF (wnd = 'WINDOW3') THEN      
    lv_wnd_status := get_window_property('WINDOW2',VISIBLE);
    IF lv_wnd_status = 'TRUE' THEN
         go_item('BLOCK2.ORDER_NUMBER');
         set_window_property ('WINDOW3', visible, property_false);
    ELSE
    app_window.close_first_window;
    END IF;
         ELSIF (wnd = 'WINDOW2')
    THEN
    lv_wnd_status := get_window_property('WINDOW3',VISIBLE);
    IF lv_wnd_status = 'TRUE' THEN
    set_window_property ('WINDOW2', visible, property_false);
    ELSE
    app_window.close_first_window;
    END IF;
         ELSE
    app_window.close_first_window;
    END IF;
    Can anyone give me some idea.
    Thanks in Advance
    Edited by: DhanaSurya on Apr 27, 2010 9:41 PM

    Iis this the only code which you used to hide/display window?
    Might be some navigation is happening in your form. Like if there is relationship between window2 and window3's block and when you access the window2 then you try to move to the next reocrd and then you are try to go to the WINDOW3's block.
    Or there is any CLEAR_BLOCK built-in bieng use in you form.
    -Ammad

  • Want to change Date format in ISA webshop

    HI,
        I want to know how to setup a date format in ISA webshop. Currently our webshop is showing as mm/dd/yyyy format. we wanted to change it to dd/mm/yyyy format.
    Can any body suggest me how to change it.

    Hi,
    Do this.
    DATA: lv_dt(10)  type c.
    lv_dt =  table1-f1( the field from which ur date is coming.)
    concatenate lv_dt6(2)  lv_dt4(2)  lv_dt+0(4)
                                    into lv_dt
                                    separated by '.'
    write:/ lv_dt.
    This will sove ur problem
    Regards:
    Sapna
    Do reward points if u find this helpful

  • I want to change my simulate view of document in transaction code F-02

    Dear all
    I want to change my simulate view of document in transaction code F-02 and want to display line item text there in my simulation.The standard layout in edit option"FB00" is "SAP01 SAP standard".This is in Doc. overview line layout.
    I want to add line item text in the line layout by copying the same.can any body tell me the menu path for resolving my problem
    Thanks in advance
    Regards
    Requester

    Hi,
    Use transaction O7E6 and create your own variant and then set up using transaction FB00.
    Award points if helpful.
    Sadie Gajanand

  • Have a program on my computer to remember passwords, i want to change one how do i find that program

    hp pavilion with windows 7- 64 bit
    I want to change my password on a program I run online.
    thanks

    Type in the first letter of your user name, auto-complete will bring up a box of choices. Highlight the username you want to use. Hit the "delete" key. Another auto complete window will pop up saying, "windows has a stored password for this user name. Do you want to delete the username and password?" Click, "yes". Close explorer window and when you reopen you should be able to type in your user name and password and it should ask , "do you want to save this password?"
    Alternately, you can use third party tools to do so. here is one such software:
    http://www.nirsoft.net/utils/internet_explorer_password.html
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Want to replace my Hp pavilion dv6-6155tx motherboard

    Hi
           I have a Hp Pavilion dv6-6155tx laptop with i5 processor.  My problem is the keyboard slot on the motherboard gets damaged and its not repaired. So now i have two options left one i can use a USB keyboard or change the motherboard.
    so i want  to change the motherboard of my laptop .
                            Can you please tell me what is its present cost and from where i can get the original motherboard with the same configuration with 1GB AMD graphic card. Following are details of my laptop :-
    Product Name ----------------   dv6-6155tx
    Product Number --------------  QG478PA
    Microprocessor ---------------   2.4 GHz Intel Core i5-2430M
    Operating System -------------     Window 7 Home basic- 64 bit
    Video Graphics  -----------------   AMD Radeon HD 6490M (1 GB GDDR5)
    This question was solved.
    View Solution.

    This is the motherboard part number:
    659150-001
    This is a link to your Service Manual:
    Manual
    HP asks $300 for it as an exchange:
    http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=3DAFF298421540C688BD30622A3A90DE&Searc...
    Much less on eBay:
    http://www.ebay.com/itm/HP-Pavilion-DV6-DV6-6000-Laptop-Motherboard-647018-007-659417-001-659150-001...
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Change HTML Body background

    Hi all,
    I am just learning how to create websites from scratch, I am currently using dreamweaver cs3 (yes very old).
    I have just created my first site, but I am getting this grey edges surrounding the actual page.
    I was wondering can I get rid of them without creating another template or page. Or, if I could change the colour that would be fantastic.
    my website address is: http://www.apkashukriya.com
    Please can someone help me.
    Many thanks
    Kish
    Message was edited by: Sudarshan Thiagarajan to change 'Post Title'

    Do you mean the 'grey' background that surrounds your actual content in the center?
    If yes, modify the following lines of code in your .html file:
    body {
    font: 100% Verdana, Arial, Helvetica, sans-serif;
    background: #666666;
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
    color: #000000;
    Remove the 'background' line. This assigns a background color to your entire 'body' of the document.
    If you want to change from grey to another color, change the #666666 to another hex value. #000000 gives you black, #ffffff gives you white and so on... You can open this file in DW, when you try to change the #666 value, you will be prompted with a 'color picker' dropdown that you can choose your desired color from.
    Good luck.

  • How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

    How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

  • Hi it's me rabia and i'm apple user  I want to change my cell phone because it's having scratches on it and i also feel like its home button did't work correctly  So i want to know that can i have a new cell phone on replace of this one at any nearby of m

    Hi it's me rabia and i'm apple user
    I want to change my cell phone because it's having scratches on it and i also feel like its home button did't work correctly
    So i want to know that can i have a new cell phone on replace of this one at any nearby of my house App store without any cost  ?
    But i'm not having any line yet on my phone i use it on net mostly so what is the scene can i have or can't ??
    please inform me soon !

    Is your phone still covered by warranty?  If so, go to your nearest Apple store and depending on what happened, this may or may not be covered by warranty.  If it is, then you can get a replacement exactly as the phone you already have.
    If out of warranty, then there is nothing you can do and you'll have to pay.

  • I got an iPhone 4 a week ago. I synced my iTunes once and now I want to change what albums and playlists are on my phone. When I try to do this, iTunes threatens to remove all my apps. Of course, Apple's support is no help.

    I got an iPhone 4 a week ago. I synced my iTunes once and now I want to change what albums and playlists are on my phone. When I try to do this, iTunes threatens to remove all my apps. Of course, Apple's support is no help. I know there has to be a way to add and remove whole albums and playlists like on the music tab on the device, so please don't tell me to uncheck/delete everything from my iTunes that I don't want and re-sync. That is not helpful and not the issue. How do I get around it threatening to remove all my apps?

    On the MacBook, go to System Preferences > Security & Privacy > Privacy > Advanced > Disable remote control

  • When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    Debi....
    Try "resetting" your Apple ID password >  Apple - My Apple

Maybe you are looking for