I want to create RFC FM to enter data for employee in table pa0001

hi everyone,
i want to create either a RFC FM or a BAPI to enter employee data in table pa0001.
is there any other way to enter the employee data?
so plz help me by sending regarding RFC/BAPI creation.
thanx in advance.
from
jigar bhatt

Hi jigar,
1. HR_INFOTYPE_OPERATION
2. This is the FM to put data
in infotype 0001 (pa0001 table)
as well as other infotypes also.
3. But this is a simple FM
   (not rfc enabled)
4. For your requirement,
   u can create a Z FM,
which is rfc enabled,
and inside this Z fm,
call the HR_INFOTYPE_OPEARATION
5. Also consider the parameters of this FM,
   while defining your z FM.
regards,
amit m.

Similar Messages

I want to create a script to enter text for me

I dont want to remember my long library card number when I am on their site. I want to create a script to type it for me. I want to associate the script with a hot key. How do I do this?I

Assuming the library site is a webpage, use 1Password. It will do the job for you and securely. Been using it for years for just this kind of thing.
https://agilebits.com/onepassword/mac
You have to pay for it but there's a full 30 day trial so you can see if it works for you before parting with the cash.
(Disclaimer: NO, I'm not assoc'd with the company, just a very satisfied user of this s/w for several years).

Hi i want to create BAPI to get approver of the employee

hi i want to create BAPI to get approver of the employee
in this BAPI if there are two approver for that employee than i need both approver personal no.
please help me
thanks in advanced.

Hi
I doubt whether there is a direct Standard BAPI for that.
The below report will get you the employees approver org position. Even if there are two approvers are there, it will display both the approvers position.
*& Report ZGD_TEST_HR_ORG_STR
REPORT ZGD_TEST_HR_ORG_STR.
   DATA: plvar            LIKE hrsobid-plvar.
DATA: otype            LIKE hrsobid-otype.
DATA: sobid            LIKE hrsobid-sobid.
DATA: date             LIKE sy-datum.
DATA: leading_position LIKE hrobject OCCURS 1 WITH HEADER LINE.
DATA: org_agent        LIKE swhactor.
DATA: lv_sw_vapos      TYPE xflag,
        lv_subrc         TYPE sy-subrc.
DATA spfli_wa TYPE spfli.
DATA carrid_buffer TYPE spfli-carrid.
IF plvar IS INITIAL.
    CALL FUNCTION 'RH_GET_ACTIVE_WF_PLVAR'
      IMPORTING
        act_plvar       = plvar
      EXCEPTIONS
        no_active_plvar = 1.
    IF sy-subrc > 0.
      MESSAGE e300(5w) RAISING no_active_plvar.
    ENDIF.
ENDIF.
IF otype IS INITIAL OR sobid IS INITIAL.
      otype = 'US'.
      sobid = sy-uname.
ENDIF.
CALL FUNCTION 'RH_GET_LEADING_POSITION'
    EXPORTING
      plvar              = plvar
      otype              = otype
      sobid              = sobid
      date               = sy-datum
      auth               = ' '
      consider_vac_pos   = space
    TABLES
      leading_pos        = leading_position
    EXCEPTIONS
      no_lead_pos_found = 1
      OTHERS             = 2.
   IF sy-subrc > 0.
    MESSAGE e802(5w) WITH otype sobid
                     RAISING no_lead_pos_found.
ELSE.
    LOOP AT leading_position.
      write : / leading_position-otype,
                 leading_position-objid.
    ENDLOOP.
endif.
Hope it helps you

My client want to create realease strategy based on plant for PO

Hi all,
1.My clients want to create realease strategy based on plant for PO. Kinldy let me know the the possibilites and steps.If it is not possible let me know the reason so that I can explain to the client
2.how can I take print of credit note and MIRO kindly let me know T,code.
hope to hear back from you all....
Thanks&Regards,
chand

Hi chandysrm ,
You can creatye Release strategy for plant specfic.
Create charetestic (CT04) for plant : CEKKO-WERKS.
Assign with Class (CL02) --032
Create Rel. Group , Rel. Code & Rel. Strategy.
create rel. strategy for each different plant.
In classification view give the plant code.
[http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE]
[PO Release Resetting after Value Reduction;
[Separate release procedure for PO and PO under contract]
[release procedure for contract]
[release procedure for contract]
Credit note print out : MR90.
SAM
Edited by: Saminathan Gopalan on Jun 9, 2010 10:39 AM

I want to create a new customized screen layout for responsive HTML5 output. I don't want to use the ones present in the gallery. What are the steps to do so?

I don't wish to use the ones already present in the gallery. They do not meet my requirements. Therefore, I want to create/design my own screen layout for the responsive HTML5 output. Please let me know the steps to do so. How to create a SLZ file, what is the code that I need to write. What are the components that I need to create to have a complete screen layout to be used in a responsive HTML5 output.

That would require inline formatting and I doubt that is an option.
If I am following you, the header area is full width of the screen so I cannot see how it can be broader, Perhaps you mean deeper? A screenshot might help here. The change would be made in the layout.css file.
That would be a change in the layout.css.
I suspect that too is controlled by the layout.css.
To make the changes you would have to go into the layout.css and modify that. As you will see, it is a very complex CSS and that is why I said creating you own layout is not easy. Hopefully when Willam is available again, he may be able to give you some more specific information.
I think Willam will confirm that if you cannot read the existing CSS to make those changes, then creating your own skin would be beyond your capabilities. Please do not take any offence there, I am simply emphasising how complex a task it is to create a skin from scratch. It's not one I would take on.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Can we enter data in any standard table directly through custom form??

Dear All,
Can we enter data in any standard table directly through custom form??
I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
Awaiting regards,

Hi,
Can we enter data in any standard table directly through custom form??
I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
Awaiting regards,
I would not recommend touching the standard tables at all unless you are being guided by the SR. For a record to be in the standard table it should go through series of validations based on the what operation you are performing and some times datas are dependent upon the other tables, and also some times the same records are hit to so many other tables simultaneously.
Therefore I would not recommend this brother.
Thanks &
Best Regards,

Please do not enter data for payment method Cheque papel error in IT0009

Hi Experts,
Whenever i try to maintain bank details infotype for payment type C(Check Papel),the system is throwing error "Please do not enter data for payment method Cheque papel". As per SAP std, I had deleted the entries for bank key, bank account and bank control key and maintained IBAN field in IT0009.While saving i am getting the error""Please do not enter data for payment method Cheque papel" and I couldn't save the record.
Then i deleted the entries for bank key, bank account and bank control key and IBAN field also in IT0009. While saving i am getting the error "Fill in all required entry fields". System behaves as if Iban a required field in IT0009. Our bank details infotype is country specific.We made it country
specific through feature P0009 and setting in table T588M.As per our conf setting IBAN field is optional. Even though IBAN field is optional, this field behaves as that of a mandatory field in IT0009.Iam facing this issues only for a few countries like Spain,Italy etc.For other counties i am able to change of create Bank details record for payment type C.
I have checked in Payment Methods by Country in FBZP (Payment Method Classification is set to Check and BANK DETAILS box is unchecked) but still no solution. Do i need to check in any other setting.
Please shed some light on this issue.Thanks in Advance.

Hi Jobish,
It's weird but I tried the below method and it works
Here's what you can try in case you do not want to enter the bank details for payment method 'C'..
Tcode FBZP - > payment methods by country - > select payment method as 'C' and make below changes (make a note of these changes as you will have to undo them after saving the table):
a. Payment method by classification - select bank transfer
b. Reqd master record specifications - check the bank details options and select the options which you want to be entered (a/c no required, IBAN rqd, SWIFT code rqd)
Save the table.
PA30- > Edit any record once again and save it.
Again go to FBZP and undo the above changes, i.e, revert to the original entries and again save the table.
Try editing the record now in PA30 and it allows to save. This is the second weird workaround that I have come across and still not sure why
After above workaround, I didn't get any error while maintaining the record, for this or any pernr.
See if it works.
Regards
Neha

How to populate date & time when user enter data for custom table in sm30

Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
Req is
i have custom table and using sm30 user can enter data.
after saving date i want to update date & time in table
Pls let me know where to write the code?
Thanks in Advance

You have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
FORM update_user_date_time.
DATA: f_index LIKE sy-tabix.
DATA: BEGIN OF l_total.
          INCLUDE STRUCTURE zztable.
INCLUDE STRUCTURE vimtbflags.
DATA END OF l_total.
DATA: s_record TYPE zztable.
LOOP AT total INTO l_total.
    IF l_total-vim_action = aendern OR
       l_total-vim_action = neuer_eintrag.
      MOVE-CORRESPONDING l_total TO s_record.
      s_record-zz_user = sy-uname.
      s_record-zz_date = sy-datum.
      s_record-zz_time = sy-uzeit.
      READ TABLE extract WITH KEY l_total.
      IF sy-subrc EQ 0.
        f_index = sy-tabix.
      ELSE.
        CLEAR f_index.
      ENDIF.
      MOVE-CORRESPONDING s_record TO l_total.
      MODIFY total FROM l_total.
      CHECK f_index GT 0.
      MODIFY extract INDEX f_index FROM l_total.
    ENDIF.
ENDLOOP.
ENDFORM.                    " UPDATE_USER_DATE_TIME
Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated.

While Creating New Insert Form Existing Data Display from the Table

Hi
I am New To Sun Java Studio Creator and New to Java Also While Creating New Insert Form Existing Data Display from the Table while i am Run the Form. Can any one help me to Solve this one

Dear Giri,
As per your Advise, Literally I have Search the Properties for the Components to set value Null, but I am Unable to find the Value in Properties palate. I have tried in various options like
In the Properties Palate
TextField1_onselect use Value null
TextField1_text I have selected use Value option and I have manually Keyed-in null;
In the JSP Page, I have manually keyed in the null value below said
<ui:textField binding="#{BI.textField2}" id="textField2" style="position: absolute; left: 240px; top: 96px" text="#{BI.bDataProvider.value['ISSUENO'] = null}"/>
<ui:textField binding="#{BI.textField2.Value = null }" id="textField2" style="position: absolute; left: 240px; top: 96px" text="#{BI.bDataProvider.value['ISSUENO'] = null}"/>
At last I am Failure. I am ignorant of it. Can you please help me on this where I have to set null value for the components? I will be very kind of you

About warning "enter data for payroll past retroactive accounting"

Hi,
When I am entering master data, a message is coming
" enter data for payroll past retroactive accounting"
although i m not enteringh payoll data,
is there some date setting whcih needs to b doine to avoid that message?

Hi
(Assuming that you have not resolved this.)
The message Enter data for payroll past (retroactive accounting) is generated because you are maintaining an infotype that has been flagged as payroll relevant and you are making a change to data that has an effective date before the last payroll run. Note that it is only a warning message so you can go past it.
Table V_T582A holds the settings that indicates whether the Infotype is Payroll relevant. Be very careful changing these settings make sure that the Master Data on the Infotype has no relevance for Payroll.
The Payroll Status (IT0003) Infotype for the employee holds the Last Accounted Date and the Retro Dates.
Hope that helps
Regards
Rob

Want to create RFC FM for Getting data in CRM from R/3

Hi,
I have made the RFC connection in CRM system , now I want to make RFC FM for getting data from R/3 'MARD' table into CRM, If any one help me how to do this.
From CRM system I will pass Plant & material no to FM and I need Storage location & Storage Bin from R/3 MARD table in CRM.
Thanks
Bobby

Dear Bobby,
You would create a FM in SE37 select 'Remote Enabled Module' radio-button in attributes tab of Function Builder.
Select matnr werks LGORT LGPBE
           from MARD
           into ET_MARD
           where matnr = i_matnr
           and werks = i_werks.
Note:
matnr is material number
werks is plant
LGORT is storage location
LGPBE is storage bin
Hope this will help.
Regards,
Naveen.

I Want to create a formulated form in Dreamweaver for a Muse site

Hi,
The form I want to create is more of a survey where each answer has a value and the values are calculated and displayed on the Page after pressing submit.
How???
Thanks

Hi Ben, I just sat through this and not as helpful as I hoped.
I need each answer to have a value and at the end a score to be provided.
I can do this with Google Forms but not display the answer. I have seen this form in action so I know this works, I just want to know how to do it.
Hopefully there are some more ideas out there

Want to create Monthly chart with weekly data.

Hi all. I'd like to create a chart that graphs data over the course of a month similar to this:
but where the data for the chart is only gathered once a week. I know from reading in the forums (and trying myself) that if you have missing data fields in your table, you end up with individual points that aren't connected to each other. So I assume that the solution has something to do with how the chart is labeled?
Can someone clue me in on how to build a chart that shows each day (as above), but connects weekly data fields (as below):
Thanks.
Andy

Hi Barry.
It looks like what you're describing is what I've already managed to figure out. The problem I'm having is that I want the bottom row of numbers (currently 3, 10, 17, 24) to be the days of an entire month (ie: March 1-31). Then have the values in the chart correspond to the proper day (3, 10, 17, 24).
Here's what happens if I create a table with all the days of the month, but only weekly fields filled in:
I realize that Numbers doesn't automatically connect the dots when there are empty fields in a table. But I can't seem to get to a point where I can have the graph show the entire month, but with a line connecting each of the weekly values.
I thought that I could do it by creating a custom label for the X axis. Here's what I tried:
But of course that didn't work, because the chart still only shows 4 labels (due to the table only having 4 categories). It just renamed the first four labels.

How can I lock a table so that a person can only enter data, not manipulate the table?

I don't want to Lock the table as Numbers does it so perhaps locking is the wrong term. What I want to do is to lock the formatting of the table so it is possible to enter data but not possible to change the position, number of columns etc. I've been searching and all I can come up with is the regular lock function. But I still want to be able to use the cells. Just not change formatting.
Thanks, Brad

you cannot. When you lock a table the whole table is locked. I would consider segmenting the user input into a seprate, un-locked table and placing the calculations in a locked table

How to enter data in a custom-table

Hi All,
I created a custom-table in sapCRM system. There won't be a place to enter records on the screens. So how can the users enter new records into the table? Is there any other way they can do that.
Regards,
Ranjan

Hi,
In SE11, on "Delivery and Maintenance" tab, make sure your table is "Display/Maintenance Allowed". There could be other settings too, but i know only this one.
Then, once you inside the table, hit F5 or in the upper tool menu, choose "Table Entry-> Create".
Populate mandatory fields and save.
We have done the same in few projects, but only in the Development environment.
There could be other security settings you need to do, since you will be creating entries in Production.
Regards,
Vadim.

I want to create RFC FM to enter data for employee in table pa0001

Similar Messages

Maybe you are looking for